From ba67ff7da743ff28f6f5d22a833873c515146c69 Mon Sep 17 00:00:00 2001
From: liuyu65 <liuyu65@126.com>
Date: Sat, 22 Aug 2026 17:20:02 +0800
Subject: [PATCH] Design Express Res initial commit

---
 AddIn/deploy/DesignExpress.Core.dll           | Bin 0 -> 99840 bytes
 AddIn/deploy/DesignExpress.InventorLink.dll   | Bin 0 -> 47104 bytes
 AddIn/deploy/DesignExpress.SolidWorksLink.dll | Bin 0 -> 30208 bytes
 AddIn/deploy/install.ps1                      |  83 +++
 AddIn/deploy/install_solidworks.ps1           |  59 ++
 AddIn/src/Core/AppState.cs                    |  96 +++
 AddIn/src/Core/CheckEngine.cs                 | 667 ++++++++++++++++++
 AddIn/src/Core/Checks.cs                      | 115 +++
 AddIn/src/Core/DesignQuery.cs                 | 208 ++++++
 AddIn/src/Core/FitForm.cs                     | 199 ++++++
 AddIn/src/Core/ICadHost.cs                    |  17 +
 AddIn/src/Core/KnowledgeBase.cs               | 235 ++++++
 AddIn/src/Core/MainForm.cs                    | 190 +++++
 AddIn/src/Core/QueryForm.cs                   | 264 +++++++
 AddIn/src/Core/Report.cs                      | 251 +++++++
 AddIn/src/Core/Snapshots.cs                   |  90 +++
 AddIn/src/Core/ToolIcons.cs                   | 236 +++++++
 AddIn/src/InventorLink/AddInServer.cs         | 211 ++++++
 AddIn/src/InventorLink/InventorHost.cs        | 458 ++++++++++++
 AddIn/src/SolidWorksLink/SolidWorksHost.cs    | 326 +++++++++
 AddIn/src/SolidWorksLink/SwAddinServer.cs     | 283 ++++++++
 AddIn/src/SolidWorksLink/SwIcons.cs           |  34 +
 README.md                                     | 113 +++
 23 files changed, 4135 insertions(+)
 create mode 100644 AddIn/deploy/DesignExpress.Core.dll
 create mode 100644 AddIn/deploy/DesignExpress.InventorLink.dll
 create mode 100644 AddIn/deploy/DesignExpress.SolidWorksLink.dll
 create mode 100644 AddIn/deploy/install.ps1
 create mode 100644 AddIn/deploy/install_solidworks.ps1
 create mode 100644 AddIn/src/Core/AppState.cs
 create mode 100644 AddIn/src/Core/CheckEngine.cs
 create mode 100644 AddIn/src/Core/Checks.cs
 create mode 100644 AddIn/src/Core/DesignQuery.cs
 create mode 100644 AddIn/src/Core/FitForm.cs
 create mode 100644 AddIn/src/Core/ICadHost.cs
 create mode 100644 AddIn/src/Core/KnowledgeBase.cs
 create mode 100644 AddIn/src/Core/MainForm.cs
 create mode 100644 AddIn/src/Core/QueryForm.cs
 create mode 100644 AddIn/src/Core/Report.cs
 create mode 100644 AddIn/src/Core/Snapshots.cs
 create mode 100644 AddIn/src/Core/ToolIcons.cs
 create mode 100644 AddIn/src/InventorLink/AddInServer.cs
 create mode 100644 AddIn/src/InventorLink/InventorHost.cs
 create mode 100644 AddIn/src/SolidWorksLink/SolidWorksHost.cs
 create mode 100644 AddIn/src/SolidWorksLink/SwAddinServer.cs
 create mode 100644 AddIn/src/SolidWorksLink/SwIcons.cs
 create mode 100644 README.md

diff --git a/AddIn/deploy/DesignExpress.Core.dll b/AddIn/deploy/DesignExpress.Core.dll
new file mode 100644
index 0000000000000000000000000000000000000000..1fe15591951d93a90ae736a26d56a3a03273d6ed
GIT binary patch
literal 99840
zcmb?^2Y_5vx&PTIcj}hAvzfAOHhsus(;=I_34~q}N=WFv!@yaZ4m+$=3kV7#0v00j
zP>_d;3d*C11+1W`s2D)`qrAuSVaJyIf4}dXd+*F-DH{{mbG}o)-}il|-*eABbHEYT
ztFTfkg1>FslzIR@{|$@#=FS+B+lpUlQ}-vnH~E2<{l7Q)(9=#I88}y0PSwYsJ#gaj
z=bTeHf8d0Z2lNH!44i(>z#a!3GH`a~q?6~gwkD@p=yhwAI_avAy6oiloZ(4(O-&g{
zg;Gk5wHU>`gaIKKs}$)_kWBsM-=j!HJpYB&@RhzL!x9Cj!w>^r*pCS!NPVJ3J!Nqk
z6LwN)K&id!pyr%^^2O&P{OYC9A8BHHlYB%UH%E`?6Ok;sK}V^$%i!1j8-~$y^vP#c
zn34ZjCj58RcKOy&hmeY@cmECbaHmp@IfQFMPJgK6D3zSmGcTfU0VnWWRZBq65s*&O
z35~*!IN?!No)Z~G<BK@aQPf|=X^V_T#gC2x1Yu`1M!y0#sZ=eFK-bomRBUj$(7o68
zKtej6)xbP=b37N?9M5Y&fG&hL$GbHe5$K-i=6DIr$;uk&pwyP=3^+>70=G1Wz103U
zs3<^Mdgg`IO;RS%JCr>%oINy>Jv5p<)EH5LCCOCz=+2fB6iOzQQ>Dh~`0Ukjoq@0t
zBqj%Y<GSDna&cYs1D)l3X!^dnjfa-=VdHm1j3190Unzj6fzp~7ym?D|XUo<simIp5
ziYWD*r*lXZ)LB=mc2*8`{y2OTC3HpsWw*9~Ii+VpY<dWN0BM;>HWMwM=0@D;El@pF
zX#-xyDKF@BN<c}bC>Dj0bb3lIJcE%zWG6z?2b~!PZp#t{4wy>)9*2I;)+{Q|*H5|8
z+{R4Qjk=NdpT0GMOxGC3vQqI`Qr;moPpv-B=$?V@>!2SXpt~=o(ggt>DkQ9?OlO7k
zF0iMkG6_k8y&*j}2(^XuDnC?i$*E*nInoAiM5UsJTon<h_2JyLlTpo7Fk77cQ8!x2
z0xpU2$idGzLyN)SI+Z*^DHSt?nTffv!RSygl48{(plmTIEiV&y(e@64<jrn8r;j&8
zUY}}+f<D_2-TG2P^ysS%(W_Bm<m%I(GDN?=+YrTs{<5J;C=@5HoJ=B{Ne*3uQgRb+
z@|IQ=k5xB8ixS#cveFGFA#Me|f%PWpZc>qTm0m;)%!b-qBVPRS$n<rYR8OG4o1*dt
z5mesvB{yD3Ak?k@%j&}Jvp$!JY+0+^Bx*S6Cfx*Un9`P>xDAsBimea1B;vuX+qP}#
zavc<)s1rw`ZNb@01Z}~M%vufgIK-9kcOaC!5Pzt5`8Q{zA5dc)IA&$$#T3+F&vljl
z1{6w$s%SK{31h)biE{LJkf47=hkZ}KNav4mN|52G^7QSpvA^nY3mkS7lP%<wAk$Is
z(M!ZnSs#7UG2$JaB3FjaWZ|dt4mdstY!znoGWhIa4!f?REeE5c#%N2ZdI+rO_D8Yz
z00E<zzFqvhzFYi){(|_@9Fk7ZB}^AJ=7;rz$RwOH+UUm^d=ic|f3lcgpN-~QG%2BG
zZKSC}8)>O%7t&DU1^v^vqs@yHPmVX&CdjtEHix2YQn6-pXB#yOexbc0>g4o4#7FZD
zu@I%OQn6AL1>aasF{DdoqggwHQ{gm~Q;?0CSvBg)DNtaQ2+ZmA;^*}y@!z7hjzuQn
zs4JhK6_&l)3bJiqK8G~4ol~tAm{(zbUSBDGL0>EWTWE6wG6~0<YZGJ}Uz?yzZWXCH
z{Z;Yv`ti4;#doL$IZOxs5vdp9G}TOytyv3nu*|%K`VRURhAZ~3!%#*^4niFM9M>6i
zMovMCNIKP{*}9zSG4Rq(^;meVPW3o=nTS(8o_;izHNz(PX4&rZXDanCI+NMLQ(-tk
zy$!`Mgn`W$w>_JTO?_lL9F8$<=qZd0+X<j`#niPxlp!>$PX@zgH<pWCGYxT|^7=dz
zRfuO7BsxQ-BF4;eR9}f$h4gOy9+TdaV0ySYy;t9A()-*9Genv*U{W#}iV4h@$PsPM
zQB3N`OqS9Bgx8e?iXmi6ed$kNAC^idvRLa&^IKrmPt%doe4bQYX?{$&P5@V3kuI<W
z74Wi1O_}Jw0iiURinK?((k&mc9S4iHJ1AMFN*P|M=JZtXvUvT1F6fyis@X^tuWKXT
zNW2(%^=dj|)j^~JtIDT?$8R9p^GE~PM4lVq*tWl`H6ehe3Hm>gBQARDFEaC##wtkE
zDd)AsZxQ)vI^!uf^g$Fk*tXLzU=#g*Nq|36qzsAWW4t2v(WzfgP{g7t8*joZ=Dco?
zN--Cl>PaYmX|KDOsODmxg?=4ZKc;T={d#uXsh$kha?2!@vb{AO_xtJ~!1S(k#MITK
zf_fNw58!NH1(R110h5&QA&pGs!>yr>*^HsBiL5a*;dRkOULOm9%?a3uaVN4l(XGYA
zgt71<B$^U5YlDPZjx`?^9^Tr(uG6sC%Ie#RgteEx+YovEMMD(yR}Imve{2Xd+-FmE
zdY=kRcEyyN8azfh`p?MaFBTaY%B8Gb|3H!sJ8)=zY_L_k2spCT#K=-aK*a{lbcpbY
z3>yp7&=d?+O4QV665$7MMwX-Fr{fijSjn7eRuH)KY2;Md)_7$Zl4Y@v(P=vJ%t&O?
zZaTMVEyi$J9Ac@c4#r>kqBqb{|A?|)fn(d^1>>5c7srq-sQ&VS<7YddDVx_Wf`X9_
za6Gf!0LKc2f@Xmk)^DCunjC9l>7nR4n4-AM$wXZ9d?JrJUR5oqU+Qqdoz=3~VH=Ru
zj+?a09XBa8P8e^+BbDtb|0!zwpL8%ooU3Kc^H`w#a;(NXqj;>_AGMK**@E$z+?f7f
zWQK}=r57#X={e~-w%W}k%SWNv2{$e?X}Kk<G6@&sh|B<NVM7-5UsNI%ha=sq50q<$
z1U(<L8Nrs2G6RcOr~#i?u$~A(HY@v784Dnr61@TMWM-|<kx}4sQb98q`W`9)YM%yH
zbQAM$w_Ib)v|(8Y@WE1`*H~i$XlWB40<;^ygi!iH&?Sh$^hgSiI7$5rQpPNAN(vBI
z9F0<ynitb<LY-S4&~xE!54{4h0<H8RBn4Z^^U@;pMLf88<A~WQ!5FDeMaIpsoIX$d
zyuL{Mf_|U)-TDLK_vjCcKi;|#gJr`aoT%~)4AkRc#b&HaP!sSQxH$;TKFrY%0$2v0
z!95)PUw&Y*qaXJJvmDXGWb1SElYUBvqkrH9&`;RXSS`?Ls;!hCBU%5F4vVz@0mtv5
zK^CdE|7GTK(knoeUtHadmVgI7mLEH4(_<H&Iva|BTTpNE9FlarUg<xshV?QC)VtG>
z7JUe*5nqY&JZnynO`0z|qNCr%eA1>K_c>-^A1J22f;NC>Pdq38f`G5k@yFq$<Bh}8
zjH5%>Avb1;x>2~rjKVRD)sknfS(l13x-SJZ!4+MmGg#M^Rs&7;<<diQKq|jKwd%#l
znu(}5w*%NY6Y<VSWi>{dR<)&lMqN&B%O!lqtzpT%(OR>b0*{6xvkLccn(TQ5tsar}
zlgch=b~Cm^j1F;QNG06J$Rdt;Sd=zFozHaFsm?*|S1>y#GwGo`;yTkMOi9?}P;RUW
zDuR(ORz+PzO1l#&QB0e?l~%Vkt51Zoo88u&i{(vgURO-8;KnW?M=(ktwOdzBY7Yj^
z1$lirLT;k82S8=bAoYzY_XCK>;=Z+4f6nCZgM8EiCG_jZOdQthvFdCSi6uJ6Z6p^{
zZXBL$g=UhbPQQUpVk-7~6d0>waE}B6-8lAnV%0%Jn&Bm6v%sSXm~gOZ=t#LhUXt~-
z^jU8Hw0EYrX0crJcLwz@AwZf>cX6Nu#AL5+4WV*E<ua+EZ~trCHWc-0R0;om2!Gg>
zQ}^Hx8z|gM#>2f*hk}@kzsnI|JpZxJ{v2`GZ$aBnrPaC7zzA#?@j);Zn~j|_KJjtb
zNK5Eg8*0U(+<ROZTr5T7=nP<V4;`7T%Ao9OJD981BC=tws%Mj)JxYKZ{A}K=$mbw4
zkvRHAW_g8<KPzrGDgG77;nIF6Y*~z1nP!-%M-Z7Ut-u<WBdiNZtDsrSk`P)f{S*t(
zHeXa|T|u1GSGR&Mf{!bBR5=?Z$h_Xg#1(oGxfYSvp!M*{v|BGTDLr_!Y)I+V2bdID
z0b@%#rVl|xCTh$4A_VlMbU4PiQGFd~Z)P+5XWxXnXmP0LZy~K|FOX4={vH8-#HKAH
z{EMW5kqQ$*b2cgW?e_w)_buCaNEW}#`jf1W&0~p2GZi1(#^OUN_6m)VA5)iK(veZ~
z|41!s^Nd1!??KyrpJ~gk$|kd^Y&zR2>SD+YRX3t?Ds$Pl5<~xh>79wvJcgne>g>)2
z)`r-h#?Yyp+{UCEtsV)UPNy?wR&-dK=|d<nWow=Jomg&TsyrV_o4lk!7a<mymr)jS
zk~yB+m@Y>Wxs9zJmdxiFH)1xKuSeet7D;3|*o|aTeP%4gl0M6Q=5!9aZGvtf^ZIzm
z1yQj2g6!5Oo46hq?JM1@&o)6bVnt~Be3}mYrGGYqOk!&mR{4VrH~YALrUtX50>b(N
zfap;=QUTYI3L3)@wsBPgGm_zyMIO1AZpSTc<g4Iz%p>>XAkBjH*Q8K`jvB&v>OVje
z=IHHUSittlm~(^~Q7|lf`wp#ngO8|!{u_`%bjt){9vTB-<s-KPXYa2A_nx)^?zRh3
z-j`R<yO^l)!DlINf4-lM4uv!if8Kb@HhTra82r%>S(<3Kq3Q<IZCYk|OwNNN*oUj0
z&gQ#-wdR!9;2C2f$X1mo9f0CuO)=vxijC1}eqX_)Rwp6TmrQ?nG6n*s2ef{qea^go
z!g|NAe?DHxIL`EUm@XLBOJJy8O^0<@xAUV9k|Jo>Q#;&56*$6~5<eX=rh098R|$1F
z9cfV?Al2UCWm4sHQ6vcJ_rUQcJ3gFY!t+d?X`uquWZ=GmY=JyGQZ-wkA7{3p4Xasv
zj~P<Cs6#IC-mAsbXHjo>mFKFFT~T7G*vQE!@^m~@U5_dmWj6$U2x-340(~fH4ju8z
zZs1TcJNPV?fc^!9b}GK#wOi_g)&|#wHU&B?UcCz_GfC;)LE4$hjJaVQWM)Uuhm-9C
zel`q;7!MPwg0_XhH)vbgbi+^>!8_Q9jDu)Pb`)flhstZ&loHjWU`Ab2aAW{0joZXJ
zorDZZ_3aGcGSU$9CN#51<1l0QjieQN!^|VJ<Xd#4QT&2bP(?$ZfMxMm&;S<O!VB1>
z@csxkyP5e9kY;?zbo#}3)OKuj;|XT-Y%IRXZm~Juh~oG=nNC431lDHP=|=N*O!Gd#
zNB7>(7SuUcd+jK$o<m(gH$DrofBXCCXwZXYuZvv`5PcmTvHl~Z>a4#N7*6#}u;)z?
zka^h~Fy9Skr+OAL>qkJEC!IPlzAQ9gX3S>S8eC-yCQwAm^EZNZHn7Z~-IDPOm6RE@
z|Ao3SqZsDias}XLfFWKPLc?#3WukT(WAVCClv^%QJqH;;<#iumKok<yiizsh(@j)Q
z;*xU_rRP!*)K4N?uU=vjWlBpaHcRYcQe0&TvdnFd)sKQQ0mHhbr{e|db_R097;iAE
z!wYs>*NWU&A?6Qj8R{hkpzy9dp^ibZVu9n=v(%p~M&vavmx`CMpd2%%FJ<9)0U6+9
z<+WIHEJQpOE?D;+XhsUN<u9gM<DLLY@NT6oX1A84qA{BTM8<eX9K08uFSa$?Fviz!
zP<y@aa2TVHr6cX{Oj31C=1M9aKPz$8kyvSRT^7~>2OCPiS?S6f{VJIGQrw#=@jA`C
z62MDwTcCI|{yvkdrxVX)AZ-oDd+iz~-iMNon;!OIrrVOn0$IlDrE0_VULT98PeQ$&
zIac2di49}*RBLs67YZgvhgLg!5M<K`9b}OadUs|%)z8Mg_?@rsXMsPizS}50Hp$nw
z2V|4JK^D<>F*9H7XEXaE_o95UXvci=QKSUV3^<=MQ=%OGDf0b@bCSTkNGfPSn2E_*
zpN$3Be0~6n(NOhp_GWBCpc|BPm`Sh)o=nRUClrsBdeAG-#v`Q_>_CaZEoOQ_qwrTT
zp%T_ya$vx;m2=gMn@n5by6f6Fc5P^jUFdOG(w~KL9GSe=SQwei`r0Xks~319lX<^l
z#{FctdLiNm<KgN>@MYo4gDzfqe1YZhRXVaVd5lzDd7Nn2<aEdOEK-C&ZDN^ci!eZz
zB76ne!qtnRgFM;R3Bf6hJ{Cl{dI?ff;p)5Kg{xP<-59Q-Pt&`~cvl<m-S8?Lnl`3m
zjf?tv+x|?={zXS@i)9;aJH{#+WTT?>#a#pki`#oeh~l1Uq6*%q;dI+qqjs7N$}U{3
zK})+jp<0Wryv5XG6&<Q&vYBb?07RM>n*mJuoN#sY?Ex{H0Xo(PI**hLN`Bi8<V(d|
zNlgNIR>==B_M>zp6W>9GtC#u$K26vur~v&%QX(K+ts<S9e>^PoEsn()(Zkg-#8y@!
zZzf)z(-|+VBFU-4FxY*-7gm*e?M%YLlBZCG+{4Vxm~Ws5#kXd$Ui5pAx68uh1y=DN
zQ|DjOVd>fpmfujx$y7Hm)Gv>KLrnb}d4p_x<zvQ#AfHS=iCjZIo2e+Vbn42D4cb)9
ze59Ci3nZ8ZZx=Z<WtPQSMws2{h`<9#1#ClKLIH=XmjQdwcAB28K?h&H9f<T+Q;~r}
z@-AH}@<^&C6<I!ZJ6;-N7a<&oj95EM)~!H|DPFwyLVcXBaXGXer)yk96ECI1$_rPS
z%@o|V)b5RHFkq8H|1trBg0jYZgR$SEQ&%$_WQ+hFaA>X>%lT6>Jx@pK;T2Nb!58z4
zrBesb!RsyI7m{fi9f4m<DmZ3lb@(u2KkjGxk8v~op0R(ULmlczvRJ{4WM&}sDk!gA
z6OY;BYEM-RcyBVM)pzmJTcnFiSzx0oTzwBPyq>=QI6eKAkMQ4<jXiyek`1S*DN=9q
ziv1ua)dl2+ao|6;9|s`%y*pd<WR%R?5M4h6EwXjB3t07hI(0+PGKBF~Rk~Wxc>KX7
z;F0EYIJtvt!5|dmdy_%vRB~77FjGUneFv*~hV0*>-(G+`sPBBZ`p&xef*v*TW?dVo
zF$?wGf)@fI^}W!lbXc~DLh8%T(Oof1FNhs|ouPT=_c-LorYW8^W+%et`JK-?cs~}&
zCd+$;s^>v!Slq~_1$Yy#B}^CLDWU3!gy}{$&g%?S&zCUW$i}T9E@tEmFxRTX7`kGz
z_M^U7`yGN@6FPOd{V~L}qu+y)kOj+jh*v`l&vAZS{BciCj*EC}6Jl_l?iD%Q_y&g@
z8@dM;l+f*yZ;13JrxnN5>Fy?^pxoZZiNkRbzu1HrSotQW2FFEu#77$ER4ixauznI*
z^wV^t^Zb%j&}z$N>6i7{*e|u)?eAdqfi!a;o{{6qL0iHmzqc>du-K2655&mE#Xg3r
zSXEY{@?4xKPr}aiLL{JS<^nKob~6zv&$-+u=2HOnvKyXrfyQS9+06cw8Qbcg5)77U
z&US|aZ{NHF=_&6(ddfSHp7IW)r@RB{Depjf$~%yrl6UrYv$d8)N6DnKnbslskR$E3
z;`Di<3MC`<9DSSHCg<qe<Q%<xWFY06aj=TZv}ZFN<wb70+i^=KhJ!xcu*Quw9#*IE
zNxc4xx-sk!Pf~6NPM3GM9d5gvE@$$?IDBaL^p{A5iIc$lQWZ&5({N4gE=19~b#F`S
z=F0N2H(->d&tYJ+KxebQF_0zem=!kXH)gO|@1{MSmi`}JKVZ;n!OAqG=BOEmn&-0+
zo-&U;-+Qi)sNsmhmm10~X0OF$70P7YY<6S-t67{V_%K9`(gsI=oFol#^yf&jgt0-F
z%}HJ~{^z~CG5s4aZ%qH$%ZsgsY+mxF<9c$B#f|G-ND?=$myjebUIAwdlD9RXam2#t
zkkA)-c@z3-FE73U$aYI!IimDQFE=)9?)I{S{;HRsuPL%Uh5=ir`lmiaR6p-CMD_pp
z4A@S~_8JB(AN9;$s}Jb8q^UgURivpsUkqjY3<FjI`aM2FOn<;<i0RvX29`~~Vc?6f
z2YrUPe#~cx>!*DN7Em!^IB<$d|JmnA=zsYf3EkS~>BM3xCJhG~tS&Q!H4AznX|W=y
zclSB47nm)k3<o-`KGo+)$u5@RNNIdgVeQ82vurVKIPgAAU+r_G^>w60Mp}Qw=SY*I
z)o`Hk>c@PJR{f;U(W-ysbF`A9&2XS+>)-nvZTfFMN1G1!ds?-Tqup?{yX|@|Q^fLi
z*|jlRwd=(`M>{z>3<tWo#)lr3qeE9oiya;MJw8VVIb6fxx~~4D&*AF3eGXSY=ySN_
z=rkOiZl`|Q=jhZw^Eo>8Z+wnUa%2og#?9zV(bFoUdq|5`8C@nV?Jz@*F2m8~cInf7
zjxIUYV>r6>c|J!MIVKs7N$w<lgU>NZ-%46!OwwQUIVOQ)jDzqj@4LFpypVh^gJA{V
z)wLmMcDr~yO~W_(Tty|F!Q{v~3^HTPAm2g#73(dGzF2Q{t(P-8{w_Y3)A206e0m01
z9InxwRQ-2Py-Gg~h4k}qvc-9FaAOAZ-@*K`$||^cUyU!!fRZRr!HJQ?Ej;Uk4PZ0`
z|AVAZt`*-eVH`!5a^v2YLxWEx<PpB0baY@GDdpAp6em_0hLH7Y%S<f0brJb+$Y%|(
z&3=*5ti#uAOREa4v+snQGK_Z2dkv*NuUa2bGZEF|mFH5-;J2WVxE;?8w+y~pJOhSd
zlg=H%wwZ%Z{4QaJyu8WgS-1I+&l7aZ#OJadFV*nkX$c=f9aAZl-JzW&_wY$`#9^z0
zZ8v9REut%jl0*5mOKonYHrNXGz88w96QB>K8FvKRbfOQl<a~X0Ko2>Xu+_nq+Z*d~
z8};aJ)&tvd?g*X~L=R>O^f+MR<srK#Tb*|{>%ns#5%o0e?uR`4>E)g%FtZhc;zoNp
z8uDzb95!`7v>6;Ddm$fY*D8`Ld$a7ZR42WUq5mJ~(!QWuJHz_-4D5%1b|>3;zp}sN
zs~iB&oLGjq{n0b<HX~U%h<W>vw}Sqa#M^0!E*%RC%6NgzJSEhZqww`5a>eRfsMS)<
z+Mx7eB<ee-vP;?MSu<3&bU0Z-<$NmdQw2+TO&4VpRd|$AShC_B@4*nA>`JK`mK%{w
zM>gY@=VBG*-hvmW@haL+WVaLuRA6LlST=hxGU6C}JjF$qi;ju0)$Ndu$&|;vL4bkX
z(NJbXH>?=$gVLjTri&!>S4egU`2<O{TEsp_vXf*54_YYxO#9G#LtqvJc7OdB55rB^
zM^KEpSsj_iXU+^hMx?s-Su~T^aT8yNiS}N+Jc5dNAo}t_bA2xgxSj?^GH2#AphSB&
z8N+OY_ubSV2?2oF2{ZsnYk~pbL_OdGq+*w#<m(Rc8K_hpR7%fbb{2-4YJlPlexMJP
zj$JY^4ph1hDy@(4q0$XdoZ4$XRBNn?VaS@*S_jaovA1J&X*B>-(Ou+UCOG?y&z=Op
zuJ19kWs9|sx?N^{&mF#7@ake0RO}3Ff8T;Hf`lHyNXA2vHH;XM%p|tHrS2rx{m5CF
zIL=qQk;PbhxzW0o*X71K<N6cON#2}Q4r5yh8sa3sAwFOm4i_YM_;$AGdqLx2VgvZt
zGm@tG+v-ei)A#!(x7jkww3n6Jjx)Yd^<qS+fyTarVc+(hMYiw6t5Xmc+Em&I5mW#9
z>EHkGfD_iOGA}RRyaPR4*MXLP3LQXowRT}*tOY{OY!tGnJ25+B1SUkR9A)8*?)TSF
zywz&78_wL#?lJ*4VzOi7)ISoPp?2Xox6`-p+*c<ClP)*pg#pLfnRy?ti*n`ecXQBw
zKL`DNmMA+q=$HJ`jryfKbPYx%TVq_%2RM%YC-X~xbLw!Mx>|A!4o`GYrKO)isaY^C
z_OsIgz_G`T+4r?FZp=V5#|=|x-uRH$vrRl+&7-CJ<4Lz3GVwi$>a@D}UcHBj?@Lst
z*TvV3GqF0g%{MTnZ^w+<Qlg^wy@B3*=2!<{qj!8fy>0bvuQ(FM*BlAstB!;>&^=zK
zd%SLpj0aWsbc<iw9Ho!*wNAt?VJ`@JtEt6A9b`hE!R#{BZ9nYRe5hpX5}FhoeKt_Z
zI;b}vfUohPQZZ@ufRlg2F)5QHHf6dxyPEM+b@(ZLo3HBjqw)hjK1O90ax+xA4k}$&
zklT;S-}IqcW0$a6nxR_jpv;L+Q-F4St{eEC@uAxE7Shs<+Uoe<WUxc=aL@Hj_?R2;
z4A7cb%ke0MKl){Sd^L!wPnQn}m*xnuhgnY;4Y2><cjK6T-4h?vkr~j0gF#(quzdkw
zyzjyM%MTlW!1~jyU$Xve>(8_P0_!ib{%+P^V*TaTAGZD)>+fOwu{~{gAM5XL;}5d_
zdK-VJ4R5gFO*VX_@rRGK;p1)kNj7|n4WDkqXBvN)&nfsfcAoLo`Nki+(1zb({DDi1
zKYZyh*STpNOqhatDRy6r88DPt;jYMz%ttjO9ox3^!=qdgdBK6<Q7+>g-OKXlD#n?*
zQ2zaK)hO2_UdGo}jSfi0Y0SuV0d`MT<ODnwv*17@xEGvez+-xj2OgXHz3=khKMi<n
z>M8Q?F9tlOck{rp)3PEj;OV#p2O7b>V99{T^{@x-r9_5B^LQYOn#c9t9yoSoRulxh
z)%%<SXax6y^9^`HAMAm9DRBdyu$qU4rC1XB2oD?^I4imZocml>ci<7;5ASC1vEOxy
zC%{ij8wm)T!f}iU<UPle!M(8+Jw^y-SStjeBE$=?v_hi#oxTt+t-}h5S|Ld*B&sj-
zg<wBzMXwQp>DLMYs0i`GyIUcSe!nloOY5>ioF*ZTzS$STR@7&NU|P0904hSf@Savk
zOyB7X@zOjYUR&}k!9e2+VQcC)LNJF~ApjL2UU(lXB(5L!g?MRMYf0Q%(q@Y*uAlIQ
zuvKBNkG+jgCRPeiMT!?bz)DHzpZHR|H1th&Iq;e;=vpZW{VQJzn-}&6MGBrmtQ4S%
z6dN91XQd?dYrYgOZ?Bb-oNC^bdQy`5pS~3ADXzetqDaA`ijhK8kz&J-9&DwgbaJL0
zJ-ocC-%3eYDH&@^N@tmu0|<}tufRT}NWoK#kwR3FV#C9SSt)5f&6i@+)D$ZvZKX`I
zQqp>!F9my-E3kJdQt*IdZ2_uCvEfG#w^Ca5N?(di^QE*lNom#l`ckmpxdQv0A_b2Z
z))t_O6dN8p(n@L58+|D@O<{bK+HbQ`3f7i3eUdK)d!#F{M=DaVM{1-HRixPP@Nrg3
zyT+QrjOt!qHN#42w^I77ly+V7rC?um1@=`%3iefPi2+rl*zlt#SScO)8efV{Qy5Og
zmJT}xV`AVKj6K?$eJR+BU4gw=k%H|4TVg;JDK<QOvX$cMyL>4&P0g}WTq^~wL8Q2K
zQm}u!0{gcj1&;yN7NCk08&;=VDV_R$Uy7GD$4cq6QczDKrBgrZ+k!pc71;9?DR_=B
zQiv*2Z1~Z$tdxv?%9rBh#S9@Oma$S$Pa-9wpYx?)pLhlKiA4&YrfrD<RixPP@VQn>
zmwwfkV$;+jE2YayK|P6-F8#VM1$)aYu(vEyu(xbW45%W-h6l8jGD*ivUK_J%zLZH#
zQYPsx=9RvW{pb}%vo_(IEF*=eBE^P3alVz3)zf?_Hcer=lM>5XDYLCDSv}8}lBE>0
zNXg{foRLCQkz&J-USy@@^sq0*rl}=XO3q3_YmgGl>HU2vIZ83Bl}z5v+j;@2NU`Cu
zs+E%0NBL50np$q9<n8=|)*w>y`ZQlko>I)RB~x$<Mha0yiVb5OC<{8bpfC2N*fh1u
zO7VCXS}6s6l`o|LDP!FCD^9z126nfnKlM=rN}I4{F~$v<;?!%g)(>S?x+}9I3pm$x
zyWK_?g|!hDpAm%3$_2e1DGZyL=4Y!$`4oh(ncsfBYLt&MZue$)WzK;0xIGrE!-DnL
z%u_8`PZOAz?t%3HEN{Si-ChfZMS^JNh0(i2GcWvt)vVWQ{<77q7hnYg*5~$FFig_|
z=7li~30PmiEN1rECiAKV>jPM~0qb}BEf{8F0rSFx7OcMstiK7YA7DKOtmqak7z$j#
zyzo2=R%`+*Hh~oZ)@#59+yM)Q(Nw@}cnob)%p9;4@QN)nFF&3Tq&5ct)@Q&byOS*#
z22BC;!f1K|Hn|DROZUJg1FYYGO>w7KFw~xadEs3x*pwzPFWm#10x+!5q}5J!r&=_O
zfr4hkV;EONwW&cNNp(&Q9*o4!sYFW}v}x`%i-yJ^XkK{8qD^Z;o7RLjjc6%@Hr<_W
z(J-b7nhlR(G!osWH=#{$LYq#sv_YHU&ah}0y9CV(FSBSfn$Tu6q0Jy#t3jLT&a`M~
zT!Lo9V;I9kH!mHfF6B0}32i3P+6-FBEm<_QE<y9cc+L<sFYKX}n$Su_Yd2`SxVu=i
z1s2T<4_mZdYzz6l)y+$P-L~Cbh}L1yX1TL08XBwUX2XwqXtSEoy!;;8ETXvvt?ZU9
z8s=a@v*EGTR=08!nwQ^0D-*5Lpv`t?TQszNL9^lEH5P4l6PlObLz_*sj6oZ82Q3=f
zzMy$wJcuDBf^;*2d*$Y(duW41>oRC_+&LBvZC}uAcx(@gHYcb<X(3*I4{Z+7CK<H3
z?p%w8wl8QlJiOMT&22*S@_T4=iDu`jdG0)mw$!3|;XN(dye2d+-9wv4G&@<%cjsF)
zw0+UdhR61@X!C8)`jc&MUKslyGKS12nw_l{xC<;A+P<K9VLU@3C4zLbd*Y#aVGnHq
z(d=}!&|PTJ&{_q}hR61`XbbJ6fXx@Fg@qQ~Lt98RJ6|nw7g;p4RzdT^`&+a{O=ydn
z&=wKRPFTCTyBajMeL=I~M?JJ%o6vS`Lfe&ScE;Mx-OcKTwl8QlJcg%Yq(uC5)S+1F
z<yXU|7Iq_=ow63Yi!B=3zMy&GgDjdC_Rzerhqjn#cFr1dhb$V}zM$DKpQS}NFWp1)
z!XDZX(Tb)oEOD1uG_-v|^TO*b+7jDO|7I=q(mk{#L>n+@OWmag4SSph&4v}8z(u#E
zO=w=ahqjbxlMUK3cbU~~Z;R%I53y*=n$Wy-4{aIIrWmy4?sAKUwl9|2@S`5ua@$Y;
zVJ-FYM{J!g2ih24kNGDeyqDdc|C!Lp5q#H&UFt}vbR<ZuYr~^M3`RzmNbIgy;Nnol
z4BWfA8%d!S3$>>T<w{49D^xm~9(SnuF7Q@xKzZzq>zlBwt{fwI3VgATyxG!m)<0hS
z9N+OHeqbzwSBNjP;MBp1h$x-J*kU@#FRk&xb=@ty_9hryQC+2y_%blBzXCxZ3ZYA=
ze(-Jpao%Mx_S$OECRR+#?Ul*OsT32-RZbH>RyiGhZsZKOl`|O?DxC!{Rymsir`WsE
zD1@VdPx!XQfmYba+b}I&+~OJLxM2>BoP!Lbb6Kucy7@|lpe9f`7qtDB0Gnr7{ghag
z$my31k=L&qqM$o=p|QCC4)2ReRL%=<vK1W!ibvF2X#@>Chia;fNG7q($`=C-9op)k
z6rGXtk*R`%J2brC8je#7yFsd{R9w*0Xn3N*@I-^*^TcqvzTpgr;r8T$7{1aNmD5KU
zBCjtqL_yzX2+v-!=RA8EXttMe<Jc==ZH0Pv$(hW1fNv~wBh99{5G9SoR4Oj(FePSc
z6`KX9Rl2@$3~XoI{l<cve!>uW{VPKh^q&mj8Ao>CI0l-HW865#iP&c2_!b&(kUZm}
z+Zh*aG%o5HcOhzj6weDVPTZ#MW&5_IHS5Rx#giIa8siLf(4zQBv(5*~Iom1cG%Dvb
zD7R3QqpPR+AfYNFnl)nFz%|=7e?}Wf8EbfkPS5h8+}OZtU}<dUxVopIG5F)dl#R&{
z&z2=eF<he1=;~{HFcSd->jn!GH*i^?mvEsIVsx{e@M3mC)9_4ouLwjG#$$-0t8c3l
z#fX8MsC$DniLRF>>|33s<4a?zS7p;^9mnI*MIw@}ytVb(0VA5NW1Lr7RR#u5z(}8!
zQNHqydc&CLiCRuk@1!V9L9mW)Gcw}_P6L>2WRl5LaJ3$n`D}sNSxnyHVm`8W<;!qf
zxdc4f1sOXYGF0#njo`Z!jv7v7RDh+Y^X3jO%r@lUQ>yz={<v6-Em4_5;W@~tS`IC-
z^unAdeWg+Z48GBp^FH3&B7Db>gP(4E5MM+*1c1_|$TVXp0#?(Wg-dSuZ2E-5<N9vE
z^?gjFMrW}LN7ABZeDZ=$ot@q09tp~BkGW1~7{`+KL32o#`*3dw=c>vWbU7c(i5531
z$v6$@q(@*jF1d8K%QT9eGaM|5jpF<md}p*Iz8f8d#fWg7QLGj~#7E2GCq{83jtP;`
zK@cIiD-I`;-eroLEyLWq$Tv$_{TvL%#FxV>C)^ABvI+5)eN2k4n@|tm5hmnni2Bx9
zcY70mS|YfwDOS1+vdYoY<rE433i_2RjRMkyt^)1-TmjYSRP_rDOx0VB=)Aqx4e|>*
zUN)08Ucn`Lbe9SBQt>`L#f18)IDV_Zd{J(7z8b=2*m{3AmB2Zx7BnEG@ZiLDg#H?l
z79k&JA)e<Fjz_hl?A>5JXN`Z$<<}kHES^)h_L7dCbRq@-qcZkWf+dbOCOZTCC6r=m
zyYAdLN>f>*a@4C0Mgep|9jM7Ma19U}=MAw{CN&vc(fsG2=nN8u;`gw8Vlo*P53IwB
z6_2RLv7@v=U;($thluA5M0{W+jj4x-H$vF8oL%dN)X!1wXyd34yIfx|yfut3?_#;+
z(4$E6qF37Jd~)d1b<z9S=t5F%i}rFKYN8|E$#Tt$JI2QKB+F;mxUo}gTyL_x!N%d-
zgeVZ{OP1Hzxcf$ITz|4W$HRMviHjB!$#TJCzSN6MCd-jYwqfy{{B=+oeHeD8Vz^Nl
zPYQC{g?=agy74y!f9TW-bG$-*sWtf97k}k-dMQde34agq_txvgAJ#{SKcr6+f1bWj
z{F1&(`~iKF_<4P&_#OI7;>YDucB356d@P3$3@gwrx1b|bOwCJ$a|>eOV$yuOh}y{1
zma+ZiHidJWO7BHuNtV4AsINU@zikXD<f*qYj39<yv@By|Ij_HI^?AYS<IJXAaaorJ
z`fy%BLAWX`bK`pZb16-~$Rb~EC7t5j%KIRLS8nsJEndE=!nk>;f^|w##`^UUUN2X<
z)(@+4IP9!9=j%TS4Kaec%6!<neq14<hW!bfwutVB*6Z;jHg06ei)ijRSHWiu`M_Xs
z2q8XjNNDK~VF@Dm;9(+ozZ)X>0AeE6BVvdb65)=2{8~+L*K`M1`|($vrB8soluU_f
zgg7;(^cjdtmwUxe>2oF2CVom^C?VCxUsrMZ&8>HsW3v2Q3Ev7_hGY==NNG>ZKA;Nv
zW)szoF*eqt?=T^bv9UfosK#U>STEn+>HCl&rN0C>ZG_mVrB2A#3`U-a1rM>Ch&@e+
z_rgg1f*`*9W{7`yyNI|KpnH%C4#0gw1!p4>+Pt-b<qlN&p~$^nK2vTjUl5J0Z~Vqn
zmJj&Wtwo*NTHfHqq-xO^Z9K0#Y%Q<U#{eWQuKB2sVJ8Utx1e(wVP@7=^o<jctF^2W
zW*zhev{%gZ=&POlk)*v)gUvrxBpm}Eck-H`m`IWZ2Zj<{1BtPg_gji*jL5{I`V5*E
z=C_@7EwF%!!J18#*Xp~Fj=Q)&PcNz;rsp8~Cnov@6a70AJx4opBzFhBsP3iblye%V
z`3SPWM6Wc_ShGaeNBJ{AwxI^sGwKb<!pj+5G@`WENYmXejuoZ7R+{dW+ZnxPnl{bU
zoV)j{0f#mQCo4$NM*%Xf&w?u#hnp(JU6x0q2kQ4yrFht03Pz@wzTU(Y%mUBE-DcwK
zqR+(LC2=@a-XJtBS6u@CUu@*8Z#=5e3mQOOgYX*wA=9$70_)en>c$fdiJNH5ctv(E
z)L@aJqoKsUVnW?m9-+V<H6a|;MzBvmVS=W>tg!ONe;@a^4Y+K*_!0|WTbc3pk0@xF
z2j9-vzT^qy-kPa>48!Bn+ffc!LA@Wt_;meu2+5W(se(?<Rp;g`odun@^c2tqOV0t_
zZRw?;dn~;-=w3@73cAnI$ARv*^jV;b2^+YWfus#w!9Yp^TQg(S(kknqYhDlKmdJ0g
z;96e!;V*uy&B;cs#NT@S9gn~B@b@nKeE@$n@pJfl41Yu4g%g%Gxjv$=hotpG57tNB
zBT;wOM}1wQZm5siB2i=YQU7FA8Q-Jl=Yha<Mz4IFA6_8gb$<9@2@i)g+c@%{FX4H9
z`27+d@WXdXxWf<MFJa8+TnCLn6Gz4`{RHB@yMM99i0fw%!G)OqQ*(-%&y?jMJq?7{
z!-Qv+q)Z9PuRk=ToFXZ4eY5!Z2{u{Ze-z^<9*{78HvYbwSxrRrSCD(XZJUjQJXRJN
zRLI|%L2k@Q4IK<HY`rXi9eA=!4&rwBDSn{C(X+jPeA$3&p82g<*wMQoUOvWJFXKaM
zC?P;c)n)gxp46OmOABRQ=4Bm(n5(=%lbCCoc{dC1JzjS5-tPqhURwDOqSwoykQzEm
zxSWO7%B3G-73vN@j3+#nf)^gV*wF)i;7mu)@&m^>dXXQ%9J<mE;QIYN{Q$1t-`@}5
z`u&6b01EghKLG7d@&bYOQov^*-WD()P*X#9iH`Sr*=hObnJ0y63wS$V`2&bvFSo9x
z$`?5LxAiQqdVxlk*My~rnKe~j<LGINy!HSoxKzRac@us-gL<Wu*@(8SsN5db>m-N?
z7YHhbwXgJ*!{FoHLPJ}{g93gbu!bdjq?JEjHx1Xu-;%;tsZ8+a2rMNBBf0bz+>eco
z3oKO4uj4WL2e?!cw-3Gz87p>%449zIo8MPfkyh%pRo?M%6Mo&st6>w4SU+w34(oSX
zziasI@yFkgU&+6`P4BgSv;1cME}O5JZ@|V+vHmpczZJj7=jAV1zFF3vWBqy7_sYT3
z!_)hXaAr60FR<Z7*7xjqBYsbQGv8v%zr^~>tlw;hr}sjezFQODavL7D{u=A=VSP`3
zPrk>$)TXaAKHdN;`RDQNWyAX#e{6pn_Vl%UYK=`_YtwChb&w4oZ2aLvt-rzg8*REL
zZ*Lnu!1!b9ZTK+jZ!-R)M;RYyYZd>E9dG>OPBgwc(D*pLtoU!tlXrv(dwh?cV8Sn)
zZ2aR+v*~9TA7@0lkM#@&ZR|U`#S~5$VQrC|{?y0OpUpA6WuS^}@?e<6b&cm>^x2GS
zmM#=OuWRBL^flsl>l?-I(YJ};tM3rMPv0Yczy6Z=*nj)FA(ArWZ+40)8SX)(WpoG8
zs=qCH#yEf#r}!%TP-1iXS@H9Fi}(folK9;gxkvxEgnRYx#P5^e57_MV>pw^sD!gup
zq*lAqD5&5VBCV5#Xw_|oXwz9kwCjFDbm$p|aP@3Mbm|3$$mk(Mbm^6bn56eGL{{%>
zh@364VqUK^F$KNR5Z(GXL-goV4AHC4GDM#~-w^%!orWmtF+&XKcN=1|zFvqij>)rh
zNS@zD*C62UQ<m0a7PfDi4<Tuu7e9?%n0aQsbrT@$-l6x-I9vK4nuaQ2$(XF%2q%fh
z$`U5{Wd2AHHwj_3G(QX)FPZsU&ja5@<1+h|H#2tRBXIGCxpE6bv3%uL@pF~i#IJl5
zUVe&FPplsK7|045Vsb{zkG^S5L-Z%S+-pW|XYS3CJ3I182JV1^Yt>EQQw)Sg?u0jr
zNd)_&bgddDkgNQMWRjFz<*xbw_7VB=m^|6aXM#Yka<>FZ2eTMsm3t7f*|L?-GHK*q
zxaqi+6tCAUH1eNF8(k^t(Dl_}AXmAM{GloX*$USBLE!U2AXoW95Xe^U4+6cFF9v~p
z<x4>zTlsPjs5}5#e;*aDx3Jdn;K03bN;OF@G3j^XCjEs;TgOd`?1rRHINJl}nKWhG
zB)l>@S1%ejiCmShK)GT^<*Uu=ldmB$UO5YStQluZcJnd~BOfZCZqBqpFL0W{WC|oa
z6omSFana9zAzU$yNSO6XNJKl$uO4}rNoNN6^)XcD7)E$n5Y)UBGfgC(v#q1y#6xK0
z5ipIeriS*k0BQR+4euzi$TROKOOFzLmNIL<Bhk<1OTU!{T6qkKm9H^}z8<QKJPtCc
zZ}Z4htnzil=zFQ=H$b6(NyHzTBc?5G%5hS2#7)f+pJ|TxesjbN%@MEr5sv5)t9+A6
z>8>HGJAQ^w^qYYQqp*!w-W;)^IpV73h>tZ#e5E<!spg2^HAmoGaibp7nj?n&2xC&*
znsgN6r8-&@#-wxoj5gxo=7{)GPngXyr8#2n=7{r~BkpRBc-fCI`X!8hX5^Cg<Cqwy
z@-5T_T3Qd@t6qb4w!pMA86BQLQsqgedq4hC_ha*!*w9TaidUj1kpo}z+rCJq-r&x1
zeD{r6hv$m${85b<G7l267+U}tH6(uSql#IJv3TEDjTy4?ZNlSytFIF7*!d3Q9LvhL
zm`gBEVP8qETayR5!G44ac!)Bgg$Nb>(B9?K@w-~z1<1f}!8fpt4yn@j5Lfv=92I1d
zRB>Kt%Ce`2;-?NYXPN3{c@4aB_(7a{L3jxuML;`duY40DvJFPGl{@*PI^|COu0%O4
zza!!BUQ#^Lp;po?B5dL=J;MAR4eqK(k^A=$n^95ESms~4ik;?cErCL>><LzT-)cPP
z{pL&D|E-3&f0J~)+rM_c^aGZh42q$ujA~CY;%PW&8GeMm3<5*dH4r1~7E?R;i4Vr$
zUH|n+R`Rr7`5{<m_`k(I6UFygv^TD0+d=bR58hXu27e*jEKYR%h!UTnL}SN~MR-`&
zMv=--Bvd*?mPT8qV(`2P!kjm{uZchSwxu1YKlM@7bND@zUP^9J^X99mC}{ldSBu(k
zxKU|ee*qTetsH2}W}oXsaG>Sm**&`;9jfht5HAt2H)4g#`_y(v6z<ES*K}W2Dm1bI
zP-9Gz^iX9Jp-o=I!dPJgD*G|dN8AHpi$vazuk9W}V|klvyL|K7F5S3@^Ok&<HAa5|
z3TH>2W$A8)gGq`pvNn8stG$t*AwSx^IXo0EwpM<Q2>hHw<rm^-E6<5vO!ngr!eD}L
zTBDteOrvX2yrC*xZ{pv3b#COBNb+WWruipt7|3Ql)H_6sU63%z&gf=Ag5CsZx*l{#
z<C=m=CA7ArcRqp<z9<Ij7nR<UgYgYZj;vjB#P9<Cd1^HB0^HVwU34b&9cb>RhbBBt
z2I@6Q^cD(sAtV-sq<}~Ff}l{9uD^U`z?QN}u|;hHC~y2<SKuZ(S9y_IC2Tnnqh9|+
zHfI;qRGa%$RvccD-iK?MjOGZ~g;|5@ZUm|~>Ml#~y+wDrzU~b8OK%4JrMC&#r8fgu
zCfXIYN%|G_4^<f`{Tg)Tr69szax>Lmj5A;s+4rLG^#iPd2f>8(caZcjlfFG}(o;-&
zcHE>bOgbJ@ngPTSO0ysq-1-IaKF}dlrRy(<P2e=6Jp;jln4#Wo+^re(7sK4pLYd2}
zh=vuiuLg6}S1&dnZT&VbiNhrs&Tt+ltPW5LPwE&aWrz&lk__orVWm^u7hq;muoDbB
znN!`5GHeXHgHzo<hzXaD;5fP6f$cj{gBWijRg5+$7a?yK@{?q)p-^}b+dMOe<?scD
zQx{494@t#VdHIKn3}?P=7#Wj)8&YaF;EYs(%~M|CQA)*WuTd%jrKCf!4l6ISVsPw<
z8FF*lEroq%yVcBB$xE+m!E^T|0BglhYL3zjCF2cln9DEsx(l||vF4xB^cdsR)un&*
z2*X)J2MYADhmR5?7ecR5mQtchw|I^@4`f1~q=tTJla5Y#3VA1vmij8jihCNESh2f;
z!oefG2i4HBLV6fH1~A40_KvX^XOA}cU~!K%UO%wK>+JQX3*3u}8*inRo6#;X*q%#@
zCAK=FkYkQ+Urg1Ec*LWbI3vG7ROPpfS3`e8+cgTw;pZ!SmFh>V`WeMP0*xQGe8Zym
z4n`|;yR|v5cMGs_#x18mV~D(d$Pfknj3F|~Y$jDc0>6-&x&=2=O1t36V62>_yWoN}
zGil<NwzklSD`^C-P-~ph>e?h$u`;G8H-(o7xWvIt$~|a2o^Uf7uM7xVAl(Sy`MRjW
z;Heg~@5n@w^n^Ngwtz1awUf;^%%q}jDi$_S-r-=sRWvlPShlCPz7`!B1?|~1-Xn&0
zEVv7i-O3I}{AtP{(mR_SRK7KI7Ifz`5zcX_A=Cf60Ai1s&TgweXUc^ft~bZkkAFf5
zG+szLgo(n=8I>nk)K9Xg!%k@~T2Kl*O0OV{cQ*&%l<0qh<gdxe5YEi@BtKr&WaId0
zKRy~obMb12q4M!6mc5KC#H*c#lBcB^{1Ko30Y8+w3)gewH{!AlOMlju{XBx$I=zA|
zDw>N`UImw3`bYD+-^3Rh&t^uu^-_~i8bEeaO)M|-n?T2^qrMv4GyN#ym!SN*ug#zw
z*f+8xXoI|FdJlk%?h92MeF{kq=Z?ODB*$@_MvCMlFHR^v>gA2;UwL_B`cGb7914l#
zB`=19H7hM{T%SvlxN&_MN#f!-M5G{j@%hCwUS8aa;^j@~*Sx$qED;&o15Exj(lalm
z-aB6o<)QHP(p7lE{9lv;uB|Qo4nBrx-d8!;8j|ZaGabJ?3b~!q{~--`U}C6=46e@V
zW5D+m8dRu+=fY(ES`4jnv0OIWRr)<*HoKj<f=`zIfT+?R;fxWWY;dZ7LWCg3vXwuB
zo>BXhg+FIU;RyhEdIp}94}T}&7iaZ*0pAs<pBqp8(qE|aU#T<M07|d=I&~&h`wxQc
zmen6@&~<z)jII`oT)?7dut>!!e@6y!(zUyYyF44H_m-vm52F7Q&KP-tPOtheL<m*;
zG!YjUhxMHkQk84~qi0kl6&EdYm90Q;t$l{bXb#+hoq)p99I)q*93uc^(5vD}G$~X<
zKLkZ9EeOx3-Axe(Y*%N6@#-v>^P5~gXo#jJLqHoN7{t-5;zx;-Le=h}2-M`niicdl
zqGyVSlqsHC1lWm66mBL``z+!AokAi2B+)a4L<;lr*Md^QCjQPVC4xa7JyS}gYIq>o
zfl?wDu;`gmB2`yPSRqI;MQisF|KBMl0zec!Q%t1rtrPc{ZDaZzWgJ}Bx4Oq|M#0FH
z56D75mK@Y<3Fo1bV?=~ddet~0gsR~o%=EY?Ce-7|1~7W2ut+6LkIU(2SltQ8m{I!z
z@psgYpp(?uK}3kAXY3$VyPtA6a!kw)vH^^qv4fPcBcIbR!w$J9I+N+l=sz)pDbCzE
zZtcU$Ysc*yx1NXymFOA!NY%bXITN>!YyhKY>?39DE97+Vuvbs~rSQ%;evKrIDOA<)
zQfnt$MMNk<&sasO_5kHf+$ypGjGnQIl(DKOrx*EF)gC1N&T4&0_97xeG`(tyy@*r|
zFVl9!4zdA^p0R_JwId(w5LeRDmA*<LJ8I0hO^t|<PtQ~esoF!7Gx16x8^GupV@Mfe
zdUNu+z;+ot3GTQZ%|n7z3K1cio~aa4wTCHZ;&zY?VDyX~q^uozJe`@!c!c0PwK9kZ
zx%5nBkg8!-zavJF4Pf+)5u}U}eK~nsV=Ln^;_s*(<5mU{A)2143{thPQO?9GgKPk!
zXY3$l?Z63jTN#fNd`FEKw`UL$a_O1MAXWQ1<xJcNvH^^qF@lsaqCY1u%WP$QgZMjY
z$GDY2M2MzmDuYz*o0KzgJIDqwdd3b?){eXzx0UfNg72si<5mU{A(x)13{o{bw(p1$
zWCIvIV+1K<L=ihZ{F=np#*-AVqlS!I8$^U`dZso=)xJ$R6R!=j0gRq8gp_AU9@i_F
zf$BR%-%%^ZtqvkWFg;Tpq-x)#oQYdOHh|GHR*<q*;P=ahgSq^B6tGhbAtGecGlr0=
zeV=kBZV1@`M$Z^R${Lc+nFB#)N&Eu}*r|pP5whtSLrB%0qMV5vLN<WWGlr1z49T10
zOU96=DPX4>LPW@>XAB`#`yu5_+z_$>jGi%slxIjmuM3*ik0@ZL8bU<Kre_QxReOeV
zCT<AX07lOkLdr9wyMAf)V+z=*h7b|5=@~;v)qX-b6E}ox0HbFNA>|p;Q@<?vDFy6Q
zLx>33^o${-YR^*6#0?=Ez~~u6NO^|z)=%j_qkw}4uw$h32DG@k&Ahseq2gqJJ17@y
z2h}~&o1LLnK7kMsvguXZ_yj^K*wRYi?R-0;Rqf{#z08O{zftt~dw+l7vuy`ukQFlM
zRb9#;Rr>`2C%)gejoWAB1tLAO<w2_U91&UkS3tkOhVj+=8`b+O!N>+MdZzeEnc~+s
zvRiXQuF@%`@Jou=sV#|!kWSCEBvQ34lr!;`L^goYGp3NjR@2{MXD+92qcvu<eVzh#
zsv$&#Y<k8JQneQ-XX1vC4Pf+)A*4J*@_KV%$cq%PQw<>^WYaT-kgENPawcvF*#Jh*
z7(&W3q@eE#4EZ$$>{LUD2-)<EA*5<AQO?8-AsfKx8AC{UhIH4jNd6xM>{LUD2-)<E
zA*5<AQ_jQ<AsfKx8AC{UhV<00NPa^BJJk>(LN+~P2&vj{DQDt_kPTq;j3J~vLwd~_
zZ`0Xdp@5xg2oWKho-u?}?Y}8!;)ak7VDyY3q&!1#K@9h?jUoR-0Xx+YB0@GjV+g6*
ztCTZwL&yd&dd3h^o+16_{Ja>F&v<7Y6BwB@T|*}(arm>#9LY_o+W%7iTiY2t7S>Jf
zg&@}KbIYa{5uqAA^RP&&_B+a%xSeDJ7(HVrDQhRLAK(oH_IdIDC}3w9A}=0@2-);Z
zg^{YgMmZBVglqt#XAB|b8<KZZ)fPn9#`k-WJJ%K>LOeZV3#r;4C}-lfkPTq;j4h;m
zTMDoxga~WPA3^S1TZjnp^o%W}YJZ}fiQ7UpfYCFykn(NmhAm-4SX=%Ka_8DYM2M$n
zY#~*{f_6u2AsfKx8CyvCw)DW32qLU4Sdi{yTZjnp^o%W}YOhny#OsA@0HbGYA?4fB
z3tOUyu(n`@y_0PrBE-`(wveh}al0e7kPTq;j4h;mTl!#&g9vNOKS1u>Hbz8<r)O*-
zRr@F9OuSym1~7WY7E-<~{jep52y4r~Ko0Iz_cFNd(J^>jtUpsww{Zt8lO^1MlpG@r
zWYVj4@u`kfZ7abiZUET;M$Z^P$~U05G6@1QY1_VnuSM*souyw<O4YVeG+v~C9&760
z>F+I1kzkm#r$`6@CFq$`B&2G1*p~PI4>!QR)k7t@fJM(3M9NLeli0u$+n!Kzl4Qov
zi5QeUvkJ<7_R?S$o<9FQvj_lH=ozy})o?Ck2h1WDu;>}HNO@*$3(UF(^QLE3aa^--
z4CUW5ivUoCo-vCQPoV68S>ys1J!2Lr->fJ6+WI2f8P09|dzupf(&!n@N!4(+Vh1!Q
z7qI9V%}IHhzxd*dww+-~wh?PiEHTquaN?xf(rf>`Z5s|5b~S!qRKp@`NB4Qi3SH=#
zeI8OZoDSLHeID`xk)GM-AyvZ?+Ke$*OsGqe4Pf+4QIWD^jD8AG^&34{G{2nzKNuP7
zSKvWx-ANN7LOeY);FGH1t^baUmt+GNJ!1<g923SI#*H5NU>N4%$PC`w>|{fT2-)<E
zA*5>9P23Sf$ObTa#t>4TAr0>busgYv4Iv_A(=&#Us$sixM+_kwz~~u6NO^`7blr{>
z_C$BGAw-01dd3h^HEgx+h#_PH7(HVMDbJAZ`ls;&F+FB*gH7Ae{#cHy8n#H^j$y&`
zX?>pwV(a=05upn`V;HF#mLEG}7})?u&lpC^8s@g;H|E?{w=G-BqTAS&5|%YP*&rf9
z2YSXJQZ=k@cEljE0gRq8h*X_Hc^Z_fHwd=vWP^wZ9q1W@NY!$bGx1d**#Jh*7(}Yh
zpaKob*Bg|lpq;wEKt$+3&lp6iR-l}T8$>pM(K7~-sxzpY1{LZIQmC+v8T@pl+nTMw
z`sCJ#Ox7R&=eBLNZYr^ChhD*u6^hU^Q!}Yr4*_@Z6%2WSNY6~oq-woHWI0W2Y9<@N
z=$UdNWy?uF+c-6cDhFYb)9z$U*y}*y$i4*RL$fkI?9H^-`l!ZwQ&KO0ef;-iZ~3r;
zC-r0r^`9IgAQYrmMI9!Eio5N_g%y+}HuL%^aZe-hca0L?@(D!5p!kwwM1dH3RTM!|
zsCc#lxsXw$3|s$yZ<I0q<A?xbE=Z1%6~OdN{gaBBms)Onren)_7{3R09G|Sfr)Tg<
zS$wr6Is@NiV}^K+KcR90&V)iBo)0=^DYg0}d`y9)5B4hcPHcjvX9nMiBU)wWD|Hln
z4Ig_83eOd&V!2mCy);j$Nr*ogVecQ()jJUPPW)l1EBX0N)5(~jmO-W}?$<qn@=Yd-
z`<YvH@qJZRM^^Jo8r+|>zz})8!4L&~p&`2U&4%dFUok|le$Ehm`k#jA*Ynm04lXe|
z!BR<mv!zn{+m=e}8M~W&t@<=ewdv1Ws$KuZQXP8Q9wwiwH(IJw-(;zb{;s9Ebat)D
zhYO7?mDM#%<@5uV!Y%QZD(L*4hND{_XsI6kK}+@OZ(FKQNA@!L`t=M;74;F88qil+
zYO;RDQd9K6-iBkUKFU(l^fi{6t{=A446XJt`DSX|v(M5mmh=&p+C^Vusag7dOO^Fc
zEHzsv_ca`Yde~BP^a+-lt8cW_JpF*B=IgDNTA<hLXLuLt(=4?}UvH^h_2(_MoBpk(
z7VG}~4abn)XsIRoDoZWZ4_RuN{+*?k>uCoVjum=?rB>>9TWXbl*iys#HA}75y$2eO
zHF|$b?XEAj)E@c{ORd!}TWU|8Kge+GrT4bf-ue<t?V}&E)V}&PL#1$O;K3>uza@9=
zWb_Mu%bG3D{wR(;W--jkMTArBC4=05;1`0eP8>0~oUnx9BI(^j*o`@fsXxRg`y12o
znEyfHW+xNHEwNE_YkY&3P+4rCEoYw_ITR9-;->1aB1x2oa7Y}z9-q%SakHn3fkW=U
z80__<4nqbgZuUtffR`l+|E7$=ui`N_(fAk}raePfa>U4HqS=g-&BU^qc!Thv>yYZp
zH{x+ONo6uL@Gh0)O&o)#!zRqi(YWkxHts$#J&u86Bd$jtwiz1saZCo>^^u8{i#9{U
zjtDb2xMpP|)T=jZ>G9j-0lmqx8q^zi$%BtOgRjt1!S-D$SY@YzcSEVVRW=bZc+)dW
z9#XX_l=Fs5o<?aUY{c5r6l4P!Ju{V)3dw_MBIgyaU0+Y7h;deLjo=e8g@}+&&zM50
zHjQ#7ZVK4|M$ec+%9@hLuXIRDv8GI?h@E8$b_SATM1*vD=8YYx+6>B>xG7`<7(HVO
zDQijr3oSgtW3ON)!FQ?=M1)*=#t2fi66H+X2(kf;o-u-yHKN-;OTP=jcd8LYgj{;Y
z2vW6KlrwQ7$ObTa#t2f@h#vn8dYRxm)d(U&E<IxesoHGHnYa;T0~kGH1SxAouXlEv
zcN*c2Bn)iWWpgS^F+^bIz;L(pw7+lLhDm~V@`UiS8T*`QzB>-7534&@w6tSbmOFwD
z!eVX(=MTH&@0(n=<Y&NN@+U_y%HaA!J$oIppwA~~<kIzneRSwa4)#%*Y+5myRM3}`
z#n}~fs$`-HL6Hi&L=b~DW>bv3acsyV@9i35<n32oj6Q|>Fd`vulO(LqU?e(1Qd0D}
zK_0%P88?sMh+Uj>X^8COV(q$grkN(9jT0bl6GrdAulS*@CQE2z`29M3u8#VcWxw~{
zL%lG~l=Ym_aafa&aXV*L825W)ij{x%ib_0gMJ%~KAP*)vf<}}aJtT<5M2}dshUDns
zLhg!MAKgf@gw+6UI{KQ0+9b)se*{T$9p;fFv!ht?`wX~29Xg%m=`?BdXeLe?J;r#)
z8t*vc9ZxSiif0V`(#hzF^b9Z_GsuKT1uy0llG)Ky=}k50uRSt)8iQ8VEg@O5jGoT8
zkwF@DhG9CBo&knpggKj@<@=INIw#0gA!(&3HF|DcZts^Ujh&Bsb{g~xm@zwgq46%F
zXA&+Z834YcG5AiC{}SVk8n0%&OX-cwp*3SB=3U0S%y^d@?+W8xX}qh9cQrjzDDM_h
zVBQmu?<HxALGHiC+LBl0<8GJ_G3mNabo=w@n4gM4KaZ>TquZ=v9&@YPqhKkH%1vv@
zfhQ0c0IDh;Br&Pt(&DsYhtTPPKQQ%UbiM>fB3r|`jTm#H`Azu0w=}}1%}85xWG)QG
zof;uGiivw30(d0ta(Synro-*P8ZKICWdnVV(Y%4eMn}Bpn1OH{<HzF0k0*?ukgJ6Z
zofLWsR2m+cPq`@-j^>Ztm`O+I<u_$o+hkv7Esp=lV=Z2*swEhOZo^+Y#vWcB`9A!8
z9e=4XuCn+QoDePsNq28@Te~;)_g5Cs28lXzic(JvBc8;gt2V)1w;ImyaAjdbCZw56
z$SvuTvnkVk9uf#I({@M$!y66Kn`QEmko&EX#>q7FYRFpM55;>n_4Za4`3B{oK~q!#
zx$+ymTtoK?cgjuoBEEMMf4r-*tKqki`Au#bESoC3HAZj5&u;)ezp*X>d0TstP(T8H
zibyzy_VX016Co;kEv^k!)Mjd}u&F=q>2IU9izsaDv3b}G+k$4;<~75iXVFCT#h5ct
zr0Z7a@*|6(dj>b&$uB~=?WU2O>9!UVo6f8Z(J*4Q2UzVs)-}Ki;Zhis5E$5eY<;r%
z%%d}~2F^9RSI{_<YUn60zu)9~Hj$L(Hn6&~)D$C{DXRjt(_;)C!qjC1y*VQ^VTR+_
z1oMLY!Z5;P!v=ZiIdl`z_swA-pBen-uB1;46ACSPnXe=>eZp(*W76CeGpXiG!(MZL
zvrIk`atp|tB8`)&EESasDk|kw6zVS-L?`Q_6G3#ME;=4W$LpeFL3FGx+6kf^FM1aC
z=5XpNgwi+>e_WJl{B_}v{}_*XoA;9|jQ<VsKSm<<+EfR|tor;b5XPggI;tuD7l@mM
z#Z(mYKz;siBmQ8-_cp~pjQ9%>zpyEubHI&=-?u6LUc`R^@y9pC---AiBL3pK_?~$&
z_1}me=6s~W;gRKNEm%91R=~%-Ki!p;Y(BAUHXLf6(s(y87CBowrI@)z67x&hsjLED
zx-<M#KMGH7k0}i!X7naZi=E-z=!eCRkKQbPZ8g(ALOP<aKxZFWgNS#bbXxdBP&q6B
zvAS@0In-cMW-;v9@IE8inMue+9GTdbscsZ*pVY7D<5lkrIqZ-`BJAXkRkV~?r=4o%
z68SAV&`I^klZHmB`uQ(Z3VpbR<?}<7&+4}*AGw<~E3Qn-l|7*U+bK5wzD0eptp#6c
zPdI7Z&o{Cch*tcN(%wYd(kZQ9IQ+)X%Rl3leaMCO>de4|j*L<QlF=&xyt<5RNzJgo
zrWIj1U}>ycQ1L8>mFv86xL74G^XQ7&<!0|$C8=(|J1C#8J?@oHTs?sDStI2WdjILk
zuycfIMQA<Jiqa}>TTy)cQp&cLr^gfFBhbVWH=0J4xG`8cnP$ePtAv9GDq8h4Oq4D!
zCi*=-7AftEf~f4r((>A+WbxbOc%@+4LSAh+$FsXbz3T&kt#^Ie*qT9GxB|BBPFqLz
zhmfQb3b#etB2#dY>F#juUsE}NvYk+5V_RgCmv;4dX;J2|%t|#dhwIbs=Zxe7R}K{X
z6n}Dszk|3H`s@LHiivAGQJeT_1Sz=UoZ<z+8u49Ba&jhRp;=xYD9zNQ<RxX`Wnf8S
zwl1w;xT?j22JS<8T}rn}Ikt%Z>Y{s0bWxDRsY~oNlHLoX;t|C;bt!!&<x!?AEtcz2
z`b`RZVeyz|z%eef(T>*~vM)vq^jQ4EqoTTS(VTg67S3BZe+grv@;o&g1v#~*)Xnf;
znhN@m^Y!WHoQfs0QkU$BHRU?Q9d?M?A7fJo;->C(*ghy*briyJObAogoK-o2nei`#
z5<UE*n^*8xkksF&FH~6gQ~GuI!_cDeNQl#LN_`Z6e6A-R23Yd3zQiZ({c&EwG$CQ)
zV2D<2_~R0tVUD!Nv>e{zsFUF))uk<GfWAUve%bOh(0>uPFZ4B}_D0WuJ1p+u;+`t*
zh`5hAO#P9#uflcIlo&A&h@H{WrcO#8mTXg_a2<7f@^Hi?Q@;m&UFzJFqrRLvyron9
zCjG6nqYiAPdycr*v>x7)Q@7xe!cotF?y>Z5TdCVN#5k(Ajqc1g#+=l)zRgh=AttGA
zY@-fe6#601N%bvpe<p5MJ5$T;%=s12N%f?}ydp8N4yG>Xpe9Fj5dY^wzasSiiQDOt
z_k5SU55R3x&$+bmHE}ySN%zCOTg^vDNvd_7XS7UJ=L-Ek(2n{-=ix1LZOq9T;yf?z
zHn?pn-*p(K%;UNkf1bFvi~A#SpBMMH;&x49o<4EM#Jx@22gUuDxJ$BvBkqIZ{z}|G
z!);U3bCh*pj(N@$w<hlG;(kutuZf$=GtVS(2gO|`?(X7VB<^+M{#4u-#J#XUt~<kY
zKLxr|Jzrqi{&#`({(GT2x>?Q#iu+-4FX?5>mEztc?hlHLX&azB6K+;j2aX!Zs`rcg
zS-73*{(*0$v+8lsj(TbGvy&Z_o<eu(l)@B8l|Z+tl~Y(d`-r<y+-t>sP~1nweQFBZ
z=Rc;feI}<;Vs`4esW!FmRJP$GrV{OBanFI<rf!>h<y1#Kjy#U~8C>=*)5kc1w4kp}
z#_z2~g?<+<3mleE9DS3aeI$hYo6%o8WbY`dQfffbj+L}F@Dt?}3AN+5FIxa#K`5az
zaEbB`Nz20}%9YR{s(SJ32@G)ziDE`rASky;&KbBpoS2&tYE^S^Z#F}pk<e1CK5qxl
zmk{DgbcINGMEI6rwqnk&NzRpOorJz4q21L6k@sVfx34-z_?{QO1JtpS^JNJgq)w91
zA0)I1Z=i|!cL^O0I~j_!u*^<Zr%K3`&^fsGoM}@ebRJR}DoN-9b%vD70)!Iked<h+
zzD&|Sgis2lgvAg>&70H(DvZ!-jKNWLiw&JEp<C5Ol6IqnZbP~9--#G*qZoUu3TK|w
zT?o1A6E^hOj29y2t_9{~8bbziv${lGj?iP0c89uDLenQR=j4`4F~Yqcy~9yAihHxT
zpAh#`;@%_f=ip}5f3>)9Uuv0zy4?^y4P2iLlh@?G6SS-D4ij@;gz>wIyG-0wbe%mT
z*Q*U<2S#pyyFuKe#XS-3`mqY~%vbM>d>!s(ktgBa8u=-3z8v{2+=s+{OwgVb`n%%(
zKw^F(^t0mrLfjX{{f(r)D(>$k=C9DfQU4S-5~ZGLacLuZTl9ZWuhXM{ggYqiuHx<;
z{VQS)68GrnKR{Qa+u*)48b*h>T-^6Xe~Xw80<A?ofSmKyuFi1Fe076Ug?k&^7WIAS
zQn=4Km&1M0A<pa0)u6XIru06DoQq;NA!d1uscXeOI(92!4DU&Zanv0#YWo>+zW{f`
z*aL7~^@G^AF=nVZQ={=;gH8#Z6SqJ9GGe9)JwN_C(2L`LfV(XI7r1NUTj848G&%Q^
zoQK9)Vn>U6inu1GBJ?}OeXqDTh{TTz*F6&Rh|o_<{IBDz$3MrN5Ohnl!p$UzJUu~e
z7Yn^s=>5c9pJ4tY#XVZwW5qpQT%+fS3EFtJxK-hLucUrR+}jhAAmtuG{*t(li~9p{
zpGy>wYV3MhV*Vg*y^Y}{HOz=RfF&|!?<Bbv(Y5V)MRIaz!`R|D-8Dk*Dehmwj5#nu
zcZ0Y`i+cc4=c_Z4djV%^iuen}U7ETPF>AzaOTRCQImdT1E#K@o%*m*0GyjTZTE3GR
zj5})Y!UtjdK>7wC99;NV0x@WHS@riqB$-vwZo0W{{Emp4BJN=KOwdC@@7}!x^kLom
z!97l5&Xkx7CFWfcbB)A&tos<``Lx8`FZ82Ae^=;dg?>rs*M$COw?_VW59N0Ckas}n
z**%OO5_%7bUnlfY5`UV|=S%#U(AP-(%|hQH@%IV+ki<VB^fMCwg3zxD{kqVRUdrw0
zr4GG9mxNv<^svzT3%yb3lY~B3==b(s1+I_x-U9dTUY63ACH`^A^8=xOA@pyA{-e;_
zgiiHQZmy4VrwTn+=w(9hCG;UeA1m~kLSH2G<$Wxl>x8~l;{QYFF9`jJ(BBdIr$YZ)
z=>HS?A413aDL2zk9g0Gig<dT5?){%Z{6Rt=+0T}6s?Z}sUn=zbg#NJ5pA`B(h5l+k
zOXFMpER7#Y%=3c$KSKXi=x~wJ+l!RmBlJw67Ye;f=>3E~T<8;pt_WQf`f8zX5c=aq
zDgUCBzr;LV{4XFsTl@jsmn8Kyard4~iHA<6^y7p+OX!Oyvpla5`g);n6Z$Tp?-%+}
zp}z}y-2ms>tMXrNX~n3!Q9?JVS6liJ>cDKNFmu0#hwHfdx($Uxi|}+dHpQf+Lc@5*
zdCrE)p|#j*xOp1WK9E1R?Q+$r?vT(;YH{dbgwCBVX=-g~qsl1!em!%lLlK&!?wV~v
zXCRbQ*Ki?(w2KfbsAuMz&@~A4sIG-3^f83`)OT&@9!MyvCw4Pw4~C9a1M0pZhHg^d
zLE1ER#S)YDOYlusL(5I*cL>c?&*HT$<-Ly3F6zdWCKL{D#7`#=44cp-ga%c7jS0;}
zXs)^fTM6V_iV)^7J{Tgj4?+voOA@*XyN3tk*9PueYtqgRpN;$Z&p*(FE)HLaTdQBN
zp)v3+SF_ifv=4!Ar8?>m2}ybW|MuQJu<7H<7oU+VOTw0nWWac1iU>(#5`%1GgCQiT
zF)t_B#+JcQ2u8Mrts+~FBm)kF*o3B`P72&YAZgk(-6T!6?Ka(Rx9=wDHt93lrrTHU
z_L1I}-L%_m`pD+hCinOGocVsGuYq*CzkC0@7>{PooS8Xu=FFKhXJ+JU)I&W?nGw52
zJtC<S>J#o;a31wbEA<8UyO5f>jhJ_;uOP2keb7q%lce|;3z+v~Nu9A$zmn7#PBfYK
zlBA}r)E^~v%1Zf)Sm(V~YL=uPwo>yY^+`z?I-AuOBy~a^D|!m$UfIbOPN@5lTCJYz
zH|>3*=*O^hClZn;y<Mx$;8@V^?OOH0X{m>%r5?$rym~Fp_*rgJ-Qx+U_3EROCUw80
z<{mbwM<n$xQf^XJg`O*3ug+SjCZt-`3s!0!QrD?nM_BGw-xoXq-KHi?3Nt5!l==5$
z;7R0dvQwV#da4|$UwR^r)C-<VwG1<`pY*)!xk7j4%LR+;bWHvBodn#eE-7B7yVZ|w
zHL1nLSL)3whht6VH5Iq&E$R!BI-#yc-d0s~o5@>W+@ZIrQ7g5nc&px_B2y-BTXDaR
zt7q>psU$EH>RE1DQ0M;QVLhaF9XF}N#TlJcSZpQl{^Ga64>M||K8e(@+5q1QMpH&?
zL{;C#lo|ICwMkND97dFnt`v+)u{WSb)abo}smdgE$%jm8k#|ausI^u(j>@R|dy@xV
z->Wm~Ym&NCrM&m+tZMpeQ|CRNdv#9z_QNK%*L$xXQ{Q^Xqz-!@)_c`sA2F%p-jC~j
z>c~f}a^BDA8`W1n#+2#9L3R9ZnKFGisLn_V^T<1_52};TGVg?X#{19uCguC3Nj>NN
z2~rz=&D5RhWnkW{{{G)3PxvyS9+Q-*b3!fn4fE_&_q5cvrlpFWcVgC0ORbugD*X>)
z-l?)PHo7KMt)xz<TW7>vlj^Y-P2RB?yIdkHYC@feJUC;}#gh;mS0VN2jGXHZ_3VEd
z%x}#YcfCicmrd#iGbUXp7!}O3z&xpbBY7uOMajEer_{k$m}@wAw|ZqOQ>K4+D<!(;
zR@Ge=z~1jxlae*(ZuK53Z$k2dZ+DiPV^ZqFlGiGuY1i2~Ew#<0RA1$D#doVCR_d0@
zzxLmQ3bk5aLcd%aLbvKfSfsiUdek<A#cEf{%$Z)5DB)k&+Jn%g?m_5Q_aQ7&4+2N4
zk05lZPe}Zm5<Vr6?+WG*1@hy3=u*%AUx{PSB&|G$(5;?FSfu`tui4K1zth&6(QLQ!
zC!yhgOY81Za>Ikrt-J_r9GenyGAKCZlKU1%7!kOEutzSdN0)~fuS2NSo5e4cvR5E<
zt9q%^<~dt5oLMIDD<!-}!WM)sW#StI(pJh*?n3BRJr;yGhR+)SFH+Yd#4UX3Z=2LG
zDENdI<>9O+E%1F(4{OkPYDoC40yj0hTXIckr11`cID2|RAm@kVm{#vc=)w-0egCjP
z3@1M#@lQ(l8NqqQ0fAwMvc(8p%7@UcN)Q&QAVT=Z5MrN)5MDEcE`e(`N8(io-D*LA
z{e7$8ES9i<=~j&bS&7h;wIOd4_&R}aK<HN2A}mrH5qcEmXZk2}PT@9P<tG$v(a%cw
zxP)Ivc&~n1;(iHBVWED&^^AIN;C@%BdLZz3u374nfiDB{XyB`ee>3ou>sRX8Kmh)@
z2LfkZmmv3LSB-jEaApSm?i%$4PuP8lU_PTNf&u-Eni;HdKcf}|o7@d3wa&fDs`I^p
zt$;TQ&Q-ykh_4IwyDK$YDHVDa=$j<>y@B^2_q~CW65fsQ*5FrNmFm9Wr`-$mM}uD!
z_*dL@!2g!SpGN$n!B^dDq!$~d#f?JM3jJI#SoDl~9xZlD?heV_A-MwrNeLt+kZz%*
zTR79LUI|VW<&-Y_9Kso8{q6w?4@#*cQtF75x?LbA1#(g#ow};*Dc3gLSQgNopdkS3
zdjR@(67?U$glBDW%`r;q@0Hc*r2Z+w8}#qXKJK|e`jynL0Wz-H>!hAFle}FZ;i8#4
z-IG%G9-;Ogp>{yx16I6k=2tz>sLeB<@*LH@GiMZ^(5}$ii`NKFr4@FEep_6r5}|<V
z)O$j8x>6kpy$r~i&>ILJlJFZLxA$?hHN#t}ejb|X?Ub@#7f7dmDOBO@)b8*b#hrR~
z_$}V20lx&0>hKbTE#XG*&-HKgmELA4)vR`gS0g?dZuS07zY^^5zN$}$?*)GzMyOrn
zOtX3{yxH3-_;Cq4^)rBU>R*Isdbe4SKLGz#{YJRo-Kl4mv-PU-faX|dQ2(XnReFu^
z;e=XNKJJA@Ct(}HPTf;}2=z>ck9hsA-{^OHL#`VzapQ{IxL@rn|DyL9b)fuf2yZEW
zO2U8keiZHAt3Qf5OMM?z_m$7`-46(P@<KU1H^sBAMtJe8HNHiz`dR(%MXpr{E7kg0
z;F#WounxT=pAXEs)>r2`GV5Ml=Q=6jmuGeQT9Mo1YX&{N$St0|+ZPweHb7FoB;w@K
zrL(iXPF;)e2I0dEYSrvFif>Tu67G<2M8ex=--voz!jryn)bK9fq_m!tQc3kFaFXg<
z68=KMiaE!9NwsJW;oIh%M*OZhA3(@@lIjO@9`N0VdOm_smwm$buxnPuXMCM%S;eD5
z+mk+y`#<@{rT$8_red@A1{JS(*7vyZ_UmZ9PJi8HAivT73ixmI^S-aUautw&b*94Y
ze_Ak~2HcOhE-Ul@-1Vc1IsOys`HCw4uUs!x9Ku)>&Ar6`JJ)3R3jeEu|0?k7{C@Yf
zb36Q<dfVL1{!+!!oKypI1Iq8-12{R^=RYd6b?PH?lZd~6?kK{K&wZnql<z|;kIfy&
z7=3;2gnyBnBUR`AJ#yituY98zwpr!4H>nm>9`dem-&Oe$|IamBX$9snPpAG=<tJbt
zQGfouXn?;L4RDXl@uTiP&3|^rQTL;Pf17cidv4@+h_8seGUF5O2P3-VargHlB_&@_
z4@PPc{w#7;$yY#m8{q#M*;?`~fqzTjkGuZ>%<m!hJ;;4Ma=PTllKW%H{iT%pjX-`Q
zkQW8=CxQG)AV=NB3tlQI(gSmgOCNU!7o09B)oiy^v)x&MH<VThq)H%{2&6_JH3De>
z<ejCf1hPsXYXB+rZ4}5xfph~>T)IQ=!`!(`S1fqCbU<<kBsV2B<OGrv$U#7YfgPex
zcIX8QS^@*=s^D&f)Vj~eSUltY{es&A&$wS-@Lmb;mJkqCbn$%wzv8O#b6~zv{400e
z#UBn-$ygthFel;d621zYL*Bbo$HiX__=`TRzZ1Ai?YQ`d2!}5IUlKCD_u}Uf9zjUi
zcm?shFD?q+r5?CAgz#e*zXjnA;8&uC8K~{ai?;ys(~EZoD~o=6aUxh(<X)Hzt|$sE
zJn6a*?bhjLVAkooAeo1}l|{`96T#M^j)jxKPQY(Nd~D%ygf{}7EP80+hl2|M`B?B_
zq4{C;$il}NUl>p~0RKn9Abd4&(c}E;G{SCm55leLK7>2egYY8lQXfIspdZyfRqG;7
zgNry#pvI?GxgJFLHrJ&tpIYO(9N`966yZi!1Hw(N6|N;}q54^H3H&wB1@G78sQ(x4
zDb(ODVz^Mk7771a!he+T7ZSQX#8F;`5eeTWVUdsZd~gQg_m^FSxK<I3dj$9#bu0Lk
z{>JsRtHRyj9&}H-Z*|}2{#*Bt-2d+Wy}PQYsVG*ozvxuahl(C6`gYL^MJ1lMcoup#
zcy9EZ^1R>kpyyMb?|I6KR~HWy@9-Y;e!%-7??=3kc>mG+BkxbW|L&dVTj;Czeb4uz
zugSl|f1Cd<|7ZN)_5a-el7DXC+CVDsNZ`wXMZwYF>ENe=-wb{i+|}^CxxnGZBE0`q
zRmF3)3nz(gz^;PDwP@k8g{NJgcm34$TbIjyjeC<DuU(7Q7Hup_6=jM(S%h<=qSuRx
zJdb%k<@Nafr+<D)b4j-3mXg0I`FzP&OMX=H%aT`1%1hr`+ETiubf9!!>50-0mi|rY
z7fQcg`h(JcEB!;M8xF*us0U}DY5g<x=nPPz&#JTd+%>>E6hDH`;9gZU0RpG}TZ~kZ
z1ELkK$D9Xy$9b@;U7K-1=-jfOhg~@xcD3ue2w@(yg1@SWb6%d{hSggjjq_pqM)11;
zzYEpH7|n~}7Yr->RXcbDXW<rz-0fS{mL3>OC9YO$64~V7$lCp*nM5|bq$Qn6EE!0p
zRLfAJe@|B;JC@2_07W&Aj>dBFT*Bb39T`lHBvfoP(Z4>E9vd~#tm+&~WX8MF`%L7z
z<j8<kmt?5x665>glHZcd^rw=eL|vE6wdNAT{9KpL469gjcr=x09T^?Vsn(YGz=m`-
zr><MA+TzI(L6Ev6X1cT{v0HT|M$;J(p6-v0#7DD3X^FRv>`p5nB~lV=&Sn$CeW`It
zw2tHwncay@Vx&K@DW1%rivHXh6&p$<a)QvEPN!P?(<91`WYwnDmhLrcV=Zbp+n>&)
zl6@*Ro+a%aeeXbNwRU6-^b2T74?3UTmt8_avr5R_5>JgKy2nSsxLkZN!BU2CxZTqp
zA5MS-VSjrXd|n;TCbMcue=eO-!UC(_mUJqGwvy?Q?2`3~kwhlhuQn#Lxm|Tu@hskU
z52%*(*a&!#6wG*Ld{@0%pU7>>q(@b2795LXoZB#-nPfbrT1j{!6YonUP|b#9jsum>
z3}jW;*vO`MCMUv?HN-N_daR_dw|QhF4e20J2B~`}lZd0d6tvrENsr{>V3Po2W0~FY
z{zNzMY)B4+F_;^oBnZmJG^j<QdEgzu9I>eYP4-AybgdsA&9^}@R<T4pC3&hPm57g+
zD6qQHV}nB@kb47h%7B4jU`7VwnE`gvLRw39gUeQOb1s=m=Ef~_OaNihnoN8ju5by|
z>a|FcNL2?US#r9Qxl{s|xBB-O2BIgNLRKkA0r;L(!y+teN3vs?ghV%G5~J}<LXjxb
z?zH|ZXX6SJ8#BS04;vCG%uO@boKw)mJ9z8NL{}%`OmyV|G9^V|A*=)F#&A5dNA0Bq
z_x9RVS`%7HMaof!TGJY9+1T9LwzkW{$?|h!Vk8EMOIV7+r~|t)3usYmG>BR=oE$+A
z-_PQ)<c$f{U8lP1)yA&)2xib4)v*Q|W)wmbOQmx?sw<s>io%SC=*QdI)W&ptKy4b!
zjHdBdQnw^B1DFsTll1U#0?LWK#BimD`_ik^`&EBmS}MS&6vU@pwmY#uN0i+D9BSr=
zw6ZbYmq@8pU&@-goQXtBL1(QV%jKXx`f`^1A+jb7t=T&ur1et#W!kSEOQr@kw+its
zL+lvTX4;H28d8IaT(21l#-NF%6sB`CX7}C%lpba;W;-B=i-Kv1kLDmgYE!a*Ps?};
zx+swW-NOmYc(5gw$Wfb*W!Ww2cBwIz7;FXNeq;{{ptTzu>c(G#B{u{D5zHnqB{?mx
z9UH(9hz^RU@@Y)kJ!7Ltc2k|Gu6S&0a4-ROI3}qn$w?{#4*`?U)+|Aka?^Si8Tr(j
zcrLy^lN{KROzcyGh$yIzgruN15*&lr*f6AYoZ1y#<E6?`m6f;}1`NcmOQupRCLL-S
z%Ru2^s!-`dYl^C*#%mrKkl{DWOO{p3%w+_tXTMsPO7GhkA5V|vHpNFU{#cj*QAlq{
zVjN;a>3wEefwQS`Qw_ucqio_BYv^cM;<y5?NgHg_NNlXnM5HM$K9JiiRIBRABy)+i
z`}@(N2nU7DRC}Q$xnPR4;4e{|wK$o{jbmnHM^o`};qkh33X-9WI<j@B<cMBZ%~>pH
zToSXYV>AKzg}SrR6okiKW`<2<UH@(if)TJ_W+~vBX0jkp`A8QQ2@#WZ$xJqf`a~X0
ziFH^QAi@@|tS82Fk#$D3f$12{1jf&*qX3ByB*(H4^N#+08DlfgvdXFNr>DrQ#I*di
znG9Cm?)2!!#NLEOF&R@QOLe{4l1^dPwX`i&8?g=O!V%zxcy=`wO|TQOf~r@As4!O8
z*^?Zg&LU?wB$9(e7)L2eBScZCO}96X4uG!qL}CCc!6Xb_F=GN4EaJ0Z7DGFnXD{Lq
zt1K5~gVq9JPrzy!v3R;Vo=T<dOpcFe1K2A4yG?Bv3=`ob#45ATT3l>RZ<{*S`U5?h
z0?Sqp$|v{><H>;5XX2wnSV3i_5}T@p%YFjdi9<|*RO`nur8`oIX*p0w$qZStCV`Po
zSZ0<%K|RXEWTvkk9;L0B%cRGp1<PErXj@`^)~``EF`MET0T=|(cmwPvv_BV^^lsEK
zhU93{sM4XnWNtV<s)j~kDM6h;jih0?f!Yz;Y#C#-!Tw38KC#(G<Jqju8fcSTayYR>
zBriRR)o*XIAL}1Xg613)RNoki?Tcqd)b4naiUbDhs2EqQ92RFh6CZBQWa8rm^sE}-
zG~7d5VJL}FN0KCobY-{zngu4mzGR0$?S4EX>Qm5<u-sJ^MzZ4Y@1tHo4QdZQRgU%v
z+aDgysR5YPIW7+am`T~hpi1W2(<;RUwVw;@5L?O)#dqhx1A9RowU*l5(El`a@wpi*
z?{M6xbRepcVU-yhQNywwG3!l=tEfzUtdXQ%;-eg(eR)=Lr*bY^v2u?lQ;AHTuWQD^
zw`9MASvklqm28rx{Gh_xoE}$MS`vMOYE*P=CW*n^-LVg+xubh&ln+^gwi|UzK`>f`
zYQGxCJ<lOp3}{yrQCA`r-)~IcLaWxW6Af8?VlftSDX$}gsAQxcD%!HWY3E}Bcci%3
zTWgd`kM^#;VJuF|6C0YnPze~AR!*FBRurg-CTJ#!slY7_Y<|`O5SBzXDfDELS#UyX
z%VG^p4r4KiXRwz;<@ucesKHL4JH2^y6#7gI_atn4RtF=FM*8{N5ocj+Tx910xnEk3
zdaN#^8?7S=yCX12Qt3g<a^j+C03d1{au2atlOCfD(FTJZ(~fpkA!@8EtVa1vGwo3g
z4FH($JxP#>b=H`QBwdVJVXN$p*e%Q#=@m9b!c6E{uCSw2o04JGuU1{%-`h(ZES)VW
zOz}Fkih5C&-mCk1duzpl*voa~JlqDgYMRMT{H5okEmy0Ywmh+xsaSk3EUpx^B)LTs
z#*SvuC1WZuh77281v@Fx4V5Frw}Tm0o-s8c0mJDLt15DW)rsQhhRM4R<<~+V2<ME9
zCo;ys%OwU10^FSzm87msLzloD0Gs==U`Hm&?zeLPPJ>it#hOG8nk{?vfu=RfT58v=
zUAnlXwt3y+hP7)O7Oz;hZt3EN<@L+ftzNNiY5nqbH>uuUF2$I^)OoEVMvYJ}Usd1K
zq%OGx7VJ=ZpmzVVTKrpHzZkn-qhh($ft{obWfpK<GLahCfGr)Qh?RkbsLG(M-3t<%
zGkA8h$}+&sD2`I))++hH7(4Q&r|N~X(`2|M#chTR3+E>{Z)RDK<;JNj$?prm+T#0@
z!=Q@-P8=9A`84rGoHwPjpdUg>jOh^B7ZKc&N}^Aa+=QXY3GT);w2WP_c`TQf{B@9h
z5fO<naMFl8YjPCa4T5b!3wx$QsWn)()};517>LoJ=ae?vEt;+N)RWF&ZSRMCnYDlr
zV;#u=nZe7b_`pDK%!z1kl$e2jW7E%)!pgDXJVz|!ijqF9v>>k?q3Rrvj>(EM4UK*s
z0=g`WHP`@mWMtb(@Oo?`%wS-MU{TTZVI>$uxNfish2udqIs^}Us*c?XhCNIRYW{P?
zxS;`J45ha|ku%%8H=hJeO||EiUcL;aDJI6_#OY&1&6$q%3%Mj5vy{6e3qs2WeS&l{
zuP2>>Au!ks>&&FZOl6M6NEt6Kp2BR(sl{yB?K$^E*edLC2nSM928<dTwhU6%fu-59
z@HrNy0)r!k&k-O;4n>evnKn4!VsJR<K-Cwj!v<$z{22sTSpx$c7b8K&LL#Re;B{lE
z6!Ap_1(6HZMi|rCd}>n)yN=|@n1O6a4kQdZC*Qexz?pW?eEzI6J4|5}HaZ<6DOfL{
zt(nFfOsfoZF_t)Z8qWnAlUZ_{d*?h!+~66~rB5I-4{5`OIB9j&S=QDbhV$7x{)OPq
zat40`=!b?jlEeYam;ZD5=hp*l%L6JhY7xVQFYh2QuxX&_H0GPO!2%%nxhSOIAQz7c
zIn7Be5Tk=I>LcQMXb1n!A%!5?REY#*+$~}0!AMOb1S4`zvGc|VfN4cmqnc@emP9IL
z1fO%$a_1I+>tMlSW$TmST^)xDNYoRR1Po5P6ljl)7GhM)4x;iHVlcr5&8D%knopw_
z;&9OlSeme+ts{HWdyFEnNK(xs{X^-DkZK920K|i`Mz(hL%0v&!bVv_&jn;@5%M&{{
zSh5K$9y0O4Tx{lW`oMJ)>I`B*9pYSCWOOA*=mcLaA>5M8CTUuV(!(ao%mlJ(5H*er
z7>1o^$JN7TYv}FG4Z$_v61!y8)lI#<aOcKTSy*$^96ZLBfa!g%nE^q=G0f&xBGlml
z8z}&qcoS`O=b{G~S5>vD;QhHejRgWUv!`)rpiHf5!Dfyi813uEM*4R(<RPGV)S$zB
zv7_|{izcX*>4?HuwV{oL=(0j|xhd_)Y${}~C`99hXkQ`PUx*HviX2tbcD5+mU5M7z
zI^vFQ)NwrQ-Z^?u=jcM6gUmWdOLZ`|^JN|M<Dqr|?&v|CqYHJ8KGY33@EzpWIq0u<
z&|mMMzurNAy@URG2mSR9`s*F^*E{I1chFz&pugThf4zhLdI$aW4*KgI^w&G+U+SQL
zse^uO?ee@@>Y#tAgZ`zBmS+_*DJyiL#4<a_S&gGxOC8->>gd)|N4J(by0z5Nt)-4`
zEp>EjsiRvBj&3zLy4B#Ir@_&!21mCV9K+J!7?uVH{S6NK8yxgEIOuP1(BI&ozrjI&
zgM<DC2mOr>`WqeeH#+EVbkN`Epuf>Uf1`u`MhE?k4*DA%^fx-_Z*<V#=%ByRL4Tuz
z{zeD=%N+DCbI`xcLH{xb{mUHmFLThp%t8M$2mQ+&^e=PJzsy1ZG6((39P}@9(7((<
z|1t;t%N_JDchJAwLH}|G{mUKnFL%(t+(G|x2mQ+(^e=bNzdUYF9B1W@jx2X{WcdKy
zN}PGL3gGA;#5toJ9L4E!vV5r{S?mJ(aa?0I(?qwn&5ptrq%DaRHJjd@ThbDP=V%nJ
z`00QpRxPXHQ>6DuuwakKDV3b9pATA>ieo2ks8M!7Yf-b4QjbX(bl3uIIMGKN-SBHB
z;Jy+I#DanHLd<L~+mhKV4Sf_e0N~jEEEG3OxOjB9jXH0gUG5Ns<qko>rYx`3njC`A
z<Pd}=$5=Hv1fj_x2u%(_XmSVwJRgPn9fHslx7~2EeKk%tF+;!-oIT-)lRFeEigQmm
zuQ14)yVo_X9f1>9SYfU!w04MR3GN>YF6IVoS5tF3l^j@|8G|R;gm4?-pbn0oP1po8
zu{MS49N6|UUf5I8n>9Tp^w=)=&2Y)cnSkXUBzkkEUqE(+tBv=)b(oHKim-{rhSO=7
zVIzZiOMW^81G~X;+_%A(I0WB4w;b4p!zH;Xmr-v|WYTI)Dg|#9&dUqFEqJx#V{lr^
zrI;~nu&gL66d$s<8A*sW9q2&={fRiQu%yhU#!Az5CkCE{dd`^yd%_`*9$CiuAk0A?
zWnfcBPKZZoU2+hoB=q6pT*7RT3-p?_9PcSN9;kV)$88|xji|-=)SkaO{?%jJvwP~=
zZtcB%P*PfXe)NI+r*zpGn4i0G_jXLBR1RM?wjSvb{AO?~6wld0E%>g8Vf+vZUlQu}
zZhJ1JJ<p}SaYBc#1DxLQH1G$Q>&<p9IrY?(u3)`c)WCX1Q8Edf5tROR|8GG{p!>Ju
zx}+P>9NNW0IgfYf%o**y9{0RJx#y)jUuxIhO{!MaDHV8EqJQWo9b32mLq_k?p{?7i
zdoCYj`pDk@=va}^Wv}i0+o{Kf&JMP95vskvzutUqLg_}7pK-$j{obMHQpC}opLe8p
z>COf3nCc<?tp{F?)s3CKzU0O?wnT83piZp-1<aY~iw;g6U7a#LV%b}d{$Ovl`c|y(
z^o$##D%SVh{;2W}J=ytkY!U8CX3@_CdK^*jN`U%`P2g$<{fnq}aCaC7FXXE7vv0p>
ze>tYTjN#Ms#uld7+j?;D^1(e@@9NY6a-?kNiQYY1$Iod0bH`t57p@83QjAO+>d#4?
zNyJj%+NQy~5*lIk9j3MhrOFAre9+r}_x3q`E8AtvFKRpC>+U-pRS)$4>(Rc`PxKx*
z6Wl$rUrL9}xbd4aj1(yEm!|HU@=RzCKTW;h>FgGqfUviF5DuV^t04!<OD+M|d*Ak^
zA(mM%)HGzu;4$m`F5vFPm}f0%IEORd|LFM86gjaWQ!{9DWI4vqaKy?j=V+5dXWL&t
z_VE$onilXtHo#HkNdN2*XbnA^_<rh-Q$L8=P`yG%z5TwFfAEj(n>$wScx5}WYd}A1
zy}6@$%-{avA&xxZ)wto=hVNLx=myw(!YC2Cg!QmAW><McUEWTq?dxspNOk_l^?<qg
zjjA^M^ucEiKDZOmG8^(*&y$@<&$iQ_d)H?VbqghcdI;5iN<$N5Mg`ao>!tMR%IA(3
zci9k1vfW2h8*|oUc92q*(d8U#LQn3@!`xBKbGAbGTXzbc)gESi!0rd}wLf3K@Xpjs
z-q~2y>hQKd-0@IXRF!t;jy<?Dst)(OxR;;VoqeYt+zH-Y#2G|7#xs+>h7P;5_S`^D
z2(N6IY1i~07cNT-{{%Xld^a=<-PU*7<mkLSKe=7+=sRs%u<|O|&q58=>dw2+Z;Y09
zFM_;MLtrkIm=O^Dke3?5NU<(?Hj$54L{!l>J5{Y#j!$(+ZHoxwtd6SR4YT)GCVn@p
zPFMFB&9b=t_U*ZZ=~*&!SAsK7`xzcMctw}?NV<}`mRdHBc?IV?=5!o$1zL6fxpRFw
zrt-YF_kn)S0=(PC2-+=3e*!yqT(*lX3!N>_6icz?2)`xl^v_2=c}E0qjN2gf5k+kf
zRfcm>^=#t6p6?!|>|;E=21oUuouUSd?tW``u-$I+8Wq6p)H>YMwQFa(p6OGjwQ4nI
z+t6)MwevLF?mN9mN-PD2fe^nIsXyF-Rm%<iKl^j-XRjaGfBzJFVArbKIAg1OBG4t9
zpjUBZF1nB_4OgCs`t{`9+gsb&-^K0h|7FUiu|V5p>TLUKTjs>{^foL?b-A-;L!GX>
zeDJqhgS+jzIDXV0oF{{Q8*eLcu)KZzjFBi(N(%DhjoHSL!t4&&{AQkL;4ADNvIXkq
z>ajhs`C}hG6lnLI`q0U0$ZH*5-EX8;^0S1Dt4G#Nt6t3F+0J_NGo}3Z*OLx2s?|#7
z9;}4R+fi4A8I1_8v0!Ti{@3E0otmKE4BX5*YgSq9V0M<<?HCD}K7)#TzI#+=&_b@+
zWjo%}&f4oxb3`54%UsCaVA&2rwU_PHDuo$Kdt(v4sVbsYZ2RufqHX27Ul_;A)@a&d
ze+`^9Tn$Q1oy31<Cvynnylzwv?$q-xAACCYNY<u>ST9f6<BDe{XrFmP12i(*j^Mir
zu0m+)J-3gt0{E$ainbN!w1+WW9>W@+5lgBc63ANy%Ja5Ut9NKm{hhv3dVw<^7Z`z?
z0H1Sc%~)2-{kBuub6E<q=y_jXYp3=+9eer%+VknnuKi|aV+Ad<Ta7BI^{Rp{BrOI?
z`lyxPcB<_Z=cYRS-2Q8!pQYAXmh;4(xD6v-_VN^G6>(h0tH(?$SZ~Yz`OuNUmA%wr
z|GRzuK0TjOhL&JM*pmJ)$2Q(ZjN-22gW%!m4V}yt`E8~o+N)^<TC5pX6-Q>|=94?$
z*ToWZ`u?>2HL<{0kAHB}oh_ZFEwL9Wnz80arQ}+aB+T1CyH^LeQgIy-DO*aqS>6dP
zXrJhATaUc8yIOP!H5XTv6_|C^W6S%fU-Gs2uj_lL>%GSko%*7er})X77xy0NrEWCx
zxDspgQc7qE^ZHK9yenaE4W7nKBBlzk4A<6A?ZG-TpQ)=Mi?#SM()G?eUh5pX&3(&@
zTQ~}=;RD;(-ua7my&w2e<3s(MZb7`v*|%z?7u)py^PzhNe}DZ4yAqwQTJquF4n2Q}
zT-n?CgLXsRHRvt1GfK(20J_Uej=j$6O0K3xBiJxYCoIn$yScBe!`53zdPCjLHJ(z?
zdf>x{5JHk0@!gXATn3BAv|yytu2Z+Mw%oDX&b(QD)#uc+NOl1q-f3*2>2`(b4R-~m
zEn6dzV=^KYP8u9mf`?RSe|}tGbG!<x$n;?u=DQBjN|(N&H_HK09zxVYj_*4mEfL2k
znwdbU#tz$Bdttqo8P0Ls$RRD9WZ!LwYOgu`gV?#8V{PoOfiH)oJ#kyx35}POwa{b=
zpLN_DguZj^p{~r%qr=tep)S1((sSMUGwp`EAL@GWQ14(=5t}pk_PZaSvP)9hY6j0<
zzpwK<{qO78c3SUZeUv9%L7d&&DM#w`<WZLVc=nd9+T-hnp7XvCd!YY^G3|!V_AXN7
zHFuZ?<&$)hK6^EwCh&EC<*2^GXkW_eO~;Pxr9^T!SFN6CXFI>YKGvst3E}J<>U{3F
znK75Q6O*;P^?<Ltu%?Rc&97}=n(}U=UH+A$?pri0vqC9#I@@VkJk#J<L%UZEk=w=^
zci;)HVG9OmMZVO|73;EH+RL>A*pQaX+nLkS`I508^L-^$=#m;}e-T2uzSF;QT;KHa
zRMXI_+sQA&Ur$m3IcM#jt%k1aM($Er1dZV062z)ihnni~^}L=mbActv4RzX-S_hrl
zj52JOBl=JmG5St(&6>7)SFFd*?ELyw{PMx-9?IC_cJ`2^*|TcJJ!YW&3h<mTUr*Gc
zB&t5rvpxg)JYe?2i<GOD8usiIM}hsJ%&-i54(;P-Tr_pm$bj7jxvx$qZd==FW6$a1
zI&@Qa020HId^W)xvyM?yGZ*sF=o!(&HOezmfv^QSV-sd;%=)B#TBH6)|BW}+DB4Rk
z>V+6F%^bpxwTz`N+ePYRv??Kc9gk!S&=;qIyG4WKZ5op&*el2{%Bis@$us6gg&M9^
zq$a9JMe6~(4c4d^+jD~TuzvFE<W5qjhjp#7n{;jYZqjb3#Y&&2!RR+yZMx#Zb4h#O
z*5@CDjOHbMz3hQ+we~%FzD>cKSa`BW;(T-3c*2Plf4(FokNU^9h5Jr7j{V}O*cmbx
zU`zOI4Wsk>DoUOBV9Kd^Xb;eCuG@C$9ayU_Gj`w0vKKE{55Jy#>rP@*o~X@qrQwBL
zJJ&7d*)w(TnbkX9x|2Q=$c^7F$rU;X8&vxvD%SDBIAg}@<f`5eUBA@$pD^2tw%K(H
zC!{~H97^VFTYSe$?Q=Uebn3Fp2kB?1?J_OtGWvp|*xe8Vbz>(FUFoUCOFUK15`I`&
z#4#AU|K_95o!SJOiZZ+w`>wU{6vZIZ-4mTR*I;LI`8IxT!kmU<7C7y|=tlk~SpO~f
zq|7aY&ZvPkSe&U*jbpRm%lJ|3#F?QjHELx?0G<)99O&I_=J}6LVLqEy*@hM<=RI?5
zf0tfpczdA|uk6isid3&XyzS`lH)6zLc{8V<O9gkcrf<YpJ8e+Y7Iu^8^kI=`F5UUX
z#M$d>puOIQJyfc*TKsS|YAUwq<{NKhUp{_lPOJf+pE+_9!vE3#PiJaWL(25?==LXW
z<D9BdZ6~_H#Tngu;X!17v0|39<|yjCp_8@$@!-!6>5B;aMvUzc#`5_-cbGn(U&`)r
zb)KrIMO9R&iV9Uxp&=?Xv>t%W%{KfodM@9J*LVZ8cMZk_qXN(0XAYSZXhv$?ke*E#
zJycB5zeq2j4w>}2j%VRT5J-vnG}6iXuy*-xyz!>JQfCE2=+UEZY?;;mY=Rye(IH+!
zAe-X<;iwUcv`{2#7xG`+{Yb+2T4mL<Ag^^+p3;~ZSO)>2wkMu0f35S4Ep1)gsWQzx
zT}F+>*zd0w9H|{TxMWKgq2iq@VNE8j=bKNgZacSh^__n7&^KaRy1ZR&9V0gzs@Xqi
zML$cw`;Luc1v+R;3*X9^x4x&khpBhs%P^izF!n<1%Q5!^dn*0}p@e#gtMF*z+b5_C
zj3><SpvlUky`}@tCW!Y!OehvV6Z~56W)aFBlRCkadZ8c0TlcO+&7iBdX{TOf*G<S3
z-52A#>@J2*xNi8{C#dh{^j$tk{y<*x<@)!a9BPwU>(ATJ0)dS9={uy)S~uD|t7gou
zR`f5>9!==}Ur#>NMW3gQ$DW)0F0Bw#Gc2_dhh;2vQ+jNFxbFP(b=!EXyKd|+@tT`<
zAzxl&)9cnh--5v^)L#$jjwt%ry0=gF$D5iVTY<&x|JeKJp{Np{y5FRnl1?}!-P$oo
zuPIX;Ly@VAI9g2EGR5`}Z<84Y-Tqw4Aze}$a)dd%7ULCB`+=(<)79|Z(R-mnTv3fj
zkp6wPOxuc|wB+#Vr=8%LV9fZ-88cpPVo~NfQf8jh?$AqFQ&eoUsO6zEbwrh^A*$^1
z>#?(wbA%G(J(pgDOkG@k>5oK>Zcx2|x?*v=*$GnLQL9#qoIfQ#H!a%4)?$lcC(!=c
zuJoeom5pzBML)vJQ?%{KuQ`2rKa21Sb1P)q3iO-NkER#XDyhl)=4$dDKEy0PT#cMm
zh^JKQ;XHGm(C90es<BRHYSd;qp~1R}6B?`wH_XE-N(`>O<ZC@RtIBArMa7dO7G9&V
zAdNj%Bk&qU&k!w6+MUL>w0%v+zhr8|yp)|f>#_KH5w!wWCSP}r`V##AHR|%gg086N
z$U63l<d(jOd&e5+sfVx{a@Sj<zL`iJV`<Y4=BVYV7W^wYA8IfwxcXh0n1@w(Ui+n|
z&?<B#!zKx-Ntoge(tKj4E?mHTba<5LFVd|HYt-9L{pKXYQp6j_-iDA?U5&E+Pc`bf
z{qIJf=vkum;R6Q!RW)kqos)y&#gZ0icbjtno(F8a4Lzwa=^86tW1SZmiZCC`#xw86
z$UM07z5^fZI(xldXyP?0+I!!D8g-^G+FOIa5OYtWM%kFAEM{XFZOhN6_H_oayS)8w
zJ&*Ak_1KUJZ@-)I>oArpw(YYd0Ww*}cHVjH;jWk3MG_X8I4rR1Z#-P1{$)?Pr$%k-
z`1Xk!MNDc|(<0=sg0@_ZoC4AcqLug66N_>FwgwstQs%#I`1@wRaT#MZ>ibiq;`>um
zu^Kfi^(02_v7xebje4!~aEutHBsD$zBJ|8-tVYpZsZqmyzuH%$F1zV9Sa>g<y6aAZ
z4{7pq6a@bYGad{-3+srVt1(LS`qij?!{32i&EI$9jZB-;kgF>%Y>C;nR>2}OmY8jq
z(IPW-&~~65W@`yuX{<7g2PEl{?8+YYA=%e0YY=_2n8UEx+D=$puV9K++&>I5B&{Fa
z<$`C0oP=BiY+I8SroO`1fX4PD#I}L!@4UZ{o|l4kY-*r%6fEDNEjXdQ>i@6(edVr4
z#cErM8KxG{4_YIh(i&xanKiK1*J6KOqv-K8?L$^7>6<qCBZ}E*{L|dq>Wi3DW5H@H
zzq8RkI`Hz;hECf{qAzux&qmP7ew=&Im&|h_?*185m9gHoF78$j9GvPgcEMRWA=e?=
z2F#)TA!`DB`R1Hjg_@-nywt<VM2hFRxE+937dYRyJlgXP?|wGHeHQ&i)cB;0yEobA
z2YBkv*aLmIX|SEN^@E-i@Cf1BcsaZqco>g%_G67aI4yk;dzu*j3dD5me&FuS<C>H%
zv0K64g_u7MO8L`<p8@>zstx#|r&Z3*N(wD1{}NEd`cxSy`u+9u$7c2k7Y+~qC5(-r
zXq`A{cvM062Y<QHlOR?^#Vp2REf)Z)|7skm*)EuRxD^}G8C{z<>}oA@q}CWWy4GGG
zZKs#6wUw@}rKr&r&Q_@u>{jh<It>e5OXms1yVkfbbiM_9L#u184QMSVk-Z_*wf06y
z+&Xe0!mfYXR-~4OwwU#`G=s(btu6GMOIt*ZpNW9c_Js&rDHKdMn|J>(h@%GJx5yQe
z1Y*C*eDlVpp?~asFI=<u!fI6n!Lg0SjUtG90CgR2JF$8P9mgXW6LW;ZODJ^3a5|(B
ziy_2wT8KoC)Q-m|;626mz`<1=thECo6GONWFxJhQ>^6*hi(>NLW3P3t#D=~g&=}Ly
zmAj%Uxcf;MoaEB@8PCXOTmxb41-uB1@)u&&V=pCG2V10oyK1$cR}Ew%?LRyCzox|f
z8lc%Z3THA81~eQ%w$yL|UqOXgNdrH3jE54-;B+q>Dd+$VFO!3>?Q&m@Z>c<lP4JRa
zsm|YybChsBLH!U{Hgq6&?DgdDh9fw7s>9^T9W#d)yeLFSL=L`QPoCOIxGozx_T@b`
zKK=yE{O;`rpCgl#k>){J9zU?;)Xk?zKl!Q4{|V;wlbtu8dT{3-4_0*fkN*JfV=jv1
z2{E;Y{8E+NqOID*_}O+f_z1SRPlDrEX5s3!xzGe2G+^#wX{;#lVX4IjPIq0o^E6A6
z53K9usk$9cAEVO+UuK8HN5YTnUC{6A(H?xonV9QywjJqRL+3wCclI-vkAHFdFym#H
zZJSoopXYKp9k5e9xntF1D|#>6CG`dvvQBP_blJVB*OP`{1LXEaHlGZad2NP#uLmb}
zfVjLmK)#yP7q>Hoe)+ldi?md-{wHorbP_w*eR5~R9lmbX$}1^7J*xNV*kW8gDsZjf
zR0iL?^^gIKqMy<uMzD7&AoycG0+D6b+W-juppU-^ICMxWZzCX$;1K1IQisLZy9_Xx
zk$^P-ww$Jpw+S#DT>!?iD+u$m%nx~t9H3q}1TGLlIB79(VzV9tXZtIFPihEXMmXwZ
zi!7@Hq>4FBRu0=`y*j`dVS2_g>>+c|W8|1VORtf`*4d^GEJOcUhGkiXy)`-P6?05G
z{A3P#9U$Zo%9+~u$sG2Ey=IP~nxEu2s4gSz%ws><5<i&->JVqEY@2w*G`uGs>0%yg
zM;>wPna@1d&-R(e8Vh;sS0Rt|6!O?J=AkbrXL@6_i7H`=5<r?sxw9O5$2`(W${l$D
z(?3dzDap@#iwo`5kh(G=QqPSmR}DgV9Hnt=YK~H6LH2(4Xy!1ET+6vBTC8}4RxR5h
zte(?guWh+|J75(CkB4ZyVB+g}GdQ<Ybhz*!u6uh<j)1lIrephXe5fxvaO@@=^YP-B
zeFdTxGTp*8`?AIDCeOHx30>vD<5fe!t9<H&UB}hn0X3GDgRRX|C!*@_I{(<o_O!Qp
zY}Rr1@#&F=x~gG3zOwh#?L34-Yn69zZ|kU5>;>Im)Mqcmp6o+TDAGafNJscMHv@o_
zfA!ec_WtzP1N}I@X@9bBzg$P8-f<jV%b_)on0bu72P3cI<QVx%ejnZz!BxIxST)~)
zRg$0l(++g-lcP4q2Jj-Pu9fgQgv=)&Y3EGGVO_e6W4m`JkEtuVhHlg4w{M@>NAA+>
z;>rrzOH7?Y5iTU~=-ofKAz@aZ!cjaa*Zxbo?iO0W1GLPa{IM_o1i}pH6?4FDTrm-4
z9jS|CEyf`{OHk9}_|zP*dq(!(y<K~L5W8(y`#IvA4b(Q&N#?Mhp^;-V7Z1sNQI-zi
zjKnOJnMph|o0vAU%F-*CEoMIO@(y%rnfc6XgEFHP^7EyVa(F>0yp&Q{jW%h4zNrjW
zPzG8490_b$IrzvBXWn&vw|C+o_&~kd2iH^-d?~CM#!6i*JtMUd^*<q>lopP&_8JLM
z9!dy&BMeJM5!S%+LVPwQ;hmkno?tuY8r>M=Izx-=G6FBe{Ko<J3`zMxDgO?}=M~Ba
z95vV@MtM;sl))O9`53Lsh|d`xZ2!a7SO@1nXANhVvB&I^lvrHekdp0;U!Wu@KCh(z
z^1-wFsE@R}2J0LTk#Qh?)rEOUokDFFl#3XYwE}02RMb(M_&Mi=pO^tn7=hiSsA2=w
zz9=l#71BG-HgZP!sRaZ(VCIW82EZo{c}Q+BE;Gqb9bwl_s2L@L!Ld?)TW8oakh7lc
z6Px2`*EdGEhdfqtRfStiYhKNxeOukrw6l7QZ4KSFSPp{Bfw%UEd!mG4RDJc>f)QQ9
zknykW)gB4uvI}dZBt+CoT>55BI0&3?Tk2CipG}0i`}d6OU)QnoG#xA)PaQJ(!FKA<
zK>J${=&}u%TXmqmMLreyN?xu($T)etjy$$B&U*ICif>@t;_S7s(F-}(IpXb(I1k?J
z(p`?Yv+QQVFKX|g1J7Kg<d}0F(8<wyKv&#y?9iYM>z>FR8`|=x?V)a6Nu6rLR}Q{=
z=byF@9c%BHe_YS|(!nRU+d0I=^-J}~@rSx@zIWu9zNl;mxlLJNE3W>LV>tSkddY8$
zK)IcFT_5vK-r2KF&u5)BoRDaKzH=7q1-Bf#>?Y<zOF*hvGg}M7o{p-Y9$Po4E6a9p
zG?_!ZgPoC%vK?HTbOn22=lw9om5=*Y9r(N9DY&27PKXqgU$)K0dFsSe4|8-$VcpmB
zsqJWI^0Nu8@LCRM7Tu3rLkerZUTAQriI;%?1>7$k>^T)xzdZ?j4|mA=%EG0I>Gg9}
z+jg2byijqW`gEPWOF#e01?jSn!A<D~&i4iOI>{1-Hm)#Bpk)n>`Wkx|@4VK+c~`hx
z%LDC`JGpn9Ik9PS;#OW8;4WYG{qs)lq{E-_y*s(<ab6qMe*4;}^3#fI!2S#_L(%bA
zk1mZU`#Orb{%iM-4n<y?_8&(duv?)0t1$2199z5JcT#)4)?Jq3)i*;YC1ZLCaa5u{
zQX(1^S6g+fNyFwiWG)-AoVm2XYX&w~IX*X^nm@>#E4rhpZ?;$8!TbpLN&2w!gj1_q
zoN&tf_KAPlGC##@W9#6OQ^?r@ov;qEwOAk5zyqNC{`Qv6ZS9rNKI_zVgm~tsUYgLJ
zwfhmG#9I7Z2Rh$AQQ7{&sP=q5drMBY&?2iIdyiZT;&tYyPwd>m5hB&<G#z`+%Q{h&
zzGc50t$ZW4Xyn12ay`ub6Y#2;V-fwyNniKVC+IJ5UH~?A*-mxN*w2s4wNp3v<$nC6
zUi!)XA36#BzWc9^f9NDjlPerOQ*uSZTpOO#_rb2i!>f0&ymtQ>WlK-#g+E5g(o^4v
z?d>#e--F$~xul)G<?(LTqUZ5q^OI9obRF4C$zrXJ>$6^SO-bXkuNS%^&;i@N3tpLa
zta{qZIRvPDe#H8W<5Gg<q4LMTSLuCVJw9XLF)uhM53d?&FS(D>p3l9je2C#u@al8#
zdTNhGKHzS3O1qc9htN2-5_NvNbN+FBdS<1XZbsgn+Wnsx^+?D3_|O)PKCetDueltd
zJ#sn1Gu5*RB|dcWz609x{nRKf-9FIYuuXg7u{!{H^5~9J+H2`gFSTtBPnW2RwFf)?
zgWCJf&f(7Q9@QSM@XFK85Pvv<9wi00HMyWX*Alw?FY_+a8{pg*>9WEzn^wrG^31sz
zN5B4dIAwWpSjmGMJP#uOVYw^MtJ~wZ>ws|sTTi+?;$1?SG&~D@Y9*e8lGUh#4{_iw
z7Q6cW9k|AbhX#E1#q0E0{Nl^sK+!f}Za~STQgwAZetn2K$?24)Of0)0*j?RoZ`bP+
zD`TG>{i9sQ@%R7jNiD8g;~mp-B)aTQUW=t|3XRgT2^yddnw_7^Q4d|nym}CY?f#b?
zb?Q2n<*LBzthOJLS3k^?nP~oDj{TfLU&9i7<~4m+>a^614II6&?S>Z39-W`m-?Ul!
zPTM|RyB$M=%=2<$7LKsFFVYJMYd~pR*G9zOX|Do&KA=Oyp#^S^FL?=!5Uy*sSJ=7=
zei7m1;PlJea&bDumDc8aGx<K-TrA~NHOJGsN^_0V_B@+MAaac}%ABRJp!i9e%?vh|
zBn{n!P<G|gBd&1Q3f;yBO}J?MiwGz6b}t>*+k__e!1hxMm*%kqN7uf<YF~Yoo=H0#
zN#oI`btv9<l;Q~C!tRBxJ%I{ZiV=1GbssHx9MfE4rQ;I3v{r7e@7SDNLr%7tt2~D=
zJB>_Hf}_gmF^?)<%ZV!b%%h4|U80H?4x(~N+(=0jBY}r(c$RG>i=X60L8f@@Sdc8r
z18h5aG!|9%)dy3nTuG>84dk0GUHJod93h?m$gz6bvqtpm3Uf>jU-`6S@@ngFs&Ie>
z+@-|jEaoSrmGdeJpA9dON3ClcQ5+}ZL4x%xOkYJ@`s8@LM}C`Q-l*b{ZB&^fSaX>!
ziVHK}pNh(fhb8UTuoV4v{N(s^Bzb<}yoeQ*(YMbxz-@Wbz@s)T$5i9u`8a@ay9qT!
z6d%S?w;e!V41`Z+4W!<JnCG(ww$y_0I)#BW0HOoj&rn7P!~PbRnstD(%nMWk^V7@m
zWqj+m_P2^o#wByl_?iFMt4p>(*QQ|KQcsU2R&CPW7%&EqlFJLC*@uCX!9Gu6jCkB<
z9&5hYVW9E0=>=@l_KZ_Q^W5RnxBMW+xycg(?IA?Zw*A}G(e$S9s<&RubBUGh-02m3
z_5FLwdRf}+_vp9ZkP#|pvu|u~WegV}#U~9ZDGPQ#f2g`=V9(Wwk(*Ixh&~=O2Z)QS
zZxt-<KmMz}YQ^({s5~-2NjW2t)nvBu2(kWPx7`a}G2L%u)2&175q(bNx;%Em6`%1l
zTo2hhwrYFl;pxXkFw<YPARfEy;Oj}2CSGCxZq6V;(L8$nIsXd2e{->0czC7F>p3{?
zHfIrp(|14BgY~=i^(4+#5Poqx!`}^?E5kAh3znR^P|MT`JOe`8q3q5jr-(&-X|K(0
zk1H`DOHLixYoGj7TPHt1gaw4swdVXs*V-pLx|Vg>XEfNAF77}rQ$5CZV{OxU;5<<v
zHBM|wgYG0XEKNxwj|v>{^?c>%sv%v=(+g5xt@yNrnj+NA5~Pn;4R9^5mfYgH3W{)M
zb#oun(%XDWT5C0Zzqya6F3=mDh1OWYw6~!Dv&VjPH!h#l@+8HyO-_WmxnE^HXk}sH
z+-?chxl#P^^spbZE&qJIYzrWqaXcW$9KC3bq=^~F5p=Ua`RE%~6|SQ4I9iq4r;mNG
zsM46X$eV4$@TIb-Ct*r>c&ey9JXO>sEr8-%<%u04g|@Gpep91QUP`=Z^vPxR5%^;4
zUD{xQv)u@6whfrOl<AeIB?})p{p@@&&G}F`$F^;>D|bO7mHGRrtH#f89i^{Wpz~Hk
zCnZ4*{-}gd%!l99OyrF!YesGkeOm_{rg@r6EjA3lli|cl?zlY1c0&3+)Q#HDR>WFG
zPl?UbTNUDYuKlQ8AmHLk^n=`732m<eF|^5ZT3%LAD9e&rq?Nx@Xhi#qja6AQ&AO?P
zb9!7O!cztRp!os;`TBr`#OBo~`@)`$X)eq00Y09<0cR<2c!lo*`3soefPAw@Vof!Q
zC1<toJS~sz1%p?$IhLM@H>-nwH*=Nm0vJLC{hsEMpN+v0<x_aQlvME2m(voqvCLEU
zh~fix%93?a&9a{RP>M6swwmoyoPmV%va9t}ywSAMj}o?Z!usqI&WB?5YLD4vwKITH
z1)I+<!&ahVQ<|?MV10T!+o2!SX{FmG#I`^wfB*TOYuWi)rxMfiZU3uornM~B;!sDy
za-UXvhqEW=KG@Q&tf3Cn8Qb6VsZjnl+<%zvRU%d9iPv<G68AvdMbudK5_@YdFc~T0
z3C+2!7wY1}JDj;f;<>-zWk6n$<=nDqA%u@`zY!x>H{CnbNjc%pqb6?~I`QcNfUSzF
zm-Z9w;;sV+^;M<}<;1q#>1lAvyX`yRljVXhhTa?vnPH2R8E0wxVX{r@Iggiw#|_Xq
zg;IrQ#&(&%=n=5+hqKS#M>%`!{6Y`erK}*eoQc!-SayrXj^zbN^QhL?q;j23N^*uy
z--X#F$t^yVy#iXa8NLq3<JQI8=TM%UJ2L1H?A$J(v+9UVnX$Ranz>W6OVH}1{Mc~a
z$P$zguCw;@HXGZl_0ykv(dVOESc;ND3~Da!?(9+pyQp9jaF0ve*OT<N^O2ff&N|5Z
z>3c!D7DA^#pyHDXJcU}pavTM_k50W|_+os6=RJB`z>*vVdnakPWj{F5ONl{EdG4;#
z#ytNKrM`k?sE-PJO&gnbtNrljdwZrjbeq|KnkPBDo@nnv%+nr2y}5pfi`>{#IUo2?
zo{BTDevu>IgX_$GwdMl*Rht6)g64nqI7MH{x<uQYx4*UPqA%5csvWhiG|I#5sM+hD
zE2Cytd?6_%K4sdu8|JlIe%Vfq`u3hkFRz|+Z86VVbTdnky27RR0{(?BzniP?_QiL7
z8Ec@N+fQK%<;`;#KA^$sQb#<IZ0j}~y-o$(3p{F(5|rb@BbEZbdA7pcz2n)6&_W5e
zpRE+|39+9U=mn&O^2(K#k5USF+*`sAgdMh#S9^^vV3@Vj`6$I+r&)&b$};woltQ^H
zy05{PFfgz1AO-d}XfZ3Jy|x!hShRo-X5}k9F|kMV!cS53LYCmDQlHu@rCr9VbuDo?
zZq(3x;8JM!!nJY@bUr?jug7U&EgV(*0g2tpe^rNhU?O#he}v;~dsX;wq(F^DFUHoa
z5tJtST?!b4ILDTr9L|BYJ6X1XXVuimny8D;_0$wF3u`hpp2)A1;^>lJ6V_K%6-qeQ
zG(1bQA3v-xUY(kAygG$)W_>l!BBp(f#$w~+G1eGYNn<}2O4`pG#JddYc(&xUX-IVe
zyI@;I3y&NiSsVx3ikV)5cFeh7u%o3Nj(1_DHV+u=ac3&nO`E^4UUTl#PsJw){E8x4
zseGDHppLVt@3hGki$F?nCfiRA%;SVY3EO+cM+#CxDC4+O*B7276iOIB7oR5Z2I=j0
z7uumLOn;J4D8(lUQF)ROl_v?tPj~LBWcQxyl6kBuj}oB2dBRpB{xr5%sFx2CqVgai
zT6l^8{}NBsOdqD>b03X6LOA24t%zp`g3A%NpCJ_LCIk<qajF}Y=LgjC^xj=~J+o>5
zb1NE0kTwUc@4}OVLW_jb6Zm<YZ<(hDTKdj0cRo5OlpvJPH~#@&o505h)VNE<`fxrw
zDBw?Dp|MKxQG$3SIp)(J8Wc*s`HC;kaivX;{<+qp%@cYsxe}W%OOcs&CF$h&zuDu0
zLhJP85{n}#&kj~_KVGA_ALla^vmb|jgEJ<R9>;?WbJd@1)hOP-l5-;W#n{bXjK_@1
zdokL^XGt^m@75R5wJyh**E;Alu0KtXpv97=pLa1*v<aFKYXX!%ivhtOPQed9DWUi-
zYot~yt<*2dQg?j(v0t{|`-k;!{o}p$H!I(#Z``q^vf<gIuHv8@4pw(@c$K$!c6hc9
z`(`Mw4w`=@sz}fDnV%Bn3eFB!x`M%Z!6Kzy!BXXR%?{7g;jO`$L66cp++D0(2!lQp
z!$%-kR6H*{%ctB(g;PF6T;ZYcPyns1aVw>L%H^6F?w%KP75m)9p-7R!zar49id+nU
zqvjS|rPHr9v+inl@jU$DWc<x`5MC7^s0MVJWGE7F6$h+d)uPP>_`MXri}1S`zjdC7
zO9$BhU~$CFKD(<GlT}3#9jx+1KsLj`%pd@oz4iqV1bx2ZSpgUSx~@mL0zP(3g9kH%
zGn5Cl_!#x8A}hucV2L{@D4;lqwj1%g0>4)kgN9(Z8PN?Se<LDm*_sc<w9kWBDB>e^
z;Y-7HL=HuQGYW1eP!beM{7P9d(4?z;u3{Iv&hbK(JMg>9VnxdO+*&LH9<-7JKpC>)
zLl}+GA`VB9he0s|F9RO}-y_%b-W>Y=jFlib)LIPpWou}(R2A!R8+Z{KCCpV78ugU|
ze`aX^%uuImW)=G5n(GA{kRj}t$B18f!kbab2ZHBX0?1C6gS8rx=JmS6KG(dUFQR6L
zZUDHLA7NinL=nZs?%|S7skbQXGdU0@)9o27GVUr@<r;;?fhmxiY{*T3P$YxF(8MI`
z)3dzZ;Or3LK{ja$c_U~97;dk26-V^E;5;`PpxDFLJv%&c6hwLDGrSc9p)7{aMXG$2
z-qLwNOb^uNwlGjHY7Q28T|t-E3lV|vOHZp<wyLTa463TCD)supI}BUqRr%1l9bf`v
zQH3T>fw`{WOrMtmW?BmdSq%Te-ayb5Zt_WdhYxl8ioI^O!4I@;$_5OhYYi{)4J1XV
zmTb5$H1WVi-XLlSuL|HJ+z_q>wJzao?Ytn!3JP7QtIAZe)l{-|t{2n7hir5gOvD&%
zb)jJp&Dj|A5Cr-#^x<7->6FxoY(EB@>?~IpLns(b<gF+=6GP$ig|}KY*{uygHp-PR
z2=?qkO#`Nhkk`+oFBq_EHMFG+ZK;6Q1LTzH27qj2$m9)$y?zoN9s(@}VF-ica$VvL
z1;eRecovvvbtol$;0Qvg&2wWM>%0}=S%3Kt%FXo72(PL_mEnnxxhQ0qb=}lMRdXro
z2RUT;oS3j9M-agr3{8A?2E<_E6G0cErVEsZd6*Ftx_QAy?;NA|!qxbx3Iyf}H-mw2
zRpG~AKygx>&;_cqK%m|`+bUWUHb0Icc450{4T}cC-Xg0=mHCABE)GrH?uYUTPdpWx
zczWWn_ZlIE<otJjY#RQLKG8+21(>_KDm?Lh%v;TwBOlLDy>co8^b@ik>Rb{(Hy>xg
z*6_ry{K&yaXySQ-5fkw5OyXgK`kw-Ol?n?IO0-Em+dIP-UgZ4YETERe94n%Cp6Co!
zc+vw}d{sg3i~y%B#IP1J0ZkL65G)GUh3g=UJ{Q%6&ugza5w1A^1zarcMi)>L(V)+R
zS?+@}^s_chT*ywyD{&JDggPF}g3tOOkEkPk&~xQ#X1Qi1L6_fKY_y<@<9fWv3(Y5;
zo(w=7!;>M<ADWzPK=Y(C3s_ZXa#1OOzVPIw0$gkoSh~>Z$wu?BLb9&nx)z>z*y8`>
zT9esoKH3DQ6TO2v11LPX*&<+@LAc%<DZ<$Kut;JFEiLi7K~H$HGCbKVMdMN^!9t)W
z5ybSFOyvIyN)kiilaUKg4x=9QYYa<Ns1>!EX~j7fp1et_nhehImaxGv{!b2zYC>t5
zpW(@)qzWG%FZ%Q`Ccp~wafkUhA?tW4B#Mk;$7gyy7R_tJlc(?>Yz}WMDh^MaBuZ6y
z^8IK(G<lz?`vEK{A{C3m6KBGUf{0I?q&|XhKwj2{7h&zA>aCjPEe_c8(`dCSOj@re
zywUu?&<J7tCm)9Ho%|RW^NA`~)yzEPQ*J`4&PDN^2MJb%^MyX^kwR5f<$2H-iwS~a
zz5vYUfIUtM!jn%_`O5NTzwTn$bF23`X^>)7u($Gso)W@cm~E&H#)S)&Jc0iJfSFJD
z1Rk3FK61j7&x9s_5-e9}`)p|PS3%^<x<2{L%yT(YN)r>zDu*nbbr+Yb5(nF6MBL?W
z&Y*JFU%{F&m6@8@v{h%BU8lv{8Aw}E%)D|jO2P`{la@lUb4c-36<YRHos$`KWCp83
zc7yqGaTQmU0+>&iMvBUd4B_SOu#H|AGf2>6Ar*{x$~`uAdC__JzA7iauPTpF7+fM0
zQYDzac70f?j4YZ__akXy=kx-@U+4l7Ud!gCBJ}0iVao-1WykaUw?u^ex1xTiAw$UJ
zFytVG{Kt8YiC$$j03GC-N0FKMteN-RF+i{{^7<_dOhWw6C+4|bP%aqO`Cd>A3rGTJ
z4*6&5kQy<y!;{Y&4fi}(BBVs8i*<^vLwNGl5Ue49L60%5xFTQ)f#B%yVIAHq`-0Ze
z84(ZDY{80_;-86n2qnvdR6wD_{!$>r3i%ZZ04V~+bJ#=ld;vylykQvk@)O=1o_zh>
z|A$d6VH3Y{g+{%YU2WmRAu6lT;n}c&=VIO=|B0C}&<+Q}ZF58WL!DK=Dw&{%FP%#z
z7YrTd8iD5P%Dlyb7CwAw`0yg5R}VJ|QuuIViMQA%*)T}`kz(m)X=$<71<E!<>vAt5
zEnnr+iu)9$-lDPl?RL%KAHZr)kL3RzDgG`t{>~dWn*Y^5t!4scu2K`zF<G&~7W;fS
z@o?0xwti5n9JYw|znrT9(Jd;5xAj|aY}JKWD~>GMk>(}Wb%^ud7mHqa1AAkMJA-Si
zL=iq6)e3YCLXBE^rHR)Ec&&n$0CwY8pZ_jVEXD83jmu>MUbM(x#}JH1ioS;?HE6;g
zAw~`S?%nfidPH#OS};HS_GRz@&I=dH+W6)|)p>ul0C*An)?#c5xLZJJ23HTPzic4+
ze3WJXDjeTb0KaghVFa|Nz%T3aE{?|v*SC22r0`7+OW*+E^@jv%8$g*9YFD_5L|Qij
zIw&;}XB5{?*y}-D%fQtKp>wOW+hM`U5w>ghktw-6{NHZBLHcjLZF>NhE%+_v=W?OY
cfAT@W$wQu<`^^%O|FRtW`~Uv^_c-wX0cv9~O#lD@

literal 0
HcmV?d00001

diff --git a/AddIn/deploy/DesignExpress.InventorLink.dll b/AddIn/deploy/DesignExpress.InventorLink.dll
new file mode 100644
index 0000000000000000000000000000000000000000..222a875843a417cf366ada14fdeece694158738d
GIT binary patch
literal 47104
zcmeIbdth8uwLiYknfK(?$)risrZ%-Lq=b~TNt*-<v`rsW`fg|`EtW|#X(LId%p^bw
zIi!jRRzws8d~tb+y(oy{RX{`p^!oZjeF0Ym<)QNRfnM>!RpIyftbNYRo;*kg@9)2F
z+SzNJeb)Nywbx#I?R_4ZY&`pe%BPg_<MaCKN_`oWKP#ks<6;!2OXu8Qs_u<^Z|;|^
z4d0vFvA;J{dmx?KmrnH8b|nS|QiHXf$=dYLKyB|p?dr|jYx`5($weh4(fKa)mNiOs
zUv8^+C9iy^*V-S{TWgE#BBef$8XD&P)Cx0dk&w4@r*mRBi+cX})Qb0Hd$K~RP)yTI
zt#_QQ$yJd1xl(^{aq>_6FCEn?b-DqyXfS!vAdbKCITSc2eIL_4s?S}N&ZN6=T5S6{
z7<T+#e2kwJ==7p=vM)tJ`4Nxh2G^}!q0}ncV5@-I|30NU)+*&nx)OzxS&g>pff{gP
zK=!2~N<~Ltq+dM~I8Lc&*q$#HMQsWr932Umr|e-$R=j3azGg*(4R-xpU6UzRDmaQF
zs_Z&=B?urF?F6({M>{PwEv5o!7yql&^b<Y4Lly1S{H#WwLO0Q0*rtI~CBTf%x@soW
z;{KSwG7aqmx5WHaX;?>QMtZhps?!acnVDXvnIaX62P)&i`i58_7W^n}OqBvJoGL?E
zVn^yQvkX&JELe3`JQxec0w3so%^wfNLJg16ehJAlRrP>pXIRxh75`(ZBC32T2t?C6
z(P|1#jYhMb4{BGHL>k`e3XMQWB-6K&V^LX|DyLRO5$uZ->2@MjfGf%(g|bL<U7^RR
zPe}tQHJwVKR3%8N3I)aq|4Sk#&xhZXK4GVyrq=T;Vit;(C@NkH&VYQT8buujIapbx
zjZ4Ax(c?VLBb5IFi)UGs*`hh?7&QAKnm)+lb{0R<nl;Cu+2DhG3yWT_fVCL)DXqPV
z^4GI?%qyVzmN(E;6~*2lJPQ>WgyQTVgvSj++z)U{jva*J@C1YKe>o5I2|GQPstqg>
zEUrTV<L119ah~Q;%KwB#NdQF)3TW0IgXZ~^Kg8l57QfS)bB{r@ItcmWS?pwyLV-5l
z`UaZn1U>J4YWfUsu5VP+J3apU*7RRlk`LZu*Ubaa3CvB4;30$`bJK7bY-&EvAe+pJ
zs`O20G?-d|iaKPfXx;HBj$_8k&QZxRv!G(lYK*Fr5%Wl2v5I&wgD4JiLYD?c2&*dN
z0S8mxzaSnd57Z$+p%JO@m#fr59AetUqp@g1I2aHA><_TYK`YTBDT|fA4#2@WAOuSy
zbEehR^IT+3tuVQO@v_*7IGsXziu(L>YVBd@`U9o@P`K9qv{EVbnK`57xHlG;rlrVJ
z^Xv|$P67_Qi98t#HpF6~*MgXt!Av9Skp+?7Qj0~z%gySUidZ1q(O9Hz2~YnN5MgvE
z7DkU(cBAX~*@h2BTX7A9`Ap)>DC%N-IA-XFYQe{={~dS?l8Wmwkb2~GWPa$Qt_B}u
zIQfZV+$|i#o5=f;;Zsep1eO(r8j8}N#kfaXe*sxL{Uz{uCm)iNkIKn!jy?IfoV-I$
zJ~{T}i*oXPa`I34C&TG~@?`x1I~@w;H5g7;p(0wp!%iPR_RLZ_v)oR%k3F+l&b-x5
z?;d+*pPcd9Q$e^~#T)(VPoN?3M^UKl1suE<cd%6Z8!ny`$t;C)7KmFa>y`;mFI2fa
zJ3YhY*~e;^XP0KWJUcPV<!N?}%hS-=E>F|mBK&LdQMT=x5GuFpFx1f#w}jWAn#(nZ
zj<Kh(yecea3JZ|JlvBvH5;pboE2H)EtD^O_Gotl1)zSJHGo$qtv!eCWYNGYUv!nIl
zw?ymxsDlThoX_z_i~U!atXyMRued+>HtNu*<Oe@&%G)3W5Y6reA>eHg0^SB8;B62B
z-UcDS4MMOo9;)xcnjadsL8w4>kBnK{QRU5^7&k)ka4g(_K#uuSt>OajY;FgnVj*lR
zkb7c5*;Y{F>MRQSYBi%%YM-hc@p9wUs`z6bze8=l-Qz9w^+z<nDAR`KM&Wn=310qO
ztMe#E#5V%p`8_{kr^LaDsq}>yQqPx`!dkEWi@Zbm)X9*GJ`+3+4o6m%Sk!wTOO;Ji
zK}=EP)rk5t^ni&m@I@T}`x}m*GwlfkrB(MfAUxrN1;W)W$6?(mC`Kt(uS9zIR8$D(
z0L9<XRGGdKcIDKnu7V-hv{Y7B)SU*|TOxHU2(*$wQ~?ml@G1h43#Qt^rdFdU3f0<3
zc(U(dCTs{xL=->M9;)??IRVuJ#m}4&s`ZaK!7XL+GqLO-$?9HQ4|kn_zI#4-{slc2
zMaW<DrT)>r^rhCom|PH;da-h?H><Hk-2$g#V;WPw^sR8hR&OY{V$_D<sq|-2omz{-
zD0h=_#Q4cOp`?OC@C_2ASBYI5cX;a{SsWf(fpZnF`Iy|PF^?z1gRD)R4hgKc{Apfs
zc8T&iFu>n%T;&s(u@evBdZ=)FPtTJKza16AIoP248`>+=FT%`<+!)S~G2~{ta?V_L
z7_q(fMl=?zI|C4P8wgAY0Fw-FBrv%rR(i%bNGkq@WtHi_P7o#1f`Ph%s8EfLQVXag
zI#9@kbf9d4Kx#9Jt=S=t#Qo1;2b?{2J%mgI6ijan;7XaNdd=f{HH?qB79v-vccbpG
zQO_~H8$#$(Ol7v9$*8X=X#47L2@)LHienXY!0S1LD4uu#u>3|xDTW@A3~xt;aLzO;
z!#h@Z{2b!gXJ=6?P?z%#wSYyUy+h9RP6x0@&ZKGCWEONV+m9heC<Ry&9V6r%tO#!q
zBeXFWBY|9u1dJFV1b|6&jF2;81lLXCg_452KrNt>XfKc(8zUn-@?7B{+aH4`C<SN|
z?Fn+ubm~qzTaL*Sga9y!_5?Y@6Igo16AKFR1hs%lqCG)wtS5@YbM~Zm!W+oVui4Bk
znBNW4g5k<Y)mf>t7&g01Uop<%(csA0s0|KpMJdU+Za27w>23|Pu+#vs-l|jtJ$V=A
z5M~Cpi^t$=O2K#%?Q3!lX0yLx)r|ByIAVNeqOYsG#56wW_Q1kXA^?|U_#9LSXNOYn
z059odWG}d&gXAw(A~jAtea|HtrGQ2<oFE!G2RT=)OuT6;i2z&@Z6!I+%1$&i(nTvX
z-DHy})C7)~kxVNG7YzP}t+h7XpT?Dv>9}g0(kFG?jGR05#O*;_qXdL?B*XhqA)Flw
zruNek&lE1WUJQ7q;NC#il$-uHOd%jlA<?Fg%b8*a>o6igUO?em2?>8CRww>oDyUE5
zb1yz-zQ3QxaMVNinDvk0_&9uigPpNg&wbNT)L{|AI?#*0<GxXma?o)Joi&q%&O7Nu
zO2KlH;q&N3a?V?*i_HHJoReF5_3nxL&0OXW8JVA2z#`Ezot!(<`+%M5M-dOV{t~@&
za63Y;OxS=-9NGi4k7B?i8BWnYa<Opg0P)U8fte9brNP7_^_{VZoEXGL#KO85No8=N
zZjfjFk<<_mF5p2R=C8XDOhYt??e#_A>a8jzSLGF`i3Juk1do%gS?VB8=GJb77A__N
zFW|3vW_BzxgdL0(FNzg$w<MSKv7*#4m41o=31_8Gj=ui->re>4p@O$82K80-3GkG6
zom`4B-iYJfpx)T?0_in;&`otd>M?lo!}{Ct`6oWy2YU59iT$|x3hEv)aAq}56FF=E
zu&g?@9GfY3ZIr^$km%e<&Y4Ty(<a%q6@_x^aVWbShm6&j>HsCtYY;hO4SFl#v9F(K
z#|Ct7zh;IdRRBq%!;+kXU6=qpJwb?10z?%6k!T=t&U_c>H^&Y{6#$WFAaXvvfow<U
zjM+*?pTW&2iAL|@X(jRte=K~iMR6TIh*G&1GOIDBc3~8;?Lt1d1Sg`(SwJH(q2rMW
zCUi-xB<r|Xi7}z61v^Q!o#dS3T&#&Y9G?`6TEHUFSmca8;}*4ZJdt_DhaLRHIbj6d
z8KoGYNQNC$2<OyM8C_gjP#38MED~)NIcK4ZwXz^AY5|KxW07<7pA74zFm_}Vg}MF3
z96y#$Qw-oFy3^zwTtK{uPE!k5B-&7N&WSEoqM%Mw3s@u?i`=+Q9~#r?2DUZzNK*{p
zB)Ze&oJCYFc%-QXED~)fIp-u7>$-wEO)X%NXe@H$I{mIOoo-}XQ+JwT04LF%Cg&`s
za>1RZ7O+UPq2!z;F4lJn>NK^0MWV6DjqCKg$8@@hZB5;2iUFKNcbc5jOyz<*O)X%N
zXhX?4OI@tL7Sw5K0gFUqksH_P%gjy(hdIUF%b3zw>B(R7AvLSY;;NF?D};5H(U#?v
zxviCZQzJinR%N%nC3WusWZmT`MyU&nNQU2w3gMg<BDTy~kuEG{Q4L@ux_jhw_adn)
zfFAcdt%SxP%#9YZc2En*BpR8V)8=9=EeMNRz#`FD<gjs*q{;%1Tuvr(Q{|lPIj6e&
z)qJPcT?zTRZ74>m0$37#*Mpq%HUgbmIcHuDXyVbC;a%gE)V+_GhlxpTV3G{K9~HvI
z0u`yNa1bwZmJ=OjcI42fGLtHRB++J)i<PB1fOv8VR(|Icf}Zl089B^}E%tUtSmbjS
zQyK6i+G29CGUrr+9*ZBU$N1p`^aHhlN-}&k{Xot+jhG0fGYT4hY5|Kx4?nqBK!(58
zx){&7K8O~?!}WHoOo?ZB4*`>}!5^+V3y;l;kHdrKk!v6)FCyTsLP<nVRDHXF^R(+9
zufHA)k9<gk#wY}bnazz!{Utb__YqdGOH=NZDTOYO=)E#IXC-wfy=TL?&E35!$!?c1
zdS}2EeTS0}04CA<Wpc)Tc@>+0$M+TFacTjTM0=c^gPC?LS<8rrT-Ks45J_~_BIm3o
zBC}Ru%P-XcMxxClr?Xa-WUVn9=#dZ0ka};S<aS@q8X5rioL`W8sD<`Pbo=C-wJz4x
z1z}MOSR@*YoU_iwDr}EUEntyoEON#kTig;42A$IhKlP$aG2oHtMVXwlp33l9VH<5~
z0gFW2Mh?%75eL!Kr6@+OMG+ikX-u;oOW`Nzyq%3sIn5}AMo9EDBj;eY{HxQ95CA68
z(~O)k%{H(J_~hn-#-3V0CDA@1=WHa_)SH6|rx|sDNTR11IXoSia8_IgSLfzJj&nBA
z0`%s-f_g(Ov`wOWL(bXkVih(ks0Az%jYZDc;$jsxE2sr55{*S}+^h&WTZumPq@Wn!
zNc5y2=U_weCME^7fJLHBBNubGmz)&w@I1yp-uine9;u8+v4vbJGs4-<25Buuc;aj2
zk3fHvVrYS6_<B?b=V0p~);?L#08<NCB-&bX&Y8rTI$S5*%TgDJBsyHl#X@@PsZ+xZ
z^a5_LxqeV8yIwccs#x?yoQg$W^LuyrWyy~f#UoYmsBzm)*85mEt9$bOuVJl^MMrJ~
zJZOW5|A&X_i(?VDvH2^`RwEyUM0Rcj<9JpZD?R}uvU0f$g!&Blm+|=+4g;Vda^hx`
ztpA{$U;hytv;IB4{QAQ<X8pzf{Q6NGvpxlI6aOPP7=lhwM4t0z+dYi>dr-f8O#Qhy
zz8f}`73JfEfL)Hd>M`}-ELQ3rkY7-mFFyxz(|~`{nEI#7lv)URJC-lM6mpf2Kf|b>
z)mWx*p~9PuF${eYF2+r&9gHNTofjvH%HmjY?j}`n-3qAar?J#R43X%lB<JjOu_jCv
zlVVW|SR@*YoRKPclj<xYPn{+x1}GApCdfIvs65%)IjLFH0v3rji=2@qMm}c7sB<<O
zai6sO6TUPaQMpfA*iv>v7Uy=B#knUf#d?$ZaUhQp5bcu;e*zW4;qk`sCvlLviH&Dx
zh;nwbdGxU`*Ha5^kmx>=)2=UeUn2Q8HhnXjyah#xv&U_yuy~;s8Y0mRkqb+*DRRys
z<kW*pF<_AB!6oOsgUSUDF13I~qU|AP3~t<C6%VvNf?4Y9Wdmz#In~qkMR^13Uhqvi
zuzECah2KVrf(A*3Z=*}eMVxa9K0zMOkILLViDKiP1a$#PqVqVp5H8WK;Aq{BLd61j
zRS8e{Vt$>3admTYJsycT3AVejGToHlAtO?=m#xJ{>oc;K-)^LSihUy(3?Ui5gMA|x
zj#Q*Rje~g5>11P5k1xdlL!!r*oYO_+g2$Iyz#`G(OU~T*$^*5mQyN0Ss*xkGwu(>6
zd<qYD{++f*l+(@j-{c5U7gmty5h90o)50=DSSw=@2Wj{i_SlpH5{ceplXH5gJL#n?
zV<>kiYbG4yQkD<^CeeFra>gEeADe*tCwlY~&yP}Ld7u_hNwoXPIs09#-3YqeT@&|C
z%%oV<0v3tJA{TQX*R*4lQrPmk&+qR9mrIK9ZZDgh@(PAhXo5t0mz?uX>i%oqB?N#;
zw0FrF-aU^^6zpAU0hL61gq+joVqI8}cc}#|5{*S}67POytatm_<kZ_?ilGe>y&Wd!
z3{V+;|8PO}QVUol+Fo*=y*I$Xk<Xe|28Zv$A)X)K%~~TgaD$5Pdd5PHMX~UlC6Wo`
zZ55`-*Zz**&3a~L96OI0k`{t^yu5(mpA&F-MP03gKlp<N<$Z!Pto%J#81)aM?ptH(
zFApen7V4e}=F7i;W7aQ+B1E!#%T+l3Hyl4Vrk?MtA4RTubxi%^z}OMO9x|d|+MN$5
zzPC2ymzR05{c}?E{nQzmVsJKz&dB7P15}<YBlDMfvP*}*ZUy|McZ}2m7Kt7>a_%ng
zQb<Lsidr9J=5@{|{sb8}A3C=x`HeM^x@d(&XIyf=kmTE9Cr#uDZ&&AI8@H>e0zeXd
zADEnzArNlUmgLfyyBEj@s>-gHe&gmZwSh^ZZ~l@C>$}z2+o)Kz8v?C&*!0LCn_K%v
zTM#yz-CO!|drQAg_4mNRqeMZoB*ULag>Zgnh~Sf^IRfVvk@3hIh)f6|ljt-@&Pa0?
zu!+giT)xMQh@loxNp!@J(|bmp^1pz#jXCXH=r(inL>Xn$W~hZ`NOUvgbTcK+MT9IY
zVyFT<5*;z*oPz|K@Wy_=VG~CTwSh^ZBZeF{SXaRVc@cBKxtI;T;dKZboG?~$*CB4$
ze4K+zK(tMwuS3Y$5&zgr5WE#%6bkAs6@vHVCfwN1CfpMc#@_o^pF@6{i_cNSwwdRi
z#PLDYZ$X|i>rtipQ8!@J^WB+^$Kh>Wxtzs&>%;8!)ESLp=nRR@Xylwrs61IltBh6V
zGFqh(pVR^ti4Gic&WMZk&_qEvDHgSWMWV6Dx%X*hkHZvMR8`!%Y5}~Fxfe$z%5m7%
z1er3wnOvr<G%_W1(ISb?l;j*Vqn`~FW<J#bMxxCpr_Fcwy13RECH9niF-if7MDNAO
zIftk_X_8`pb4jW)m;Ne^oh~5&Ornz%IU`BEi%m?Hr1Cv#1Oc^xN}_vC&U;F_iPLj4
zijgm(P!Z?dY-8#T6U6{ZqBl(BoXe;T1HV^LWKj!PB-%i7o`E;ew*R1Q-aBwG@;z*4
zY9lEIU=nR4Ip=aJ!^o!#GLl-rBGE>Y%QNyzc}6<#b({HBLCsJL&5-D3$hpnnY4#Na
zoiN#t8U8C_jDDI;6(Ex6WKYh)`AL#}K2R>%R~p*`Y6Fu*Cwp?<)9h@vuZmTjT<=$S
z-?D1t%XE(OKDG+i|G6NaPz$Y*XrGXCpY!4uE$;&~ua%v{M4vh;C<ZtZ9Tnu9_fr|B
zg^DM*^2_&0-3mH)C5lmM0gFVNM$W;SCs;)VVNnZMBpQpHcSE2Zt)*lx+z$?&{Q%pT
zy0a7mD2eVYIp=CBqqDOMGLTxpBGCqtb3W)|71mj50gFUqksIIH2XtqzVH;C-mSO-U
z(VZpde2B^gk1Vx-MWPKP=X}`3np=?Ls0Az%jYV#JXTPF5doA0Ty0a7mD2eVYIp;bm
z7d*1m0v3rjkeu@o7pt(&QVUol8jIZc&OV6FMq;6nuY%@MdyaFicUx~N$ko(B>m<5$
za$f!nJD5R*=1-~skwoWDa?XtensBq6pDQNLpVS5>iO!$oVq>qbm_MgmI)6SyH$|L}
zve_v&D3k&`iQb@)b3R7he{F+82mq7l4GKA9gYt1Uf#{p?R$RVgj3i1eppxh@BZoVX
zlJhp9<9dVgwaFso6K<>P3yKtKp;Z#yDmgDwA`$14MCCL*12-oo{58`N7&J;Tz>w(e
zIyvViD#H;Iz6&v_Bd7%|5^WMW+!+!_T#D949!7yDn60yd2n*-m*vgySTvHcqk?74e
zxmX1Esjxr5lU2nhD%t^Peqsk~qXQ@gAQC-4$T_!A84l<wXiTUDEE4Sia=5W24(Om=
zm=g`9kp;tFrz6f9Au)2st!$NJ2HA;CeuO4d49$=XKZ*+BoZF}jliyR2$<zWCi8h&>
zXYykJuMI6!?k@*>#(x9VFrLIP{&u(h>kDe1T4<j{w@=P(KVIy7il9?3CKLk-iC#>|
zId@PQ9w}@)Pc2}PXp6{s9zpVq#!H+}6M1U0C<Z7JZ5BD_2$f-0VH<dA0gFVNMJ~^*
z(%e?^-`T{}_E8L&B-%c5&Ye_-eT8i$sRb+&Z6CQ<v5tMZEmks5>7Nz5ca7Z7nvnAu
zwl%e(6azSkHk6$6St=K7D7An^q75ZCnW1Nmd_^027u%ZJP>KPZL>o%Zxtq!`w6Ogu
zwSYyU4JDUnXsPMZ2ehG|V_Q=jN-=<wXhX?4_fWZDL#YKU5^X5C$qYSf<Utr38UCi2
zoBB@>;|^mCiG{yz78!mRC-ki@?js(5)wtEAoX@*<9w{i-Pz!dFXgkSyOJ-Tb`2tbt
zx-%wAzp`Xf3@{{m$t368OJ%sOuqBgPz#`Emk;6;S?dZLJeehf0xMY68hsoo7k*&PR
zC6l^ni$pJ(<YHysk~vK||3UP^F3+g~P!hd-l5@U9pkvuyX5aR6FV8=K-i}fmm?Zio
zYjVz)i3tZ!_>%RcdlG5^i$pt^oO7RxHQ~GelVVW|SR@*YTx^;iERLA*)^-OD`L4FN
zW`3K)c-9Dsv1TF*7V2=Szz7oUaB>bNKYl41OC2VJ@m`Gk$Rxi<Rff|M>Cw9Hpco|r
za7l*0iwfZ!WWRrP(@h8flju!1Ib+j}bRgq8;j7&Fme;MIxhrWdwSY>Z$AX;m)i;Gj
zEntyoEOO?!%EOTKv+!-|duZIeLnOPo|AR^lE=g{1bE%9|IG4&=%)9ouCVGfAPn~rr
z1|vyy)*<J7jmiaQ9clrKM0c2+gN!R!&li+bsRb+&jYZB)szw@nJkK`~2Rq+m={3cG
zPNI8F&Uu8&1^1d-z#`F>l5-w)u}Vq`xp77<V3BAna^rjb#F$<`#>S=|Yl;D#ME9DU
z^9?E&+-qt9i$q&W&cW&{SZxLMnp(gj(OBfh_xk9VUSo|vmR?f~=p?$=<Qz<%H_>Zq
z0gFUiO3p#{6|AiV^_p71BGFjn#`pUBdA)X!RHd!1g4&`M+9J_yk#pOM#~dW)WAP-#
zfI^}@NzOs)dJ~?c7O+UPMdV_!+|-Vjb9?duOX0^s3Y_9OIx~9q+35HON!U6@M~Q+q
zN%V7ca*^R5;GBa*@~^H)gaAB=UXjQdD-vd{II6G}iCRD<(T*bLU@pAr4I6cVNTN4v
z<YF;*!=^`I6MT}w1~fXsCOTH0TXoLGi{ZJoi6dtDWyBD+Z`wfW!ax#jAUOxaq@QpW
zwvbQ_U?kdq<lNBr_Na09mDwMn!}Dl9f3i&KN2rch9D~es2MBzKFYla=V2T=>CifN1
z{H=%a#B)aW?Hl*u=a13sC;?$U$?%h?5H1#vRm7&Jp2D%pU7f>BJ&QL^cAfDNB2o;9
zB>EDKoP)+BI19TvrxvhCv~$VDDs&9pfY!VVa+rQBwowdtB-%D|4*Ds!6?UCVEntyo
z+sNhF=3d%9P57xVZ7Bvk5^Wnf=f9|o)w3|aQ43fk+BR|+(RR2@KhMH$mNznfLinj|
zqZsf=v~A>^pHdmN73Mc;0gFW2MlR1b?1^zDjqbz3$*;7L{fzDDOL#NSNDn`wX>am^
zle#dFM5hOG&ND>hFGm)(<DweCNOW(>{r{F8o~4oho9TgoFrP%H2XYgqho7_UsY8ik
zKqS$jM9%pIl?x7YY5|KxJC|JE6ue)D`E!Jy+BS*-k3`!>&Uv271&2AcfJLHhBbR5}
z1KPG12tT!L6ayZKwvC+gB9#mF8?}H%qHQCWHwC|<ZTltRr?!n^z$4MNk#l}U<%0c2
zEntyo+sNhF_8@GF3?rkxVS2zeW=wj>?j!ueNMF%N3W>+ufACk+!=c>X<F5ZQ_8uoF
zyr;I>Mv3o02Du4zoiG1=w2e4s{cp$A2Lt#XWIw(jH<B;^-;g^Q=T00`zZO>UOISA)
z<;yRD+<dgXV@&-Qij}-;d~Qj;d=HMl1bb$e=GV`|@e0_}Ri0nJ2e=I(rLG)P|I4^i
z=fR$>)AQwb;`m9_FRIF~zZ&|F0l#BR{n<GF1MGSGjC}bmIA;Bd>iqh(IA;B_nfdk0
zam@M?XXV$|)hIOzdp<oozkUhiZh+suJ*NJ@aQr8X!T09o%fE_a*8g@ve*F`W=R4Qs
z$K}`m4Yo8wmfu#6;mp3D4O7$_)U7q@`F&7$PRsAaj^VfS^!M@p41pMRe$Dy9$#%wM
z`>PSijZzE~ghXE@k#k<6GA7%E_i_2{tl8aPux<rl^zA5W0gFUWHgd*qf%C<}CRnSS
z|4aM{7Sw#`+#7{K<BdY<q7@Ropppyf_y0<q-w=7iySMq+#=F;40U(LKnMlt0ErBL{
z_c|Xa_i{kcc)5z&z$DQx2ap^4CN17~!n@ZsL3-qOY>vaVbh6<(g~LTL;F9PsL?-9_
zp2`@miM|k---|f$a8V0bBzm~WxeuyWqcMIDa;^SWWWJi!5cnDX5CE>QLdU6}?IV}L
z?gL-Xf?xk~UZw?8zSBS{v`C`gX&~od^1Z>uEX~iobUDd)0TTkiB>G~OoN+PxM>YWm
zP53>plRAi6Kqb)*BIi126S}TnX}}&Pcf%8|_;0oaS0K&Jn(&o_pF?4kQotq|{sk(8
zbN)nKeEH}#`4?mE9c&t!y=ySu6MKkD1mKeBuk|EnNA#DEJ_m`B=TYES^#a3Ws`cMU
z!LO*`Q7pdX?v_}%Dt$Xz2Qwpmr)KJ2px%q3H%ubmSC{?bO~l5@eAyZ~DB!%p9!wbs
zl!BEcIuOV?f2QuFFSi_1AP@q;Bsvht8G-N@Hi1Bx@a2|C1A$sVCDDOE&iSj0MZe{K
zLBst$vq`b21uPPcMb1Ie7rTB_5Eiw7MWV6DxdGaaaWd|XZ1#pQyKj-<dX?=?y-H9F
z4Uy<of}Ha|R4#axpcb%5w9(|8zq?r1P4o?3lRA@Hz#`FD<eY!FSQCCB;-pyA0v3tJ
zBIo?m#VTxIs0Az%jYV$Uz{n6?%7OVMitNDnhOtS-6is0%j$&4sJ4w#92mhA0lU#WT
zr=I@a&$~e1iM<IIS<Fb8lm~Il{okd&{Qbncu&4So>QBJ>!))%!FUIkQaPSB~%z9L*
zmr?fzqkh%)x398vGyFb!bwTr@#zjqyO^e%b0PQ}Mzs3G-o`c^xiz`(-3;g!Mbnn2v
z3?(jFgzv{KLEV|#)rrgX-|U*V?#%UAe$;Xt&p`j@t?Em4QW!tzinVjjEs+Qq^*;-m
z_$9lv>uh|=@PV5Znvf4g;6eVqB{c(|3Vc}SeU^f!E|=dTeCTW*v!)+^?JBCSS07NN
z>S1*k_!q$k)hu*2s_Lu{pyo6w--$AaePRzJuea_(x!7j82W3#b2Y;d@sJ8i<eC6sY
zU%xM??gAfFUl;y4DV3i!rBWUzWgE(<+T~~K@A9+t4}uS>uli}#W8kCeIVt}kWi-H=
zIw_k`ma5JGwK7s;1*v;Num{fC6I>UpRQpf{)%$`6QQn67Qgu&|^527GRJ|-^b%^{4
zQtp!SGL-ODxF5Ei68-@GV8=z^gX-Pk9`Nsz`VXT%sP0G2OjR0rIb5!$NBVs;)qL<X
z)dnf|q714FBlOIVBka+iB5bQT%JMBJgK8P-gX*~`%Wx4b>@K<s{HKaOTohH`E~3nH
z!iS5=Zz(2DSt<FIWwhs$WtW!)ReTx|9!D8fPfg=lD@OkR#K<2Bz7i`{OUv&<&D*Ba
zZ--}a>>fZFRo&IJ=lxQ?Fq3EhF_ZI4M-5B<o2C}3rHFLzXp0<$FdKaMgAc#Q1Pb7<
zWy}=42V~|%R1LoGf0{Zw%yUuq=;jEIiru5r5cdH@w3Zw~cn0u2zxt>f6D^=>-J^%)
zXn}il>NK9);T~OrnHNwg_oxN)FQA6qqX(*a^lKdL82vVWziG$l6H-2f(o%m!>|5$D
z;A5)I`j}f2R3YCSJFaGhAG9mgZQ(zmygMB9RjThqzKrr`k#C{=b%Zr%NB8(ERWeHc
zK$K^Pqda@L)LbJqAD5atq~`Nd^VMiSw7wl3Mfqdle-r%>_`gc|`J#6OD%Dqui2389
z^TEHTn8?=@6ZsRxtUn^<7o~h&%9o}5doeaoDpW$5xRi5BSW_>2i<IqBvsw7vQtp$Q
zjPRFAd01+$7yec$?=E>Oa2^o;n^OKj%4bXHf!~xg<LqCB_mz^LTe=oyLn$q3E2aHw
zN@@RAsX3>VXuZM@NqI=htE9ZKls4Zk{5_)kpy+-}YJMcTzYzX+Qobr>pp06vGPXFo
z>}>E0g<o36wz{UVJ|*SwG)lf#_zzE86RK1<34f=QUy`$r2>;TwJvjU4X+#LeQs66M
z)UAyX?Zg=CTVw3q>KJ>sMe6rRxnJrBrG8Xu-Y?}1G1_*U@OP9G?F;2Zd#Idf-zld*
zpDd>jpD*7Mu2e6V6Z!8VgFndwJ|3scoH%9b<FtQwoH+aBY(~mU<3u|w{Pl5Kcx#+E
zcT3F!aoX@r;eR0fv%>#I%D)P}uY&kx6>M=<1?7(yzDdf{q~;9acS_kMH7VhTrF^f{
zd|3FKq`XtgFICX~M+E=z3flIQ3flH7Ir}FmU$0<~il(#ms_E>@yy?_BNoqDvzZRa^
zE&M(yGt+6|rNSQ;{(9kW75;AF9}xbV!v8?{XNCWb@P8HFSIHL3D%tuh;g7Fm>rItx
z{j^F(^%+vXQ_3!>PgULldxk67i}y<Xho!tpaPAcTOHw`}HIEDb6DfZsHGdNRbt#Lg
z*m_kJEtx0fNm9N|>emUsy^681w~8&ECp8yV(av{Ed9~Dhtm;0<+)+i(d_ig+68<~F
zKPmk4!oMv1--Qp&AWnP+Tc0z72=z0F&>}VM!fzISxA6Of&j^31@IS4l{lBgz!YkE8
zQ#0wk;+c%788ewt=g;KX#+e-b<ulof)1{_k=5VA^oja2mvQN%lBxf&^vmcc5<5GTl
zCR@2z_^(O%T`8YJxuup%(J!qI>o#Qd-^$S;b&ho>_DR>y<+(%nw)wkp)Ve?)z1R98
z{wUN7$MNVI^#SW^_)A)^9Iuc5&3X(g*q`cn^h@iA^&RY_{-%#2U$&mWdRDwppZg|S
zC|2`N;L+tXzAr~J<mj3i%fhc)#p=ZDxu+nxLXLhJdER;ke+B0(ePq21%o6oM_sFuJ
z!_jT^x`kr<S6HKe>K@Ise~b0=YYqC`DfWM3rT)(*9vxC^?7v}MD_*9LHUp(xJ=LO*
zdTiT@t4rRlj|T0qRiQ5G&`0mL%kYOrPT!@EZpFD7>eq+#(HHD$Yo>Z(K96+&W~txm
zBUKulXLDC-ssF_0(^gNRwA6D_z9cn&MCrq~pW!M&`DC9SLWy-)WJ-mPOF3K0xl%6h
zVSA}gFlu!DUa85Iw)&*h+=|jxpU$53>h;-KK^r6MgGbL-9G`<y9zt1XU5WBL7=6~?
zi1JtJW|Zex_Xyvn*86X;+SEJ!pRn%3_dh&?J@aAzE!JFhyZ_&<Z>jJ3@3x*+Py6q+
zR;u6mzis^j{NpHtfgf2fsj9%wtv{mXMU=t7Z>(3<>cF2Z%Q`FYcPnD`241(;qZOZR
zS?>x&?1=S#)I_Y0N_mHr_ey!6l;4o@`%?alC3Npp>(#vAo%n6==HN5xs9F&`!Cq($
z1{>`*>qEg)>|%98aD%<lIubn7UT-}RJj<S|ej40sZ?)`D(%xk)51j{@Euj(neCzwx
zd+dYOO`*fk{cPw%_EGiu&=>4OsJ|0e81zyFdNE>G2<A)bq%h;2XXmPQ;oqT^?}n><
z_gTv#3w<@})X3XWu8HjQ9kou4>_+{2B1zwTsh=<PC&KdUe9cnMRaZxTrM6n3=+Atw
zTCwO8%Ce7-zUW&n^2<g3K5I$zRo`l<SuHgipxff_5QJS~$u9g2k+|9;GJ8a(+dVt2
z=wbgZRf)4l)mw`m^&eG>ioS)KR@CfLrxiVpnl(jF`ujw;Pjm+bf0x<{nM<Vp5~;t;
z#e7FmbzrVd5A0Is7tId5Uu51dGS@<;J@9d{>NcsrP3k`*x(n^!7yWzSUa7xV>f7vp
z6g{E7B4-!N*_C#z_!$+kXBK}=t+eMAKOy|%fupLS_=iA#Tk+E<Id*OKy5eU8>+L<o
zcdCT6_^2R1D#+gz%!FE3c6l(Nwn({4%1$Z!QQl{blwBG8p=kY3w0;V$7XN+LXUp!#
z*{`5{LC(G)XMZbaUy+(uq~;$|lThC+d)S{)PYLob%Hpu+_rhD#;>wRmc)QPUF)E5J
zj($SToJRQ*r=1X*Ykw|wd9XrcDnw?k{ngk<Lp6|W56o51#y%gq#txQ$Idr96T>fBa
zzDUj&$rB;-e5hG!nx$qrYNmzf+VjdU58fzabfdktJg#oEH%PgyoGtDtpB-Lp1p|v9
z`A*bt5QGha&>@&dME8h&-Hf<8Vt;hT385qQ?NZ(|<6-|ja`qnkVbt7XKO*I0Qhrlp
zzBS`J;Uo4BA$i1pP7wY$<MQAU`|l|CNLzcPt!}h+o$rVpuIAb4)h~zp#Hu4UN9~9`
z2lay@KPd8-K)wZ-^&-zPJz{fAkJ!tlW`mTwsy`Z<t1hUX9l6iGwt8OVGC{aZ5Z(`j
z_P`PQ7PNK5z7ypxb#L|Qk!!U#)bD3r6FDlqJ1TwuxafXdbZ--DkJ_9y4=ewyuRyYR
z7G{>%uuDy!^`DW?2u>-oekInfuzDNHV%4n{;eDRpMHZ=g^%s=0)K05iwW~gqZ&O_;
zn^Xfz*1ucbYR$85mGTiOpO?~Su^wmeX_vA~%6Ch7tCWvO`Mi{?aa}jh>Xz~{DIb;6
z?_>R^toyC$c8h(z{bl>R_7ChQ?U(F3eH;Co1J4H{!G=(C_=@nZ$kVtjV_^lsqNSd)
zeu(mG_8iMbzgSm->&?~nV|J_WV&D6GpY*-ttMo7QukwG&{~!LJ`Cs<`!(S43YhY>M
zvcTcMCjy@fd_8bpa5(sh;9bF^!RLa%4_cwJ(45d^p_@aGhJGCSUC0U_7fyx`hMx#O
z7yesVMPiZq$nwb6$n}xWM2<%Mqi8<whxdDM%Pae1sdI#%Dfa5>sQjhctcc6#tNwi5
z1Xj_pc<Xp8DX)!M-!r(%XPu4v4L;nL^NBaO&f+gQVYlSNcyrD5VdQ<-u?Q?~er-&3
z5A`KaRjZSk-hBgWE;^7-W-^P`4_uHO7)+%%^bVZ2sJpKZe?X{v{lNBQ`hsNo4Mdfv
zcX}!_sQNQqsdQg&r`monGnnjGn>*i`>>5-nhXzyK$;^4#M!*av)A*xHp0-+f;6Pt*
zS7NX?H86R@?WuH9t#40sOJg00&h_1DOJX3|=h3Z0$@D=S7-*^=2dclluNU3JDQ(%J
z_EcXVOha>-MeC9S$#id*THPxZiS)s9m#9@kgM+Do)ybaTfnJKKe()I+S=-q=m{cpF
zcR>P7dpZfSt+%ri3NC>dEbT~nhth^xmmCD1THlo#*p%o`s*Y5uj|Wn-W?-mat+^=K
zH8hxPPxbdF2D;V0<ltWVv0r?I5lMKBF6zRtiI3fLB6{F};G!L|F1b3@HPjCmNXx0N
zj)Mo1YI|~U`(R>lDASR=Xi#nG?K-dhU|;V*cQU=Y7e---Hf~f<+&+*vklCLaRPBia
zgF_gDZOKIU7K~p;xQ*y@x;N3M5Lp<Dfu5AE&O2I}$t3$b`wq(K4ZWGca~CUj5H@#p
z4W-k`fvzM?)|ji)i3@QnHw(7;Kym<<$N)&k5)z*9z8hmbz3I$gM=xBN*6#1_%^c`U
z98|pwwSh#RXdw!_)L`!cMeo7e1N42Db}?=ZClD&#DM-*CJqc})7c$$11_pue#V)5t
zZx_tnJT$m+5I3GXF<MBl*#Lu|T;9{fSRUx@OQy4`s}I6}-maW_2A)=_F7%U@W#FOy
z9le>}&c0+$Mx#g=Y)kefE)p)2JMXqeF`Vk`?du&pm^-^}sJA<J)ZUlKWMne3x0BUN
zuwcCRtv6KNDD!6RxS1glyCs2f9TYY@12G>Nbx9?&_{>Z)oi$)%Vj!^(`G(jNp3pb=
z-KmukIX$m5zn)1)S76SW=jAYahRMy9ll);yx)oYh4mb*&gYBt-!E~xm3r}2!5K-;>
zlU?U!keJeg!j4gA+d8=@Z%$}2H{|sJ(sC+2xGl+2ou2GFpxS%WU46X=B*m#Sk_RtL
z9Mt?~KJ(D*s$_x(+p-nQPwm>fceS1gGS*Fs^I%7!Zz#DDp|%|P0eR@u&b@mVV;*3t
zAn=itQ|Bd-fVz?gWR`F^He!*$*q}25NYh?q??kppU6@(4HkIzrC|70`{xlvENMCB-
zwq$0g55oIX7kU~U`;jBNVIZ;vGAlCI8ctBvkv<4p#4siCwy`&pp_rE$F&QMgB26&|
zu~VLB&9HID#jA41ESJZ<(UYMxt6fF5osk6Wt^nG3Qj;CIoSw?SHxhPZ7mV##NcV2W
z`YLIB4OiFG5k#2&<JJ}t6$yp3mQ%tI^bW#5-I<-egZtI;EooV1*7qOiOEQ<s%wL@x
zO!W3;P90v--nh7_eMwtG^V*h{hUWIAYZ}^Cw=QmIY-wBE(zc{+^^(?=BXpVMAX)S<
z3ym2)e?D^l{#1A4Mavrbv#en;)|o!618Py1EHZnus|Z74%)%nEq*s<xQ+xMrM{cI~
z6TMhn8?kis^|1<Rf9=pf*SSsE8m=(1G|~0q=jEp!(E5v2mR+LUyhbVQNG@eOTANPw
zyEPkoyV9vls%LOf`}X~b^Z_-tVv&ooN|rh063;mAP;~Xd+P(xHD54|S2VrhY2&#@m
z8V*ppjg{$rV!o_Z<Eu2ldUh<CP9T%R12B9eRzrjW!$+^ds}gBhhL=yg4v%wbQ_eTd
z+NI68nx#2*8J2l>tFyMZ4^vHC%tq8&<b27Y>yjx9efpsC)_<K@F;9mwZaQ%7UG8oH
z#+lQSYq2%Qw&mDFj_u5`T{*Tp$0l=ZPmW#OXz)g8EM8*NH_2`+HE^!sjm0LvRGopb
zSF5n$N+t%7sM3Q6QOah4xlwIMWCqt`6Lit$9<_a_Gb7KG)!I}a_C-qXdQu1Wt~q}w
z!If2cyC2b&9Z)u}OGK>9^sD9B4bwQkEynoBX4%}5DkEHsz8OAV+$yFZCJ$m4XUO1=
znHy@%tq3&Z2r;|2UA9`-?P2>yZ5e5?y(8tWt`yUWcztHmP+#BX^qT$ykaTBr28$1p
z_XWvKvRKe{sSE>KyqL;h@Yr3?FXMY`M8aYt6c!t?u-FKO#YQwNMmPw#x3?UJzQhQU
zB}R}eF@j`?F?W_2v9ZLMHcOV}oVvtt{1PL&ml)x_#OT!$qgP9eUM(?twZ!Pv5+lf)
z4Evi5`<o2=n+*G#4Evi5`<o2=n+*G#4Evkfu)1PFN?_|fKKV8oJ!&#~)MWIi$>>p&
z(W54#N6ki$nvEVc8$D_^dem(6sM+XIv(ckwqesm~kD84UX*TR{HtcUU>~A*gZ#L|2
zHtb(&*uQi!(%~S+Vs&qSdy2cgwOu`$LGsqjYFtsdC-r7$Q;I7gg)to^vv^Y;7u)AA
za<9O7DT)POuExQ0Jk*&3xERHyPg+)bu2y-+7(7k}nS0<}gXBUed66t8+JLpVD#ez`
zwNo}=`r=>1u1*bc_HOJQzyg8gK8u;FNpK~=#h^?+Z`;cBHg5hcHAZ!*F{(?AQC(_`
z>QZA=ml~tG)EL#J#;7heMs;bYm+YI|TMfC(`rPbYYK-^NZoO2R1{lM>)EM?<#;`9l
z!giU_!DU7Vml+*gX5cR~I=IZ};4-6w%Zv^#Gdj4e6BG2nhU5iFcW}pEDtBP+W_V{q
zUj^&U?YK(sGBnxaZUmH0?|L_*RSnPS%dw<fk?Sipvt~=8H!T+ti=|wmcBJ~SwQ1kj
z#Ho=?_h?1#8*)c$(rK(l%O}3z9~VQ*j1gOA%+O`VP%Sfts>K+p7GtPdjG<~VhN{IF
zsup9YT8yD;F@~xIL&Zs9+>{t+bBi&AEyfVG7@4QV=vRx;uNI?UEk?gujefNn{c1J(
z)oS#s)#z8N(XUpcU#&*JT8$8FHSBLS>~A&fZ#C?1HSBLS>~A&fZ!_#~Gwg3O>~Ayd
zZ!_#~Gwg3O>~AydZ!_#~Gwg3O>~AydZ!_#~Gwg3O>~AydPZ;(ma4n?oN$u!OUO0ZW
zOc;Gi7=20@eM%U8N*H}g7=20@eM%U8N*H}g7=20@eM%U8N*H}g7=7wA`qXKRNvC0d
zr(u7mVSlG#f2U!8r(u7mVSlG#f2U!8r(u7mVSlG#f2U!8r(u7WVSkrlf0to@mtlXG
zVSkrlf0to@mtlXGVSkrlf0to@mtlXGVSkrlKd!8@*REZL{oRKB-G=?$hW*`!{oRKB
z-G=?$hW*`!{oRKB-G=?$hW*`!{oRKBxG9#kx!bV6+ps@r*q=1)Pa5_o4f~UZ{Yk_A
zB(8h*C%GTO?P9t9ki(t5-MG^s?CHtgefx3qE0I~1O7q%l8*bRIRvT1@+NM_F0*;le
zqew^ZU|$li^Wv&D#|kW`tKRvXd7v9NJT@hh-AUZ0)p!5(8OjhT!+l+LCj}n2)iS&V
zrp4N^&?fPGW5C@?t-?Kxly{Q5Jh_pc!M!YZRnA^l^O9<O?Uq#Uz#uLP+#6f&5q6Z?
z7VO|OBksuPHORXWK5hX@8bOdWf*@%GLDC3<q!9#3BM9J|Y!D=kAi&d#Y<-Ur1U*I&
z^cX?VV+28u5d=L(5cC*9++*0^W7ywg*xzH=-(%R{W7yx*oxP!?w?p3TB@Aw=OTrD?
za9;jqFWr^rR6bCPY{4`0G@sVRR;mpCCGpO7C*C(dh!??E<4i(bsCw0a+J`@Ww*|*Z
zkr{wS0-s*I6*~aQvr(T0zZ#z|{3(<5sJ#G3l<tM@0G_(;$5EF$PwhoWC(wpkV4km4
zYt%*RfZIX_@8xb2Z9E8F_{M1L!2o3Oj(p^+hi^Xowf!&dvm$@_$X_-I*YL*L?dUI_
zs{up2aMG*0x9{D!joLrCdczfwO|Lki{lD(B8vC~X{+x~1ggdOpb!sEzYn7ny^V*sD
zI^~{qZa$ootyAkTbx%TnYt<6ff;XBMDyy+`@5aqUvl_3z<mpR3^$x4?{`cPJbnLbo
zd($^2Z}0l$m9@}g8&>1~D>|?D@500Q$YWP*yhd8AKbHP*Ec@~22X$|#%iiR0zp>le
zV>PDVab>^NSh=g=D%V%%c&*HQ-RtF+eK#h<9gkjVHB#p<o2<sbfYpEexjE~1U2mOh
zB3X?~hbsC`QkP!&>+80lSD)VYv2B09<XOimdhwj1i(lJu?7d+8U6}2K)@DEG>C#QL
z=;Hy2saiGKdD6Z^SFY+4?47xGX1@N~j<x%(#?by7ZYTr&#+9$_c%|oaNvrYXJ%8J+
zM<F+E<MA?E7hU(g!&`3JzZE@>{A2h3Y`wkn?H$(QV;KV-&nX>O^QcSfs9z_s-X$@6
z5@yDBwS$onxpZ^g&?|>ad#q!M+0#Y;0OsY3`-(0k_Q4wh17~h8-IT>?dSg3tGiR$B
z0$Q50zJzlK&mX&9-1ppJt0=Mk_)GrTEBq8_dM34FzNazI`#@n^)8N&0Lzn@(>xSC)
z9)IrKuJF!(_R{x6tX1X=X;p2inSOYiZu4Z!nh#%{+&XymWqXNm+1?XTLp`D#-uc(<
zR^vZ=FWbxVLB!cVd;i#PMHXG>T6;`mbOw5T5HXfu&lhIivFJMLPi)^})d&k^4!4Pv
zVV`H&qU)$zi|qC!@}1Q<c(qv7IB@mX&l9d}vpT$!Gby}Ne0tIwkC681W_Yw0ISx7a
zZJW`mhrp34-E>pmWEMBUpG%Q>7OBPbYkjV5`j+j7cRqUMa?A@4!)iRdec`2#Ut^UF
zUVUjN{e0|Ju0qCkt*r92OE=B!y6<Y*sd2n|uYI<lEuh>}A7wVYa`$6b=pI=m`#LvV
z@jqLuucN#bIpAgKkelB^37zLcZl(xz!&Ar@C3$nNBq=M4I};<>c@yD^)W;|-8xyr<
zUHMU5k{2f>=b2GcWQ<M`+i-nQWcZ`36B=A$+;g$@vOXqJ4r0YjV-D+;a|l^m*LENx
zncY<6jLuJQ<2<lh{(3m_!IwJe!;=)(qTtRy?(4k1P7PjN+1assp<)#Nc>5Lo)!RIs
zS1!Q(h;^Wi?Pw|6eq<A@VN0rLwe)n5@n1!rIj~RWLsn+)T4aYl{2OayR-&3~bpq??
zMwEl#*-`=;YF6${3g_u>_Pqxdskz>{u{)2f#2il|e<zYXFFTTy_=&6cLG&^SieHI~
zjkDzVcC^_KS?*Z0kGcQokum9omb;gkyAcxF(v^@Lz>&Gv0d^6QhHwVEra3ujdQXoY
z_dIL`vQ4@3Ytb6LGX(G8$+AdrOj7X4T2MVA&{>+(*)GyOILFnZ1D}hs2;0$L?$xLd
zt@@l6UhNR6e)yU_p{2djQ;rN|7v^M77ky&y7rQu$n^4D5gk+qt(+8gR4Tu$L`h<R)
zHC{3o!=B}8w%Ja;N6=bqTn%C}w}&)#oU_-WM~q31_c*PRZLqc*5<~1m)n?e;C7z_`
zbuUogz%kGmcnL;LB;`doq>*#F@lPGks9<a#R2Kt{v8W@y2S+)4HESZg&5*{doA6u*
zG8bk=$qunfX96{w5zslIZLq0iyX>mnm@nFi9(Ti<{W!xc$DQ|n9IKL5z)a&DEmSdj
zhpR~vyVDdRO8L%`8Pki}EvO-dmT#9kk1jH6r+47|pm=^2O78d1ll;X9@vaqiKqiSJ
z*f@7R$}=(Vx^bSK^5&r)J9s1JNoV6FMk_drva@nteg>FuuEo4Lm4K$qKHq7G_5A4Y
zWG0w*^##nfs&@3m8+q<^IIiezY?Z_Y{o-Z-WOmat=G<Bbok1A`W|MB}$GwclYb|Cr
z)CIT)w@}tyW#N)-;d1N53pc-G!zT`ft~t2y`|nfXFI~K6M|JbhuM9u6a^2tVJwDlO
z2TSL#2jo<jV0CXSl-nOJIaa~kM$#87kA;KN%ct9=<<-Gj+bW-J`>=`!YAvgLZnQQ~
zUR{cx@&$fnm6qZcKVu6^{WuqfP>run)repWN31Tb;ki=Ol}uw<-cS>%wFJGClI4qQ
z*hWoxLxf~{`BD*v9H2`5^cw;2>k4ZA>gFX&)-<kK+t9dVbz?*G>XmqPWNGWlhL%;U
zR<<^-YFXU6rVU=_Z=xz15j!(Xeg4#2>bN&}lN7JaWZxo1d#XIf;vBf5#22z`9wb@x
z)8e@`Wub6+ayEQ0cXsLQ(y*LApQnauqP4;DA^OLb+JmeeL6-yNBT^dx%IG0DC(PeM
z39!#Iig0%H%JOR4F0~^efB8`PNco73#uo(9i}KN{0?LLme|LBE#?n9tRo4U+G^g1i
zcbvktwjEc~;+7r6*QwYwv4vr2>4=n{jnzgtYO&FKYD!CMYGR{b458(?ifaon%xvdA
zzp|{FS)roxYRD`sAAQh9W%;!7YPS`1$+AoRA=nwx5#k0)I2iIF48m|$O)L~~ol`!f
z-Gf>TJ^KAvIkZN<h2bClp09lLC=B`0v@umRVFgoej*UJY{@iJMFOB^udNN)NE+73x
zZ1hFc^VB$uVnxVrp+k`K1>^WN9$5ZTZ1i`f70R!5OQ8v&KLY%vvV4S^D2}y3HE?7c
zo{U??**X|m9176Z(%De9$68z(&vxO@XzVB&s;Pm0q48=dM!IB7bEP#3<IVn*x(2aV
zF8fkB81YaJs{~cKqiC%!?xTfqJ7;%kX(&`vKKjp^k`kLnj<wOwd0rzGV}!G2>%NyS
z&UWNbL^@K8X*tGtqfOfmG9bb}L~&_2>_!AK0^+zdJ4o5)=+NxJG_RLl(?zK8ctrkU
zf3W;e%=3j|4t!x871jDBiZNt9cmT<zG+f>wqm=8g3wvn#_^N8S0C_HFZB{ln{N;zH
zGk6cp&UVQYsy2nHF?o>e@Eb`?a|j`fyuBa<5jId$eyF<q(A-jtI1gzd5b@tGKeQl(
z2{qB6g>xe$j;je9W2S3rYO-Udom&$-w6JFE=#P!Sa4vAdb}$TEv-1nXAX6keKwirn
zAdj!~CROavVk30N=+xBYbZTn6u{6xg#<dtdCeTW9HkR1IlB&=&EEVB!4SvEUc1ihS
z8ReQvFNm{IAxlVhs1LO<(Uc!LrKTb)xf0XwC`ROznwsfu9Oi2WA&PYf{mHMFI9S8b
zT#t-N052wT&0xTD2a#Hz7oT23M&k&EL&jlotv~M96Fcr>VqJ<RHX_3dMNk21R;U#7
z0^U4y3Vaa`LjcqM8u3N0gVJZ|LQULj*QjH=#v%TiEd44NS-*J+`q0*~L0Fm#LhT)l
z2wk$v^F>ZIH$P&Bwt79<<@RXTm~bgI!i8G{Ou2KAMavH*N=iJ@Y=elbEbjrI=>nfQ
zH#9?Bb0#c<T?m*O<V6M!KGMzUUM#q_>RBmmCM#Tz<(*=1>S?b<i?AZQQ@PY@zt?TQ
zHy(;GQn6r^AL^C%ut~7+doTQX3%4g7cID1=;=ra9Uc7Z*U&cEyctzRUuZZaXEB==}
zz;7v$@4y+&2b7&6?hdMP^^`jupR<0h)U`H`^v|_+GngH?U$GbE8r(VCjw{K{xbof$
zx(Qdbn?>+J|I4pof9GoD2(D}7$B)v0mAcg^Euiv#lfFvUSE+K(1?T1~YIVp}39piP
zw<mj@B?zDMzk(($*p$0xG#=>*k!eJ~^}l9Zr@{xg3&r1F^W^pQdly>c{a~}5TF5pc
znsc%{a6QEP6YiZDIll-p-bbl()f~w4Vnkna>nm~ZDqZD0anknyc}33WT8l*M0vu77
zSHm0Rs_i_S>4pz*uL?hPV*3V2?UU;`UM(KLl|HR^uccKj<o1glo89_eVDgTD*JmEd
t-L-$&o@Vinz837podDja80)2+f9NNrT198<J+;~?^`QFye#Us<{{sj(bRqx%

literal 0
HcmV?d00001

diff --git a/AddIn/deploy/DesignExpress.SolidWorksLink.dll b/AddIn/deploy/DesignExpress.SolidWorksLink.dll
new file mode 100644
index 0000000000000000000000000000000000000000..dc1e60deb84bc5ba38f545fb0e873167c6e8b29f
GIT binary patch
literal 30208
zcmeHwd3+qjm49{5On1+WW~82xCCeJwV|*YV61r^5#(-tXhrqXdfH}-a8p{JCwdffc
zgzzA<Kp<d<6OO=UIRe?hLN*~G2T8~Q<oa#$`@kmI-E4vbyO3Y<3%_iVCD{PM`F-E3
z?wKB029xaXzu(}gdiCnnt5>gHy?RyMBR22-fba<+{P_OqPeObFIepe}`p(HDs-tth
z7!^+jzc=>_%BJtl-FYCBOOD#skewP%4x~m#tbDRRowUbBl9`cY&(^-=ur-)&jzmK9
z9oE~{2{Cx1Dn6LL`7*b+UyIX{VKpqoC@>_L`$;k|sZd6+TB<IReNEz#Vq9x(D2`+e
zVdzsOv!u)@buc9aK@SM=2k`%Y_DKq{(ZjqspS~(jWg2tR$*1%W^rg*q&K^KD%k}^O
z8n}(G=d%WbZno1|iwNoSHBN;%=;TheMu@c}gDL{zx!ppnUMU3Yww&xemDa0`nh+r{
z^&J8)zgR3pyhRb1P2z0|8|i3hiO?2{df@B0f8d2WLG+f6)}dqCLQx$$CWs2{c!CsB
zStT^kDD^F>7y=%4i*~*-BuYrDKCVQ9O>2c_8DJ6CYmX~6j56$6bXjq%Q=eHv&1KXA
zy{?36XH-mxV}XT8pw@1}ED^$3T$EwgZV`|&7~%@Z0QIB$LIhCL+9VCphDDE7KaaUn
z8-tK!=8>5!UrkMQBlHsbs8(C+LXA*MsIdacBym_G8BG8VF-xfvpA`k7B$rnwnaf;x
zg5qr`BtY``Y^Y~+dznfL;Nfp-ubI<V60Md+i|eLd6wcHeD@i7(JTys7AQNR17-fi|
z0_y!uXV=V$lo-h|PGM9#(-|gsLaU+1IPs*`;7Qp;HSr`!tF~qUwrY@I(&C0`G*!)m
zdifLAUOWv$D?lcH)AAY{dLJ$IJ^dgs<)KC>J~T<K&>>|Lu(l9Gnl%exxPVc;SEW!B
z@S{vBg`ffk_!lUJT7xHLQYi%K@1~RpY^(sK`kOY_*mss&UEOq3TU%G0k(nh>8eu)@
zikLwT$|e$|D}wae8CC-d6$Q-Kd({>-0Y}QDwg@U<vi|~YQETv|OlpfD<K49NQ`l17
z5g3&cky+edvamn_rsr?ESgznNmFsfWw7PT`v8m52fpv4tqKc(nXOmuuIV7fRVh-t*
zAR}n{V*#rXUQU>SqAbT%cLmHUVb|=H^=oclvp23Ct10@ZVzamgM`g0V?84O12Yyf-
z^9k`YeBl?!Il*^E#d+}1_-Be-60(GRVNLZl!jWl*;1xqcD`4^Xn@*oo_51>~U?)~u
zZjGmbM!E+g!>A~eb4ySGi_YJ)qQ-u?T#3#y4VZzFuL(#M@iL`mU`Cl-rUdD{OxZ0Q
z!bn5KVM9o)Wq;Gcn&;uGr<ZX)8cY%u*itru(S#T(VDbB#x@+t=%4Kxi7|A$it~-x`
zTGw%#j=bnGG)XMLn6in}i7`RX1CqiNu%1{AVWn(0csDgrGq9yhs(~O!4X~7uwFt=}
z>;N8J6fobXpbDY_Ys#c52r6J@|D~!R7GO-7R0TmERbUCQDjMFKDySLQQYKYF&{S1a
z7;`SNVELg)utu&N&D5HzG@~Y1d%m@ll-1-_mR7*}V`X7OsGruhn?XNGROp<ti8Fv;
zsDSl?ZGNV`tb8OMyD7SY6V0ZD_!0;3rEH>=_!6Y*RvTce9m$~%Bw7J0@f4<%sKAXf
zIi&;@utHhN-alJP;sCysNht|(rDO|SMp90oyAVfLjmrTw&2TV4k1__HY>84M;+T_F
zpAq<I1uSD8nC`BWsjg)OI87221fXo969|S1SkXMNfj@g-!~uLMlLI5j9oR~AbZ8Y4
zEq5k?tC5IlhD5_@vPA*@#NV_%sVWHit}PeI*?!5BOluLPEyM9CXQ8i2VhHIdn>ZT?
zhE!d%&LK%$QD7xS?Yg4CB^5<^@V`S8VhB+vlcEq*5=GS-5fy4ei-XGaFBV;!XnKXf
z#wPB^_p|s0@P%&hPlzw!OTqis@%7@rh4Sh6{z@(3>sx|iu}=t?2==Ho7<)(*;8{8N
z1A`NTzpxoD?JD6$>_blQN3Adn%A^k=$maxq@TV}R8vBRk3UgL-InPq)6qcJ-7y6ha
z4q#8&#9AO2()rwAb)#HSz+yQ`$W+eX6LnJ)Fr`dxs{|F`@;PLhS6VOA3tEi2!=9*{
zT7xHLGGroXYRFV!R;>CM=0X(UP}yTE>U5je6v_DvgWWnbNzKp;Wm4M&8LaI{a11+H
zef4o4MK{#bD(XoD^MsB^YU0t(8eq(b8ND~|2jFk)0nd1VwHeoBrq{%cns~4P$L?Qs
z810i}UUs}(&ITE<mCIQ?b(!H(@Ei67Y~fj@;4NJ5ffF8BPX0O?Ey;k<QZ}(32!;%-
z_?Q;cV@51!LCF-_vFME(K(aKXnE`7fpe0JJAT=~q17m6nnzV(|Y<f{yI_e2CT6=yx
zYDUe-ZJFbKR@{${(?v}&6w=~2O`9R~)rGBtK7W8p6nx+CtSQ3l_|Cw(O5p3R!TOde
zf$JBF6>*MX5kj1XMFAV<DeOT+1vOA6_aK4_*hKwJ=bR+M!d_jBuY$$!DkyaeM-!T)
z=3q*h3@HfmgcR74X<69~nE29ykiiwWyAfN^;|iz=SW+g9lb`}NWoC5xsWYM`U__Z@
zL{I^nIWyXN>Wruf7*Qq}5hR_HjC&DMhUk1CqrPx)$_t1V{7o&>oaM{LUWt}6QYU)!
zM45Cc1QoE6_?vob?D6u|Blj*Zr{dBH&MYnkXSU9z*&;?@PuawIKrrOfV}b%Ot$3>U
zoBpOq$<!;3nZ*&Y$vIaoMLUkdUhjk*KZLJquVlw4iacy~%wym6EfKK}ZX?Kh#wG}X
zJp=23_l(D;nUi?XEZK?aH56)v(NHF*g&=p&K-|Ng@jK-@bHe&5Ji{~r>=~&Ucv2>L
z5+q~Uig`39A%6W;I6;5shcPI4V8m0Wu=a=wY$=m#kDvk~sCNkINyg&pGfT@4I$(Ku
z{SgZ=rcACsf;{UFF&V4j7w=6C)C_DXlWHJHZV)9qk0WZbeLhc+6EZ`qPNP{bAVlMS
zO;mgC*xpV3)C~PnCi^8w_8Zp<2>Il37c(*aQF1d`Igx=0WfNP-$_XkUQe+!zf<#k2
z(aCL$T7eg3QXqm%c`IdY1#`Mfa|}ZWd9Z;Nnr35PTpBX<;BmhjTNB!6>XBO7HH!<X
zfZ&xib>@516g7ijlu5w|lA5Xz1w^SQiDsr)e#!Mv6ELJqx*mcGh;C03&6G1L-5~}&
z(G0Z)Ps(I8Ly$L`iIc^A?vH=^lV<u4ZG$?IH-(D}ZAmyNVY*Hchqi;Ds5mWdU^~T)
zZ)rb$2JmVu%i|t@0~GJ4El~Ojd|m%UerOE}*uzao2kns~Lj2B=<^|=GF?|46yqR+%
z%^lz|NgOa_$|m}NV8~Zv?F1awr^Z$!G0s|Rs9U<nsXy6ScNg&{GVrEsVmI+7NVoO?
zye)I+e8O}QC+Da$Rz3*ls6)Y4@u(9nZt4iON?7S&E}%Y%A^N0jVz1i+&KDCGqF`Nw
zM3jtK6xLGz2-W|51ri5zNSRb1L5>0|sw35Lf1#T?$;*iH!SX>Sri~~|Gvyg%T?u=#
zfKuw=V$uWk39%@fxP<gTkgvw5jrn4J3sH|IPKcbpp+Yw@aK0@=-qN}Gps4y0s?%x@
z?E|lxxYk*qa_&-;;=0qu)b5QN)$mPzHk+j}6RU&6a0)TmtvIo1g@dOSL1F5J9@5ae
z-nkJK#zdLil?W=VqqZl#b0hO9?Mhzz@$5>(0*on>yAna3T?tV*`{EZcc_;Yd^3#AP
zFr-%CN||(d1esHJr9&y`u;?X783^c4K^a5^?vzPo5LCbs;4f7Mu>fPrq%sKdC<6zH
zKSLSR3S23Z${@%L%6PO9Dv%eD{a$5g69Xukx;02xkB&5)U2s=o2F@@{ZBE;9KVJrs
znP%RWXP8-W+_21KYt_t<l?H=D`<b^8i@UCY?c!tLd!`~pH@*SD$nZ~y{|VdH0sYWd
zj{h;rg#R~xIsOBn&*1yU6g=+91httD=Ci;Tz90AG5%E*t5fYg|`FMSBfc6<+v3Bmo
zNVRa`T+;G-=`&s|_Zg>lD>#JFP7)VrowA7oKrrMlAeMdyD><cWYGMJ-lu0Wg$YUjl
zluvFY)PsAJ!sT}@B$MGRwE|blq?Hily_(I?92O8ZaSZZmxnkb!4xE~SJ7tnPK~Au2
zNS{?@I1Wp?K0Zy;tz1ww{Pa9k^O~U_W{9&#kWbKb6?qn&pxvjuxVu7tPoJ6iK7iT%
z0=`~5Ls9%Ql7I2wz0b5&zNv7ZX-CB^urJ5}yD1<}WDVfa?0bn<sTnjtnbZJ5@(2>D
z4r^nJOIIlr{^?qtFsPu7-nnC;iX|GWi8cX$Q@r}PhPX`2T}~!PD0D$tBgVBPtS=4g
zw`Jh|y@6%m#jjyu2t6LIiC1*q3)l>s757$%+%T9#g2tf{o@s=v#br?EFB_|~45q|&
z#h}1BbwFRCN#X*TD3i~?3Gx~8@pl1n9P4sfIsbQy{izw4QYLjtkklnv#T1pTx(6B&
z!2)8!Qwg1j49qE$p%X!--;JFtRt^HVQ{hEq;6<6_MUcZwUXc9~6D2RmV4h|GM;C;G
ztdkAzO()b0T~Q`=LXdO(pp(Z`rSzj?^r*8n#Vc##Rh?&%ER|*zVhPwe!qDRUPwxh4
z{!5cyiVvOnXE#V(AQolP4H6Wb7=;!Kh*aOf7ZUeU_;8X#EwKQ5%A_wO$m0tU`?4}G
zcyG$2W?)O1R3<@X@dJCqqQenp6&zBPS!GtTN20UJr}<9LbxBii{fNR}M&X~h0!j&5
zHW`>OE5H!jsu?aa+=atWsYm!Y?9KGSfnCsgH>d1@7X$xKz_(Aq{{n5YSoXW7;K?Aa
z1MaUpczU+{JZK|eUwoe@2MI$($3)R;Q{ctN$*D-+6xV9vdgo#CESjm`8y2}dT2$x}
zVH9uzIfV#|sGxt!WQ0Xf0mqhiuot{w;;|Q_WR8X>+$0uYOqsM7f;{$ugACit^pAL{
zi{j?#u$_saO;R(krA*ojK_^65V>GixgDBvPBz;H=f|F?<TOK6dL<ZiJO<V~CLj|0v
zSkTP0hJ8{&sTr72CIuzP5%elBC-;fBteiRhJekBXeW7^q69gFr9O8KPs!n$JY$l0`
z3Y}0UAG8uwz}bkO^iBVul_W0uk`pHnDhf>!2k@m#KItP!4SF85j)TlFCMc^rvJh(J
z>l%9;O8O}7#cXWj1kALLN}%y-P#&6~Ruh!+ou&Jjla#RPZ+YA}#+`!I5*6g5Oj<2L
z1svOW+|xh0J(Y122k@m#j+-EN+>6{1_$IEQaaf0tLTFQm1A*T+HFh90mXUG?;y&M7
z3u=0fw-H}&jI;&i$58hMaveD`{FBMIu(-dCuS-ww@4+}ll>LOyIt(Fl*CA>AD<mP!
zz8eZJDi%i8w1)kPe4oy`9z@m+M1CWZux>w1<nIGqVKm-^3;_(8W>e5;ycxyFF?8gv
zr0U2LZ11J_`P}#CJ|`OA5849a5E&^gph)Q!pe6|gjZ$Xa3Irbz>RWswi!oG6U+2ri
z4=RTccKTKSAt=DFPEa8SC1{gJsFf-)`5+Nu&jbah$F&%BbsK1`+nK#9t4eRoX`+^2
zhpdsWLn;Z<>H^WUL%#P%8txyE??qBfilNf`tR`MQ<i<5JEXBK)s(2W6aLlHt39A!f
zNU)$HrZj$l`^39~5X_I4D4{*PN7)PpHPpNPOK4YCHtBXeAV!x2>;`0_@hDn0))7&u
zHJS#|v{qv2w1C=U^&w%;LmQ1xc;1G`Ak(obU3RJ)jUOawej*mjaaN0cIZ?kDgH-Xh
z=j|Vquj-QS&qO=u4eyh7fp1X?o`4C`zx5$-3Ter`@P)P39Vjd;8bNJ%iO^jes1Wnc
zkh&!Ok?penYTbCgLTtp|2xan~HnjsesWq5f?(|OThaE#$G%m#8OAl?NDE2VKl}R_A
z<Ik|}LW>GR>Yc4N@Z!J1Xyij=erV{LGuRorbvNis=1iCmmt*DxkH7(94r>hiL+EUV
z{WsJlfi?E`2z;5qTI(LPyDwO4*l(dc!wzVuBCyt8Mj%nux>Pd_dpnRb?2D<2z?t?D
zmujX<RcF{AXR0TtioiPihb~o}OEt@||AVRCpeh1q*|?mNJ<f8e>J7UA$Qkw`sv@x7
zzSyOzcc~JFeI-*JrYZsx_G2zp!li03>}Q$k`&30>gI#GjJvO*hvkiLzkTdLdsv>Z<
zeV$7-+o2Lht#xm?!h!kgGK^t;1m%UQafp_b8a#vv^B0W|_ZqN9`ZVK<D$$9r>l*<I
z_(M8B3b>6jJS>{=_fNt5VV^`_h1|=h#=)O91rPHQ=K#0HgC`t{^iDN=MTK|^h3b>o
zJYJ(D3tRB~0LIn$HyA`bS`)AA{1n>YNp<BN@GY9oMsD4Q+M;<Q=54AhR$&;S3PGk%
z!SJen>fW#(0G94q+}F9N>Q<7@upXqIus3;6CsduKYMh7U>BOvw$2vCvWtwK}-Z&Pl
zsm1kbzVa+w3W?=Q&={!PPn`2(+>DpPwYcYX3~B=RPnmpxK~Nz@jPMe4<?}^G&Ox`F
zQR%&rxO{-|Q4C^|T7xHL6AuBwP@$iAZmqG0VRY3czRm^v6u!j=v1YvVP}Ypg@D-ju
zG)e5x31t%>qfQ7i<(mnZKdr|4TVRV%XK8YL^bpD2euNoAR1h;`rpZwOsrnH<g_v|p
zOq14hny_zxwEC@N5cb^w8$S-Fjz8`s3&zAf0#rPtPS85IEyKnW#}?!*R@B5JOHQZT
zg^1j2WVIQ&!+I30@5A9HGV?y1ej!qXXk=r&5<y~o%M8)Ig!OkIUFenQu_+RHJf~R+
zR+TuyMvJ36hi)a^;g{ZNdKQCdgF*ccU+?-_0sKc)A-<2V7Y{P=pTNED!P7fU|Az7m
zm?LeMFiYpR4)ntXQYV7DCTwTlBZ+xaeep@qYt~~JQ&{&91z!AXROr^@sHiZ!cR^sW
z>JromgYSbP_V2(9*IsgV>VjpnLl2v05b>-d5ZDQR=YWQSU(?TRIQ+$iPPjU{^hDnH
z3G^!^Bn&U}Vz5RMJVoQzaWt_09+d82oeh$9Wm?0vCHH`9j6rB)`eliuZ)sVEJj;@r
zz`7}u%aWi%niyeO&MPe+XIYjrDm_;Wd7dj$Yw)B@K362jobJa7mMH9}uDWXMcBtpw
zdMiE>3N?O`w6_DvBr!m5l*uPj1esbbKhs-ichPjo=xRws*r`%c9BaUSX&(Uwm+p`;
zG&Q1fobRVlCG1a>TFQn$JZZyYJ-8UavOx4KZ%b)De~eXOE1{w^PWNX3bCT{C<JsvZ
z7y&-N!gm)8q8pah02ozd9wLQuJ@RX&;HmQKz&+!^*S7>jH}Hr@v344tz^Lp!B+vV3
z=$}RsiV6ELVLn53e+@`&e3B|ZOUdVuloq}l_bKAc)iUneA#gMLc@X8kK;-kV>cnD3
zJ~bWki_;;$G#&EG(;=Up4*8YokYAk+`L!uX=!IhYMaU6!lW(!U4ib#F9&>*`RN)P}
zpFtJkV4jEKZ<@jtGREGb<}}nFqN9QHGp@xHYvW8scjMswyx-k5r<}rYX#0daBVoPl
z6z10>$IeAix{aI+t^C^i%)rc<Nb2g4%$kLyz8*;;fux}U$?Vxk@Md>XZ-no~0S+?T
zuz=ABBo8ije-C!`gb2Z2l(l{5u2rO2aU688qq(KIy`{Z%B?O0O&LW);>E{)M_yF=x
zA()@nm$x$`Lph>Yvp|TKps{(o`a}{NSru^eHtg!{LEeIL1;V&_YqM5A5#s~XRQBBe
z(M3VD5pOPNC&MJW-HtEjKwupUG!v`w1+BmsIIcPkInhCvoD)pnHcy$(A2`=Ao~DuN
z$sVu7fh#1AiULk}Pl<a$b4)w~Ot(@%t*z|A0=<jjuL6#V)6{1`vlgi)27IGPKkfUF
zuSWbI-}ii)X!L&w>1sd07a@&_tNlcO2htkxZN`7!KMMFK4F4LiCVq!>mgo&E4$Kl4
zaXNvtMqC&8o^O^o3Rn{l1@<U-WUUc>J*Q2aUWydlwC6NURO?jx6HZlw;F+9;kcPyt
zQ9wE#rg1$IrrPgUP^w2r+S4LL(;gw3KOlv{MhT-u30@SXajoEVE2sUOULUoinm7VV
zO?;lyw-~du^0Z1#oXhFH%2ColC28z8l`mDsM7WA{vXs*_QcYZ95{G+ClH?J<G4T&3
z(fpRv`7wgGb9xV_Pa)MrB2KNEkcLEGydY)^E50{ATU?DaByI&JB<@5?A35J-%?j*r
ziC6{ul_eqeaLEV!VJv}tT#AT=;;&HpI96r=H?OC2>AL|cMNv}0@b@T<!!l)EJxnZs
z(julT;0_{ynng_c5tPP7lT)`6b{{}#3D@mKX<T%mMEyO(bseas(ydqt0dWpW)ZY^*
zjf-=gy653e0w|rql#6jt35YFD>5>SQ_Bf>%vG4-oQj~~`hLt)l22i3;9ZCU|T16an
z2T%$sgD6q&SuB`<ppqhfE)sB5Kdq?MwofXmCALpia2iuzacUJYi{Vc7HDI=>zec)O
zeO=5I`_(_7?LS02^&0W2zXv~DI8FO3(hlueq~~bgM|v(}b}?p1dl?v;F^3p)llEI+
zmh052ODFnG`ghbCalZb~NCz1+%9v{ya}#6k(0`8F2lTg)KF+mYVE8$`0xR};hF{g|
z0sn^6PZ`Ad%f@MbtW|^h`hh_bzQp*~j5gp$g4FNTLF)I$Aklx2)B8C6yCAjtT<}3q
zzQUMabNWYaWrV0zb%<IeIb9lh4wRh?_i(x`L>w*(QNP~^y^Y!zLJ|0a7efi8zhKPo
zLal(6Fi8>#6VJLZ@m#=|R>qvgm^Z`!3QDblXkryaGn>;bobIilx!BLJT|vDRIDJ23
z?y8`+ALX`x&zNf?)Z;A?;&yk0xIGjZ)oR2i8U9j)wEe9JY5V(3`BR2FcplHuj$!t9
zX}{9r$_=Jsl+W*NvA6x(l4OrJ&ioINgyjr!>1V;;VI8XC8d*{lWid)mI;FUR+ceQR
z7tO@al-Wu<c7ty_rKL(I?goC19f<0-Drduz?^sHu!{S<{2Yy4)R)W&a;G&Cf(`JFv
z1IiY>7qN|wASnI4vJ-E<&OA$&zNuV@_ZGIDBTGL)T|{i6%?y;UDQVnUc5>ZO@x_V*
z{wiVgQr*#+miiX#zmrQpQx2+sLg~9)IxMbJ14>-{+$r6m22pzQTx$0-<vulnQpI^x
zx>0<RDU)0}EWXT?)my0UFy7dpb_cf0(kongcqf&P;>2X4&cBOFH;Vs4UA3rlN{Ww4
z%}%M3OWjT>!KL$^(jqPmJEdkWUFVd}<kH<vX#<xYcS<|B^c<ItipzX8=&xco%YvB>
zDl<fWBbAPd`=ZVI43XrzyM*OS;7xw|_}C`iESA2hd?O%K1n{1^*-nY-R{4`oiEQaj
zrO{LOD1K2xAD1WH6j6!Vtqib16zkXooVwrZ6!Iuy!bd4RR8zzaJ{9TvJ(#aDJT+Ct
zamM>7#uGuLiXa*nFKb_b|Hd!znWlzm8aSQH>0?o%|1?rXd<dqiihGeN;z5QVLFyBq
zMCuox)99}bJk7PIMyX;g{J~JM2L6Q95L)n^dr`TUcczh&(C+ax<SFq#Su47Q{v;@+
z{6Ul=A|=Q^GMrw4bb&ICbg^=nF+on}itGLD%29E@KcGAz^uP|~>mncMS6&cL1TIr5
z03Sj6mB5E#b>9el4ESGa5jDa11mj;2Zvr!)G4mO-6qM`L4y1e47eq)OP*-#9YOd{J
z{3gb1V$4qBtX{;Jix{(rWm_cP)-3@JMw4%mh#8%}L8cjGnk>UvhV$IxHOzUDm}6L?
zRas&T`&yM1hK;sez}(98w=(@54Bx@<N4V|7PTP&fmq5RTIb3Kw>wBCjA7{!Z9hxEI
zWnY&<x?Lo$HeU68nQ6YvG|z#?@L$jJf0yy!W&97gmzB8uKHz_a@vktxRjCO+>$_ge
z59ZOTC3v;}HLiV)YgaO#*BSFVWB$l8tP}@AoxYXg>d?>qeud`9uh1M-U=^-cs~J<x
zm;^9;)h?ws{EC>*`1y?QQuc(81eT)K@OLo2!@&=MvX@8KtGqvK0sa8eF6FN9V}aGm
z!{ILnwkw|wF9hZ*!1r+59&Wn{+&-qHxa~zq-&8V6V`PbT1!JyI&Wc##3T18N6{MRY
zM*@q)o=CSg$UNtYUq%*-ai$z+$}DrvGUq&xVqBrwxml@<-l2^vwNVSvU^4oEb`5hl
zini_I9;B~pk23s}^4sV_@g0W0!|)Trs60!5LYYyyP`seDR(9(zC~GS>>OWGpR&D`)
zcV(acvXZGB)W42aZz?Y<6P1_gH!HVSUZMX2m@&Oqe6w;w|BdoS<@@zk<xgn)8%3)+
zs?Qa(s_xenb#>L>0^U~j8Nhbc7xnGphN^a)zwYMr(W-9%^HkLWWxMz`r$4BQD0S+W
z%z&Y&|72DoeFbT&dfW^st!i~_vACY~a6RkcR)%k7_zvh~y-G54g1#+wj<H>I$JQBL
z>ZP%BjichRSkBn4eis~wW*qR3W7irlh~LBp)a~k9v36*nDxOd-P#47SGcHgg!H12M
zx)K<of7JMqvM&CFkx~B(d+!CXL(HbC_};>Mij|xuI9<ePGpA>Ax`ERjNH2h`29+z+
z_r;$!ZdUJ){|_UIQ?QNbze;=+ezIEpFFa|e7r)Y)5xc);G>duS-;FNO=SwOB;w|4>
z+5p!Mi2w9G2iWKL>ko15vz$JMXJ1L>6;6E$wen-1PAc;lp3m?A!-qM2h|`A||185V
zaq3g4?L1DqIUV5iAx{6D(;gpjp6{ph0YA|X1{kAJ+M`pd@EN~GoS}3otCdeGPpQ@Z
z>-=Bz|I+_VAf)Zop3wH{*XcLvcj=Go|EO;>ZZJM?JZJm>dj<{;cs_kOb|v!TlgdYw
zIqFjNOw3bGom6jD?@>Rkp6T1@JKs0xyUKU1@2KxV-zR+E@%^*!fBW9@o#)@{Py2`c
zpYi{r|EK;9f!%>rzzU29?g%^_crx%>;O#(Co2PBk3fe8&qgt)8&}cFY#61JTKZ%aZ
zKC4i|hFSb5{P%2%MF)^4!nxR;gjmM75KjK|@#5mR2cS<mzprEGF2`M<)Dfd8bbE0Z
zLi-=>ezdo0uo&$A_=b>%kyjv%Adli($yTKzE>v;SRbdl8*jF4U`x!V<`oxdK+1Sy=
z>dn^RST=pO=t<`?LnG_18nx58Tyvk5%?$3b?8|eTG9#Ba4`#EXgxYA~#h-Vg7kyWD
z4Gv~TkoOK)BRMgg8?fwbreE}p=kn=cv9<rQ^uSae-Ikpez1^un=3nZrxpyR=wyn|T
z+?Ata{n<?JKzdO07P}})TB6GiUP+>ZC@TjchCx0$Dw+rKcn@nRo!^Jjmeg=sY)I$3
z2J)GM=^krfY&boVCk)`7<D+TOm(KU)Q~9ynPWp>a+cE=}caLW?BZFzXCxgb2YV&3R
z;=Ym8XzqZO7u~7R{1`?dhuPe1WwRJ(1}bRYkRD0fnE}z0VMNLvzqC#4NT&w3VQ4vq
zHmATblgbLrNjlp*vfq;EvQk$rmmcoVj&t><OfG+Et8n`1wuVQo5sZOGCRz5_sVi}J
zR^+vHG(7@=bHW`z&r^3cml+g0Gx;nOVq0UQy@O)7+p;dtq(zUb!*vJ2Ik%59(x)tA
z!mQ!p)W{&WL#tsA)C*Nz1xbc?rusKo1D8YpJOSO-$O!bZ)9TwJwvH6_-+dr8GL#nU
zMsm<$7fh}v1G{0;^|mz(;&mgb{%m@4I)4B!uw!<{M$3A~V4U*i)JSS5ZKL0u*qpjN
z4PbXBmqBB($r=*dQg*)kKpGOc>Xao%U9y0+VA=T{X-dV$baqs9XY7G&W_0^l+8!6@
zrN^&KjZ1hdT~JDJZ8}AT9Yq8U&%#nj?RSSJ*F=sja?lzO{P)E6rv}n&k&f-`7#qoF
zhSRQ5_oeNFnE~i>>sY=kj|<WMv3y!U3A~_SX(g+3Tar0svT3{6v}b%IHJlkJHP69r
z#Q?~10ySVxe-sXC9*|Q%oEs7;DLr^O`YW}T{8Kc#9qDZ9Du!~UdPfc-Lsfq!o5_!t
zYT3qNifz0cdy7WUCVER%Sc|+6SC_5Cv#ovm`ZD=6%qXAAU|F?b;bpUg!eWs6zO=oF
z6RXc2l?_@2b8`eEcq1&Aj9&IbR_0(fX9jF5XYJ27clRAg*`s1AqS@iHmi>W{R9*HE
zI}u)QC!*G8Q@F<Nw$oVX!fohC?iRT>S&-zt>qfxSCd0?*dPfdgmtzGC_or>KGi48@
z^A1j|p58&7pshA2<O->fo^&=n1Y!Ec=CN!(Gmy&VU6fcqHZlM$7M0g7F&!n02V7Rd
zE-!&AWD`$iXQ^^!2~3s10b$9#0q&I+`DhA%pRh${tukwqS-Z?S+$DgG>WXG(|00ho
zN-)p*t`YcL_&=NNl+<5Vh6y-Y?Xj@Sq{V8-nV+D)!IHF~a&2pW32bfgz^xvbH1C?C
zN3*RSMYejB)#_1Y>k3a>j~4OZq{P#s$JTy#A$XY&c!&qZc`#kE*0Qqc)Cl&Fk%MVC
zx}J=k9~bhG3pwD?Y-*hS(k2)OJM^vlMc-I|jvva1^;Q<!p^%%HyMZyiHM(!z6=Nw{
z^>RZi`dVHcUHDnT>f-))f|6TFwNtFL%{vs2zS}(dZu987&7<!&kG|WMNz-w%<+8Lw
zU_X+Bg6O>?X;*m1&E(+lMGm1uFGVmcx;x$zq;I2{n<~A>ZrVJv+2)zeHqUIfd1kY%
zzcg`eo=I$jmPm)ifZ;?*JbG&P=&9YKr*@B?+C6$|_vpLbW0&n7yKMK2q}?-;cF#!K
zQ}CW6>oW+3u$`s`$(4C9slm)x4uKSp#NCg{Mot(^JE>ucT06Xh@~EcWqwaRkI&JqT
zq{E|x4v!K#JWA;BD51lngbt4qI>>fLH>D4zv)vZ<ZLxJ=V9d7DBXUbeAW9MJ{xoAK
zqC}kQ!E8%qY(Z<Ll~e41o=SvjgM;v81L;wYBjE7&ZAOTW@TQDzooyquT|I3mc!DB3
zJTukdnW+ws&2@Net^<mtne&8`C-U?tyu+jL4v)f@c_wR_NBPS<%3tPD{xXm9mwA-G
z49cG>PyfDs%T@@>b!2H9@pX6K{MBc#+_$egHGo4y*N8PTK5W6*cyDocx@DbcBSR$)
z(lI@Qr8uR_wo~ISQwmD^4y4m?gb2>r&F#*luauL%#mcAoq>z&|IVqzXa-X2EWgf*Z
z^C*6qNAb%%7QM`);AI{KFY_pPxktgvJqljl=A3IdJjv0ag@*u3!|KOjKw2d>LGt7X
znVpk}E4<h+mhmX1JDbYoq?ICUEh(!U&)Y8e4fT4Oy5VhlzjHJyZVNc<<gDz$G#@Mw
zNkM<|yl^(Awgs-24qgHw4;^hvlrmtmPi?MSIojljb3F|gXjQogCc$w<#tDwRy<2f;
z$RA)WW^5c@EL(1iFr9wHpaSj<@%>dekmYd1NDWdfNs8^UhEq5RQwQDb6L7j@Olokj
z*rhWbAy3v*PF%&%Se}nyW|{rttR#2n%nE@zpJKgKZfvykfQ{9QBMElmkqn)I*O7}M
zv&Jw<Y@A)?InFsb(LkqQ+>@S5u_HZf9YhdbI{vlMnGEhKGeYrre`?@zHZm`X6aAK<
zXj9!pp)4JY=t#@kY~L_=6fxlHw4v>{jVU&!ayt>d^rvjMxH&yC#&OR<^0BK+jXdYU
z6V@U5n<<+L+{-pQLri*yN3&_V7hr4XN#nqg&7D25wxeZ5ds}Nq)5?`yE1Ei1wykJd
zxo&w&)4G-wK(x1YwzMrjBzC8=V`*Lm2)BvD0DF^OOaWp0GFPY1YHbtq=gVNX<*MZ^
z__Qu>Y8B4uf{vYO8wM{=gX=Tt?4WZ(AuhNq01wwi@kHRH>zO+$m9#)5cNR~eTWeh<
z{g|U?5CDZkVOhDH8wjLjOC!K*I3D&?S?U|Bx%?o0!aR8PB%DX+(gR*<-BtPYNRAHB
zw1P^d;vunwDp@Q<&#_6AM0ZdBFi<DVC##c7t3*Yb+nF97<)z+(>EDSXIQP88x)N*V
zV8*sa_?C#I*^<5zhmJI@a`-0f4SY?+mj~Da<iUIoVr=WmT=RO%9>!IK+_*_IxIxNV
zLs<AYcwxT)d$MJ+_afjP6)7qmT{}EV*MBqmu*GFX21oxrfNXKOz>87AZFsh2i#*=^
z>Owgu(qdTjgKiu@d+9+<3U4K41e8dR%jWi>9-ZQw!gmbxYq|YS;IASs!Snhb+3}&<
z)7zDKy`W2jQyRCUdGN5nWizNp@Eroy#!p-}ASZq$I=Y(J3JETA+ARlFuaI=zkcvhy
z0vc*BWluq3jHK4(mBODuhgSt9^&`xk=$Rz8-Eo+bawp1pmd|ZV{PN-e-drJ`Y5X8$
z2htRJ+lJN_-p)clbuNy^l4m(GfbjlVeW}J`3A3UXvhGJqG1sk|s^ucZ9G9Y8>&5!`
zI@WL+9CMB~#gcBGgFJc|F3L!n$wO09bnT4V9UINP)B`jebg|;}E@!q#huz>y@@JsO
zF>s~v%6SxvPF^>q-&WbnRBgE$b)|JBz^e}p>sjk$UpAmA{N_l0>mdoeHzX>j7Ip6I
zj$^*k#kmCE2(`)bjKfmvC0!3_XoMs97DpG^!Ly!W?TQ9TxdoJD<5T)`_>ew^(IaV$
z<_KF6esE7%*(0ri6KUL0gZ2!vQ=-P=g$>fGxt#4s+Sq<zNE;)-r|E6Nu-g`}-UWLb
zEUp1+Pa_?4TDW8FW4^TF+_vbqzBJ>~o=a51v6<cAmWCeyb<v6}a7h!U($%-)0g7d*
ze_>9Yc@fw)bWd7A+IU1+K>8<p9>U1T!be$V@<h$7FB-FGIu)vBjF)sRPM2P447{Yq
zhcTPvGd6&?g*hF?TXjjc`dwlZ{u6<%0<W?(tOHffvAQnil@#i}&P#||S<(Y3bI?A`
zFwHT|=z8Wj4F9qRG>_fnyR~s_t|%W>a>}@pf>t^-7ySKQzu)q;1FsG#XS{J?-@eT|
zsQlyGH{BH6@_Io(@bj$FlHLBRi#H!Nb}B6!unxAN52la1Ub|!|qK>3bvG1leL$iDU
zvcf8Y-?(Y>QExv~rhbyp2ys<fzImZ?k<wyca`Uj#QgcDm5l1fAM){uL=`Z~1#o?=u
z@AmSQ7~)LQN4F%=n%3X|<euz5W9abBYqLyWSMK9HT!VkS@XhTX>pyp=GLImlrcxv8
zkSsrocLlql@7;J}tzgV#F|?cIS*tEAg4b?s9DDti=zgW{)uHf}#Ap1&fstK((JjTA
z;6~<$-7%c%JN=rsGp`Q)+bv3a{`SVPGsMmd8^>1eJN?qR1IC`WGpjE8!-Z6v6phf?
zTF9^yW9k$uMF-2#4co9WPTHMD@r-&5oNd}egUxq3d>7>|X}*(6)AMS@D_|?}1Q4UD
zJrAwNvEEWhJ-jNnid**3Oc{Gv(lfV01{d>{TOPb6y5;`t$@sTJ(q-@)&3J<neazSj
z`N-=Hd3%WDZ@;#mM$G(c-BNVR+<~WVrydwTcP-?js6n>haUvgQFD_qw<UIy4R|C+U
z^bL5GEuIv=y*M~@Xy+?imSQyjdE{HSD|3@V`m?F+lh9C7EZ(A=PCn&wNU;-nKWu?k
zX2!97TCFdo-<KXZpv;rLshp2&lLOTi+p(?#%rTNgS=L+#e{ivYY>|>@gb$iSF;74A
z=f$1{yR&(=#gdcvl@vd?{n+j#v^~aNMVXdYQnX&M;0XJg6L#TY>@CuVNf}9NU%5qD
z;+18(QF?ebEgmZLx9ms?uP;5BZ+d49d%WTzFSm04y^p<OGe&Gt99Fjx|1X?X7{@SD
z>EHKb=iQIj#o&u0L;ag>dUJc-ojm?C-id1l7DPUnc8Gr7a|J%tZTgcRzvuMc`!0QH
z{Nrtt3x)Cdt1sGJ*YVQL#?6mT{A9=VKl>Nsnhke9`^v8#_xZG#8Nf>hF%w-!@lE)X
zN|X{M3VfuB(%6hdFsaOl)v3{Fg31jEEvYJr*o+`$Gh%a@7<9fy5mmM5rU@*uF0lfx
zss#(J9eESJJ@~H^P={EKZyTVssA~ru;o7h$U3zjR-Joq1hs1oZ22M6hs%H4<r_UJA
z0(=+wv<5@f=r8}ms#P^%U}*GJ@KybSMu#MZzhWt(eg#US5v!CKK3$3WlOnbbKtk93
zc>5))Mzk5R%}~L1Uu;(b@761^3(Sj+Po1;xTJwjYRk~1PDKj0NAp)^s^NQ$<*cb?6
z7jT}c@HWLy9H<x<v0<MU7lz9+nDhY|SK?|wR~lj|x5Go!p<3y5KY7@XVj@vio2YVY
zZwR2)FcLZ=VwfvT&&-NsKmooX(h#YN;IA~2i00(YQ^b=UL3A3X+fT>?CVg?Aln_Eo
zY9pz}Rl-$DuF>guCS3AFrNi76GYsx7T#@w0@g58*AntR-uhfGWE6E*+KqbXV;LfAP
zQIk$$7bFrfM-5ypt+kxSNMP!u3``SiFrDJ$QQ~31qC>(*`k~oVHPx9q*`X`G+aHPV
z!tNMhIj|t;J!%->O)JLq^e8c9j388z5#WfUTS-Y1Nj&hv3R2Y3<T$biix3RH!LP+8
zAFOf|TpSJLFAXi6q&JzQh9kO;RUI{AGf1)J<`s4Ar?Dz&kmW?xswn<btJE^{h$f2W
z5lyHK2`sB<f)yHTgqMI}=&(QPakh>jv-iM!Mx#+xl||~iAz?V?+7e9q6VzRmoTXSx
zP!E9mgsG2srzPU5KB8(7QxC&AB_e7x5s5XNI5f4~02&h2Qw)H8nIq5YNK&Wa8ws^4
zQI#kgyILB%N^@46mxhEpFAa%!`E)RE4IRQ=LLctLNHmegR+G)lRbrDL)14f8ga&K%
z2xb?$!{SCIOnvfE8k}ps<dv9B!m)r70;=*9be$Gd!l1^~*W@Rl5w#(T?ih?!scOS)
zrD3*U#B4EJ@rOX-%Jq~Z*HiVnnP`YcW0OyjR0-nO5H*N%!YFf2hIg(EcdiV)X$5_f
zNuZfC=%*d#Psj8S4e{xOLDm7@4ber4nBUR0VqHsH`?{ueJw2UG9m_k~n%1_r<L0n!
z8R1uUba%EQU{UDBHw}6-CtolWytPFiYX44eTQ$3{LeaZmvB@8y`xj|Ry^NR$MKWz#
zgs?_{DsKRjKZ;8GM7<io&)6n^L%pI6)?<)eZ=FQ^4m*j8ub~O}<0{^NVD)~?qMA@a
z6PtY7Km!9?mafJQE5P|wBVmM+f!N`IfnJS@WYCBLqJKtM2VRNB7GaYsU%N%$zbzye
z6IrfLGtbAc(9LJf!zLDG?C=cmajcWK6vJ7#+losX7~zXzZb<`&8_2JbjA|lrnqH0G
zjo9Hj10{T7hvzmJ4F>&lCXCxG2taEMya^fVOsvdxvBL{sHE4<00b_3<yMgA+!%bix
zjq1XWp|YY$-MWGbY_;a$v#5X;cmqA!U>@#*@VW-m0SN0Qgo5|@=rfyUf2Ufr$4-rI
zvG6LM^T-dE_qai%jo$mA-<<L96DPe`#0+FY^h1;r@I*&Hj5z-R`CE7@)8`{<2h!b$
z^Y$TKhZ9&IZY;Lqc3~g#EjS%-WxA*R|8bo7PyO%@RDks3D=oG}(F0HcS2}0NdmB8p
zMAXN(X{ejet#+c8;^G{lOwa8Uv-y<&kLXf?Or^WO6FJe}dsHxL_rDIrl+b}#3W=0r
z&oUYt;4{xC_&K*=piAQ0f_W&>?&h;!@s5t`n?d7#@&CfayPb;XZimk8+2WmyK)`tN
zJCW&baX0Y^3@^!nGv9!q&qkJi6FA{jEMVz$Fp6^*o!W+QGk_Z~mOaa|$kX5u^C4<i
xPb3-Ng#Ne4)WLd^H-CdT3(*bARBe^?MEat?n?kysdJmC&*LG<7|38if{x4<$DHs3%

literal 0
HcmV?d00001

diff --git a/AddIn/deploy/install.ps1 b/AddIn/deploy/install.ps1
new file mode 100644
index 0000000..edbd6ee
--- /dev/null
+++ b/AddIn/deploy/install.ps1
@@ -0,0 +1,83 @@
+# Design Express Res 部署脚本: 复制 DLL + 注册每用户 COM + 生成 .addin (无需管理员权限)
+# 架构: DesignExpress.Core.dll(独立核心) + DesignExpress.InventorLink.dll(Inventor 适配)
+$ErrorActionPreference = "Stop"
+
+$invVer = "2022"
+$addinDir = Join-Path $env:APPDATA "Autodesk\Inventor $invVer\Addins"
+$clsid = "{D422E0BF-02D0-4DAE-958A-7BBA80B718E9}"
+$progId = "DesignExpress.InventorLink.AddInServer"
+$asmName = "DesignExpress.InventorLink, Version=0.0.0.0, Culture=neutral, PublicKeyToken=null"
+
+$srcCore = Join-Path $PSScriptRoot "DesignExpress.Core.dll"
+$srcLink = Join-Path $PSScriptRoot "DesignExpress.InventorLink.dll"
+if (-not (Test-Path $srcCore)) { Write-Host "未找到 DesignExpress.Core.dll"; exit 1 }
+if (-not (Test-Path $srcLink)) { Write-Host "未找到 DesignExpress.InventorLink.dll"; exit 1 }
+
+New-Item -ItemType Directory -Force -Path $addinDir | Out-Null
+Copy-Item -LiteralPath $srcCore -Destination (Join-Path $addinDir "DesignExpress.Core.dll") -Force
+$dstLink = Join-Path $addinDir "DesignExpress.InventorLink.dll"
+Copy-Item -LiteralPath $srcLink -Destination $dstLink -Force
+Write-Host "DLL 已复制: $addinDir"
+
+# 每用户 COM 注册 (HKCU\Software\Classes)
+$clsBase = "HKCU:\Software\Classes\CLSID\$clsid"
+Remove-Item -Path $clsBase -Recurse -Force -ErrorAction SilentlyContinue
+New-Item -Path $clsBase -Force | Out-Null
+Set-ItemProperty -Path $clsBase -Name "(default)" -Value $progId
+New-Item -Path "$clsBase\InprocServer32" -Force | Out-Null
+Set-ItemProperty -Path "$clsBase\InprocServer32" -Name "(default)" -Value "mscoree.dll"
+Set-ItemProperty -Path "$clsBase\InprocServer32" -Name "Class" -Value $progId
+Set-ItemProperty -Path "$clsBase\InprocServer32" -Name "Assembly" -Value $asmName
+$codebase = "file:///" + ($dstLink.Replace('\', '/'))
+Set-ItemProperty -Path "$clsBase\InprocServer32" -Name "CodeBase" -Value $codebase
+Set-ItemProperty -Path "$clsBase\InprocServer32" -Name "ThreadingModel" -Value "Both"
+
+$progBase = "HKCU:\Software\Classes\$progId"
+Remove-Item -Path $progBase -Recurse -Force -ErrorAction SilentlyContinue
+New-Item -Path "$progBase\CLSID" -Force | Out-Null
+Set-ItemProperty -Path "$progBase\CLSID" -Name "(default)" -Value $clsid
+Write-Host "COM 注册完成 (HKCU)"
+
+# 生成 .addin
+$addinXml = @"
+<Addin Type="Standard">
+  <ClassId>$clsid</ClassId>
+  <ClientId>$clsid</ClientId>
+  <DisplayName>Design Express Res</DisplayName>
+  <Description>设计标注检查与设计数据查询工具(Core+Link 架构)</Description>
+  <Assembly>$dstLink</Assembly>
+  <LoadOnStartUp>1</LoadOnStartUp>
+  <UserUnloadable>1</UserUnloadable>
+  <Hidden>0</Hidden>
+  <SupportedSoftwareVersionGreaterThan>25..</SupportedSoftwareVersionGreaterThan>
+  <DataVersion>1</DataVersion>
+  <UserInterfaceVersion>1</UserInterfaceVersion>
+</Addin>
+"@
+$addinFile = Join-Path $addinDir "DesignExpress.InventorLink.addin"
+[System.IO.File]::WriteAllText($addinFile, $addinXml, [System.Text.Encoding]::UTF8)
+Write-Host ".addin 已生成: $addinFile"
+
+# 清理旧版本文件
+Remove-Item (Join-Path $addinDir "InventorDesignCheck.dll") -Force -ErrorAction SilentlyContinue
+Remove-Item (Join-Path $addinDir "InventorDesignCheck.addin") -Force -ErrorAction SilentlyContinue
+
+# 关键: 修复 AddInLoadRules(加载规则文件), 确保本加载项允许加载
+# 该文件为 UTF-16 二进制, 每条记录: "{GUID}" + DWORD(0=允许, 1=禁止)
+$rulesFile = Join-Path $addinDir "AddInLoadRules"
+if (Test-Path $rulesFile) {
+    $b = [System.IO.File]::ReadAllBytes($rulesFile)
+    $u = [System.Text.Encoding]::Unicode.GetString($b)
+    $guid = "{D422E0BF-02D0-4DAE-958A-7BBA80B718E9}"
+    $pos = $u.IndexOf($guid)
+    if ($pos -ge 0) {
+        $bytePos = $pos * 2 + $guid.Length * 2
+        if ([BitConverter]::ToUInt32($b, $bytePos) -ne 0) {
+            $b[$bytePos] = 0; $b[$bytePos + 1] = 0; $b[$bytePos + 2] = 0; $b[$bytePos + 3] = 0
+            [System.IO.File]::WriteAllBytes($rulesFile, $b)
+            Write-Host "已修复加载规则(允许加载)"
+        }
+    }
+}
+
+Write-Host "部署完成! 请重启 Inventor, 功能区将出现 [Design Express Res] 选项卡。"
diff --git a/AddIn/deploy/install_solidworks.ps1 b/AddIn/deploy/install_solidworks.ps1
new file mode 100644
index 0000000..5713657
--- /dev/null
+++ b/AddIn/deploy/install_solidworks.ps1
@@ -0,0 +1,59 @@
+# Design Express Res - SolidWorks Link 部署脚本 (无需管理员权限, 但 HKLM 注册需手动确认一次)
+# 说明: 首次部署后需正常退出并重启 SolidWorks 一次, 让选项卡定义持久化到注册表
+$ErrorActionPreference = "Stop"
+
+$swDir = Join-Path $env:APPDATA "DesignExpress\SolidWorks"
+$clsid = "{4A7E023E-EDD8-4642-B337-425E02394C81}"
+$progId = "DesignExpress.SolidWorksLink.SwAddin"
+$asmName = "DesignExpress.SolidWorksLink, Version=0.0.0.0, Culture=neutral, PublicKeyToken=null"
+
+$srcCore = Join-Path $PSScriptRoot "DesignExpress.Core.dll"
+$srcLink = Join-Path $PSScriptRoot "DesignExpress.SolidWorksLink.dll"
+if (-not (Test-Path $srcCore)) { Write-Host "未找到 DesignExpress.Core.dll"; exit 1 }
+if (-not (Test-Path $srcLink)) { Write-Host "未找到 DesignExpress.SolidWorksLink.dll"; exit 1 }
+
+New-Item -ItemType Directory -Force -Path $swDir | Out-Null
+Copy-Item -LiteralPath $srcCore -Destination (Join-Path $swDir "DesignExpress.Core.dll") -Force
+$dstLink = Join-Path $swDir "DesignExpress.SolidWorksLink.dll"
+Copy-Item -LiteralPath $srcLink -Destination $dstLink -Force
+Write-Host "DLL 已复制: $swDir"
+
+# 每用户 COM 注册 (HKCU)
+$clsBase = "HKCU:\Software\Classes\CLSID\$clsid"
+Remove-Item -Path $clsBase -Recurse -Force -ErrorAction SilentlyContinue
+New-Item -Path $clsBase -Force | Out-Null
+Set-ItemProperty -Path $clsBase -Name "(default)" -Value $progId
+New-Item -Path "$clsBase\InprocServer32" -Force | Out-Null
+Set-ItemProperty -Path "$clsBase\InprocServer32" -Name "(default)" -Value "mscoree.dll"
+Set-ItemProperty -Path "$clsBase\InprocServer32" -Name "Class" -Value $progId
+Set-ItemProperty -Path "$clsBase\InprocServer32" -Name "Assembly" -Value $asmName
+$codebase = "file:///" + ($dstLink.Replace('\', '/'))
+Set-ItemProperty -Path "$clsBase\InprocServer32" -Name "CodeBase" -Value $codebase
+Set-ItemProperty -Path "$clsBase\InprocServer32" -Name "ThreadingModel" -Value "Both"
+
+$progBase = "HKCU:\Software\Classes\$progId"
+Remove-Item -Path $progBase -Recurse -Force -ErrorAction SilentlyContinue
+New-Item -Path "$progBase\CLSID" -Force | Out-Null
+Set-ItemProperty -Path "$progBase\CLSID" -Name "(default)" -Value $clsid
+
+# SolidWorks 加载项注册 (当前用户, 启动时加载)
+$swAddinKey = "HKCU:\Software\SolidWorks\AddIns\$clsid"
+Remove-Item -Path $swAddinKey -Recurse -Force -ErrorAction SilentlyContinue
+New-Item -Path $swAddinKey -Force | Out-Null
+Set-ItemProperty -Path $swAddinKey -Name "(default)" -Value 1 -Type DWord
+Set-ItemProperty -Path $swAddinKey -Name "Title" -Value "Design Express Res"
+Set-ItemProperty -Path $swAddinKey -Name "Description" -Value "设计标注检查与设计数据查询工具"
+
+$swStartupKey = "HKCU:\Software\SolidWorks\AddInsStartup\$clsid"
+New-Item -Path $swStartupKey -Force | Out-Null
+Set-ItemProperty -Path $swStartupKey -Name "(default)" -Value 1 -Type DWord
+Write-Host "SolidWorks 加载项已注册(启动时自动加载)"
+
+Write-Host ""
+Write-Host "=== 下一步(重要) ==="
+Write-Host "1. 若首次安装, 请以管理员身份导入注册表(加载项清单需要 HKLM):"
+Write-Host "   reg add ""HKLM\SOFTWARE\SolidWorks\AddIns\$clsid"" /ve /t REG_SZ /d 1 /f"
+Write-Host "   reg add ""HKLM\SOFTWARE\SolidWorks\AddIns\$clsid"" /v Title /t REG_SZ /d ""Design Express Res"" /f"
+Write-Host "2. 启动 SolidWorks, 在 工具→插件 中勾选 Design Express Res"
+Write-Host "3. 打开一个零件文档 -> 出现 Design Express Res 选项卡"
+Write-Host "4. 正常退出 SolidWorks 并重新打开(持久化选项卡定义)"
diff --git a/AddIn/src/Core/AppState.cs b/AddIn/src/Core/AppState.cs
new file mode 100644
index 0000000..afce70a
--- /dev/null
+++ b/AddIn/src/Core/AppState.cs
@@ -0,0 +1,96 @@
+using System;
+using System.Collections.Generic;
+
+namespace DesignExpress.Core
+{
+    public class CheckResult
+    {
+        public string Stage;
+        public string Obj;
+        public string CheckID;
+        public string Name;
+        public string Result;
+        public string Note;
+        public string Basis;
+    }
+
+    public static class AppState
+    {
+        public static ICadHost Host;
+        public static List<CheckResult> Results = new List<CheckResult>();
+
+        public static void Add(string stage, string obj, string id, string name,
+                               string result, string note, string basis = "")
+        {
+            Results.Add(new CheckResult
+            {
+                Stage = stage, Obj = obj, CheckID = id, Name = name,
+                Result = result, Note = note, Basis = basis
+            });
+            try
+            {
+                if (Host != null) Host.SetStatusText("[" + stage + "] " + obj + " - " + name);
+            }
+            catch { }
+        }
+
+        public static void Count(out int pass, out int warn, out int fail, out int info)
+        {
+            pass = 0; warn = 0; fail = 0; info = 0;
+            foreach (CheckResult r in Results)
+            {
+                switch (r.Result)
+                {
+                    case "通过": pass++; break;
+                    case "警告": warn++; break;
+                    case "未通过": fail++; break;
+                    default: info++; break;
+                }
+            }
+        }
+
+        public static string GetProp(Dictionary<string, string> props, params string[] names)
+        {
+            if (props == null) return "";
+            foreach (string n in names)
+            {
+                foreach (KeyValuePair<string, string> kv in props)
+                {
+                    if (string.Equals(kv.Key, n, StringComparison.OrdinalIgnoreCase))
+                        return kv.Value ?? "";
+                }
+            }
+            return "";
+        }
+
+        public static bool IsDefaultMaterial(string s)
+        {
+            s = (s ?? "").Trim();
+            return s == "" || s.Equals("默认", StringComparison.OrdinalIgnoreCase) ||
+                   s.Equals("Default", StringComparison.OrdinalIgnoreCase) ||
+                   s.Equals("Generic", StringComparison.OrdinalIgnoreCase);
+        }
+
+        // 在多个文档的属性中搜索关键词
+        public static bool HitKeywords(IEnumerable<DocInfo> docs, string keys, out string hits)
+        {
+            hits = "";
+            string[] kArr = keys.Split(',');
+            foreach (DocInfo d in docs)
+            {
+                if (d == null) continue;
+                string txt = GetProp(d.Props, "Comments", "备注", "注释", "Keywords", "关键词",
+                                     "Description", "描述", "名称", "Title", "标题");
+                foreach (string k in kArr)
+                {
+                    if ((txt + d.Name).ToUpper().Contains(k.ToUpper()))
+                    {
+                        if (hits.Length < 300) hits += d.Name + "[" + k + "]; ";
+                        return true;
+                    }
+                }
+            }
+            return false;
+        }
+    }
+}
diff --git a/AddIn/src/Core/CheckEngine.cs b/AddIn/src/Core/CheckEngine.cs
new file mode 100644
index 0000000..c8417a8
--- /dev/null
+++ b/AddIn/src/Core/CheckEngine.cs
@@ -0,0 +1,667 @@
+using System;
+using System.Collections.Generic;
+using System.Windows.Forms;
+
+namespace DesignExpress.Core
+{
+    // 检查引擎: 只处理 DocSnapshot 纯数据, 不依赖任何 CAD 系统
+    public static class CheckEngine
+    {
+        // ================= 零件阶段 =================
+
+        public static void RunPartChecks(DocSnapshot doc)
+        {
+            string objName = "零件";
+            if (doc.Dirty)
+                AppState.Add("零件", objName, "P01", "文档保存状态", "警告", "存在未保存的修改", "建议检查前保存");
+            else
+                AppState.Add("零件", objName, "P01", "文档保存状态", "通过", "已保存", "");
+
+            CheckPartProps(doc, objName);
+            CheckModelAnnotations(doc, objName);
+            CheckThreads(doc, objName);
+            CheckMaterialContact(doc, objName);
+            AppState.Add("零件", objName, "P15", "焊接标注检查", "信息",
+                "模型焊接符号由工程图 D19 焊接技术要求关键词检查覆盖(双面焊/打磨/标准号)", "spec 文件");
+            CheckSurfaceTreat(doc, objName);
+            CheckStrength(doc, objName);
+            FitCheckLoop(doc);
+        }
+
+        private static void CheckPartProps(DocSnapshot doc, string objName)
+        {
+            string v;
+            v = AppState.GetProp(doc.Props, "Part Number", "零件代号", "零件号", "图号");
+            if (v == "") AppState.Add("零件", objName, "P02", "零件代号", "未通过", "未填写", "标题栏必填项");
+            else AppState.Add("零件", objName, "P02", "零件代号", "通过", v, "");
+
+            v = AppState.GetProp(doc.Props, "Description", "描述", "名称", "部件名称");
+            if (v == "") AppState.Add("零件", objName, "P03", "名称", "未通过", "未填写", "标题栏必填项");
+            else AppState.Add("零件", objName, "P03", "名称", "通过", v, "");
+
+            string mat = doc.MaterialName;
+            if (mat == "") mat = AppState.GetProp(doc.Props, "Material", "材料", "材质");
+            if (AppState.IsDefaultMaterial(mat))
+                AppState.Add("零件", objName, "P04", "材料", "未通过", "材料未指定或为默认", "配合面/接触面必须明确材料");
+            else
+                AppState.Add("零件", objName, "P04", "材料", "通过", mat, "");
+
+            v = AppState.GetProp(doc.Props, "Designer", "设计者", "设计");
+            if (v == "") AppState.Add("零件", objName, "P05", "设计者", "未通过", "未填写", "");
+            else AppState.Add("零件", objName, "P05", "设计者", "通过", v, "");
+
+            v = AppState.GetProp(doc.Props, "Checked By", "检查者", "审核者", "校核");
+            if (v == "") AppState.Add("零件", objName, "P06", "审核者", "未通过", "未填写", "");
+            else AppState.Add("零件", objName, "P06", "审核者", "通过", v, "");
+
+            v = AppState.GetProp(doc.Props, "Revision Number", "修订号", "版本号");
+            if (v == "") AppState.Add("零件", objName, "P07", "修订号", "警告", "未填写修订号", "建议填写以追溯版本");
+            else AppState.Add("零件", objName, "P07", "修订号", "通过", v, "");
+        }
+
+        private static void CheckModelAnnotations(DocSnapshot doc, string objName)
+        {
+            ModelInfo m = doc.Model;
+            if (m == null) m = new ModelInfo();
+            int nDim = m.DimCount, nFcf = m.FcfCount, nTex = m.TexCount, nDat = m.DatumCount, nTn = m.ThreadNoteCount;
+
+            if (nDim < 0)
+                AppState.Add("零件", objName, "P08", "模型标注统计", "信息", "无法读取模型标注", "");
+            else if (nDim == 0)
+                AppState.Add("零件", objName, "P08", "模型标注统计", "警告", "模型上没有任何尺寸标注, 建议使用三维技术标注(PMI)", "设计标注要求");
+            else
+                AppState.Add("零件", objName, "P08", "模型标注统计", "通过",
+                    "模型尺寸 " + nDim + " 个; 形位公差 " + (nFcf < 0 ? "?" : nFcf.ToString()) +
+                    " 个; 粗糙度 " + (nTex < 0 ? "?" : nTex.ToString()) +
+                    " 个; 基准 " + (nDat < 0 ? "?" : nDat.ToString()) +
+                    " 个; 螺纹孔标注 " + (nTn < 0 ? "?" : nTn.ToString()) + " 个", "");
+
+            if (nDim > 0)
+            {
+                if (!m.TolReadable)
+                    AppState.Add("零件", objName, "P08b", "尺寸公差覆盖", "信息", "部分尺寸公差信息无法读取", "");
+                else if (m.TolCount == 0)
+                    AppState.Add("零件", objName, "P08b", "尺寸公差覆盖", "警告", nDim + " 个尺寸均未标注公差", "配合尺寸应标注公差");
+                else
+                    AppState.Add("零件", objName, "P08b", "尺寸公差覆盖", "通过", m.TolCount + "/" + nDim + " 个尺寸带公差", "");
+            }
+
+            if (nFcf < 0)
+                AppState.Add("零件", objName, "P08c", "形位公差标注", "信息", "无法读取", "");
+            else if (nFcf == 0)
+                AppState.Add("零件", objName, "P08c", "形位公差标注", "警告", "模型未标注任何形位公差(如跳动/同轴度/垂直度/平面度)", "关键配合特征应标注形位公差");
+            else
+                AppState.Add("零件", objName, "P08c", "形位公差标注", "通过", "共 " + nFcf + " 个形位公差标注", "");
+
+            if (nTex < 0)
+                AppState.Add("零件", objName, "P08d", "粗糙度标注", "信息", "无法读取", "");
+            else if (nTex == 0)
+                AppState.Add("零件", objName, "P08d", "粗糙度标注", "警告", "模型未标注表面粗糙度", "配合面/密封面应标注粗糙度");
+            else
+                AppState.Add("零件", objName, "P08d", "粗糙度标注", "通过", "共 " + nTex + " 个粗糙度标注(首个: " + m.FirstTexText + ")", "");
+        }
+
+        private static void CheckThreads(DocSnapshot doc, string objName)
+        {
+            ModelInfo m = doc.Model;
+            int n = m == null ? -1 : m.ThreadFeatureCount;
+            if (n < 0)
+                AppState.Add("零件", objName, "P13", "螺纹孔检查", "信息", "无法读取螺纹特征", "");
+            else if (n == 0)
+                AppState.Add("零件", objName, "P13", "螺纹孔检查", "通过", "无螺纹特征", "");
+            else
+                AppState.Add("零件", objName, "P13", "螺纹孔检查", "通过", "共 " + n + " 处螺纹特征(示例: " + m.ThreadDesignation + ")", "螺纹代号/深度/攻深需在工程图中完整标注");
+        }
+
+        private static void CheckMaterialContact(DocSnapshot doc, string objName)
+        {
+            string v = AppState.GetProp(doc.Props, "物料接触", "接触类别", "接触", "ContactClass", "MaterialContact");
+            bool direct = false;
+            if (v != "")
+            {
+                if (v.Contains("直接")) direct = true;
+                AppState.Add("零件", objName, "P14", "物料接触检查", "通过",
+                    direct ? "属性标注: 直接接触 (需满足 GMP 材料/粗糙度/无死角要求)" : "属性标注: " + v,
+                    direct ? "GMP" : "");
+            }
+            else
+            {
+                SimpleInput f = new SimpleInput("物料接触", "该零件是否与物料接触?\r\n1=直接接触\r\n2=间接接触(外表/非接触面)\r\n3=非接触\r\n0=跳过", "1");
+                if (f.ShowDialog() == DialogResult.OK)
+                {
+                    int ans = 0;
+                    int.TryParse(f.Value.Trim(), out ans);
+                    switch (ans)
+                    {
+                        case 1: direct = true;
+                            AppState.Add("零件", objName, "P14", "物料接触检查", "通过", "人工确认: 直接接触", "建议在 iProperties 自定义属性中标注'物料接触=直接接触'以固化");
+                            break;
+                        case 2: AppState.Add("零件", objName, "P14", "物料接触检查", "通过", "人工确认: 间接接触", ""); break;
+                        case 3: AppState.Add("零件", objName, "P14", "物料接触检查", "通过", "人工确认: 非接触", ""); break;
+                        default: AppState.Add("零件", objName, "P14", "物料接触检查", "警告", "未声明物料接触类别, 无法执行 GMP 专项检查", "建议标注接触类别"); break;
+                    }
+                }
+                else
+                    AppState.Add("零件", objName, "P14", "物料接触检查", "警告", "未声明物料接触类别, 无法执行 GMP 专项检查", "建议标注接触类别");
+            }
+
+            if (direct)
+            {
+                string mat = doc.MaterialName;
+                if (mat == "") mat = AppState.GetProp(doc.Props, "Material", "材料", "材质");
+                if (AppState.IsDefaultMaterial(mat))
+                    AppState.Add("零件", objName, "P14b", "GMP 接触材料", "未通过", "材料未指定或为默认", "直接接触物料必须用卫生级不锈钢(316L)");
+                else
+                {
+                    string rec, basis, vv;
+                    vv = KB.GmpMaterialJudge(mat, out rec, out basis);
+                    AppState.Add("零件", objName, "P14b", "GMP 接触材料", vv, "材料: " + mat + "; " + rec, basis);
+                }
+
+                ModelInfo m = doc.Model;
+                int nTex = m == null ? 0 : m.TexCount;
+                if (nTex > 0)
+                    AppState.Add("零件", objName, "P14c", "GMP 接触面粗糙度", "通过", "已标注粗糙度(共 " + nTex + " 个)", "接触面 Ra<=0.8");
+                else
+                    AppState.Add("零件", objName, "P14c", "GMP 接触面粗糙度", "未通过", "接触面未标注粗糙度", "接触面 Ra<=0.8");
+
+                if (m == null || !m.MinFilletReadable)
+                    AppState.Add("零件", objName, "P14d", "GMP 无死角检查", "信息", "无法读取圆角特征", "");
+                else if (m.MinFilletRadiusMM > 0 && m.MinFilletRadiusMM < 10)
+                    AppState.Add("零件", objName, "P14d", "GMP 无死角检查", "警告",
+                        "存在小于 R10 的圆角(最小 R" + m.MinFilletRadiusMM.ToString("0.0") + " mm), 夹角处易积料",
+                        "GMP: 夹角处圆角>=R10, 内夹角>=135度");
+                else
+                    AppState.Add("零件", objName, "P14d", "GMP 无死角检查", "通过",
+                        m.MinFilletRadiusMM > 0 ? "最小圆角 R" + m.MinFilletRadiusMM.ToString("0.0") + " mm >= R10" : "未发现圆角特征, 请人工确认",
+                        "GMP 无死角要求");
+            }
+        }
+
+        private static void CheckSurfaceTreat(DocSnapshot doc, string objName)
+        {
+            string v = AppState.GetProp(doc.Props, "表面处理", "表面", "Surfacing", "镀层", "防锈", "SurfaceTreatment");
+            if (v == "") v = AppState.GetProp(doc.Props, "Comments", "备注", "注释");
+            if (v != "" && (v.Contains("镀") || v.Contains("氧化") || v.Contains("抛光") ||
+                            v.Contains("防锈") || v.Contains("发黑") || v.Contains("喷砂")))
+                AppState.Add("零件", objName, "P16", "表面处理/防锈", "通过", v, "");
+            else
+                AppState.Add("零件", objName, "P16", "表面处理/防锈", "警告", "未标注表面处理/防锈要求(如镀镍是否需磨削/抛光、防锈包装)", "请确认是否适用");
+        }
+
+        private static void CheckStrength(DocSnapshot doc, string objName)
+        {
+            string mat = doc.MaterialName;
+            if (mat == "") mat = AppState.GetProp(doc.Props, "Material", "材料", "材质");
+            if (AppState.IsDefaultMaterial(mat))
+                AppState.Add("零件", objName, "P17", "结构强度/仿真", "未通过", "材料未指定, 无法进行强度分析", "需先指定材料");
+            else
+                AppState.Add("零件", objName, "P17", "结构强度/仿真", "信息",
+                    "材料: " + mat + "; 建议使用 CAD 内置应力分析或导出模型进行有限元/仿真校核", "AI/CAE 校核指引");
+        }
+
+        private static void FitCheckLoop(DocSnapshot doc)
+        {
+            SimpleInput ask = new SimpleInput("公差配合检查", "是否进行公差配合检查?\r\n1=是\r\n0=否(跳过)", "1");
+            if (ask.ShowDialog() != DialogResult.OK) return;
+            int go = 0;
+            int.TryParse(ask.Value.Trim(), out go);
+            if (go != 1)
+            {
+                AppState.Add("零件", "零件", "P09", "公差配合检查", "信息", "用户跳过配合检查", "");
+                return;
+            }
+
+            ICadHost host = AppState.Host;
+            while (true)
+            {
+                double diaMM = 0;
+                string faceName = "手动输入";
+                try
+                {
+                    if (host != null) diaMM = host.PickCylinderDiameterMM(out faceName);
+                }
+                catch { diaMM = 0; }
+                if (diaMM <= 0)
+                {
+                    SimpleInput di = new SimpleInput("公差配合检查", "请输入配合直径 (mm):", "30");
+                    if (di.ShowDialog() != DialogResult.OK) return;
+                    double.TryParse(di.Value.Trim(), out diaMM);
+                    if (diaMM <= 0) return;
+                }
+
+                FitForm form = new FitForm(diaMM, faceName);
+                if (form.ShowDialog() != DialogResult.OK) break;
+
+                foreach (FitItem it in form.Items)
+                {
+                    string verdict = it.Verdict;
+                    int seg = KB.SegIndex(it.DiaMM);
+                    string note = "配合面: " + faceName + "; 直径 " + it.DiaMM.ToString("0.0") + " mm" +
+                        (seg < 0 ? " (>500mm 超出表范围)" : " (尺寸段 " + KB.SegName(seg) + ")") +
+                        "; 实际代码 " + it.Code + "; 推荐 " + it.Recommend + "; " + verdict;
+                    AppState.Add("零件", "零件", "P09", "公差配合检查(" + it.Role + ")", verdict, note, it.Basis);
+                    FitAdjacentChecks(doc, it.Role, it.DiaMM, faceName);
+                }
+
+                if (MessageBox.Show("配合检查结果已加入。是否继续检查其他配合面?", "公差配合检查",
+                    MessageBoxButtons.YesNo, MessageBoxIcon.Question) != DialogResult.Yes)
+                    break;
+            }
+        }
+
+        private static void FitAdjacentChecks(DocSnapshot doc, string role, double diaMM, string faceName)
+        {
+            string objName = "零件(" + faceName + ")";
+            ModelInfo m = doc.Model;
+            int nFcf = m == null ? 0 : m.FcfCount;
+            int nTex = m == null ? 0 : m.TexCount;
+            if (nFcf > 0)
+                AppState.Add("零件", objName, "P10", "配合面形位公差", "通过", "模型已标注形位公差(共 " + nFcf + " 个)", "轴承位建议标注径向跳动/同轴度, 等级 IT5~IT6");
+            else
+                AppState.Add("零件", objName, "P10", "配合面形位公差", "未通过", "配合面未标注形位公差", "轴承轴颈建议标注径向跳动/同轴度(IT5~IT6); 座孔标注同轴度/垂直度");
+
+            if (nTex > 0)
+                AppState.Add("零件", objName, "P11", "配合面粗糙度", "通过", "已标注粗糙度(共 " + nTex + " 个)", "推荐: " + KB.RaSuggest(role));
+            else
+                AppState.Add("零件", objName, "P11", "配合面粗糙度", "未通过", "配合面未标注表面粗糙度", "推荐: " + KB.RaSuggest(role));
+
+            if (role.StartsWith("轴承"))
+            {
+                int seg = KB.SegIndex(diaMM);
+                string tolNote;
+                if (seg > 0)
+                    tolNote = "尺寸段 " + KB.SegName(seg) + " 对应 IT6=" + KB.ItTol(6, seg) + "um, IT7=" + KB.ItTol(7, seg) + "um";
+                else
+                    tolNote = "直径超过 500mm, 无内置数据";
+                AppState.Add("零件", objName, "P12", "轴承位公差等级", "信息", tolNote, "轴承轴颈公差等级一般取 IT5~IT6, 座孔 IT7");
+            }
+        }
+
+        // ================= 装配阶段 =================
+
+        public static void RunAssemblyChecks(DocSnapshot doc)
+        {
+            string objName = "装配";
+            if (doc.Dirty)
+                AppState.Add("装配", objName, "A01", "文档保存状态", "警告", "存在未保存的修改", "");
+            else
+                AppState.Add("装配", objName, "A01", "文档保存状态", "通过", "已保存", "");
+
+            GmpMaterialCheck(doc, objName);
+            SealCheck(doc, objName);
+            CleanCheck(doc, objName);
+            GmpRoughnessCheck(doc, objName);
+            InterferenceCheck(doc, objName);
+            StandardPartsCheck(doc, objName);
+            ElectricsCheck(doc, objName);
+            UtilityCheck(doc, objName);
+            AppState.Add("装配", objName, "A12", "运动干涉(动态)", "信息",
+                "建议使用 CAD 驱动约束/运动仿真验证运动干涉; 本工具提供静态干涉结果", "运动学检查需要仿真环境");
+        }
+
+        private static void GmpMaterialCheck(DocSnapshot doc, string objName)
+        {
+            int nPart = 0, nOk = 0, nWarn = 0, nBad = 0;
+            string badList = "";
+            foreach (DocInfo d in doc.OpenDocs)
+            {
+                if (d == null) continue;
+                nPart++;
+                string rec, basis, v;
+                v = KB.GmpMaterialJudge(d.Material, out rec, out basis);
+                if (v == "合理") nOk++;
+                else if (v == "可接受" || v == "警告") nWarn++;
+                else nBad++;
+                if (v != "合理" && badList.Length < 400)
+                    badList += d.Name + "(" + d.Material + "): " + rec + " | ";
+            }
+            if (nPart == 0)
+                AppState.Add("装配", objName, "A02", "GMP 材料合规", "信息", "未发现已加载的零件文档(仅检查已打开文档)", "");
+            else if (nBad == 0 && nWarn == 0)
+                AppState.Add("装配", objName, "A02", "GMP 材料合规", "通过", "全部 " + nPart + " 个零件材料符合 GMP 要求", "GMP 设备设计规范");
+            else if (nBad == 0)
+                AppState.Add("装配", objName, "A02", "GMP 材料合规", "警告", nWarn + "/" + nPart + " 个零件材料需关注: " + badList, "GMP 设备设计规范");
+            else
+                AppState.Add("装配", objName, "A02", "GMP 材料合规", "未通过", nBad + " 个零件材料不合格, " + nWarn + " 个需关注: " + badList, "GMP 设备设计规范");
+        }
+
+        private static void SealCheck(DocSnapshot doc, string objName)
+        {
+            string names = "";
+            int n = 0;
+            AssemblyInfo asm = doc.Asm;
+            if (asm != null)
+            {
+                foreach (string nm in asm.OccurrenceNames)
+                {
+                    if (KB.IsSealPartName(nm))
+                    {
+                        n++;
+                        if (names.Length < 300) names += nm + "; ";
+                    }
+                }
+            }
+            if (n > 0)
+            {
+                AppState.Add("装配", objName, "A03", "密封件存在性", "通过", "发现 " + n + " 个密封元件: " + names, "GMP 密封要求");
+                AppState.Add("装配", objName, "A04", "密封设计提示", "信息",
+                    "请核对: 密封槽尺寸是否符合 GB/T 3452.3(O型圈槽); 密封材料需符合 FDA 要求; 动密封面 Ra<=0.8", "GB/T 3452.3");
+            }
+            else
+            {
+                DialogResult ans = MessageBox.Show("未在装配中发现密封元件(名称不含 密封圈/O型圈/垫片 等关键词)。\r\n该设备是否需要密封设计?",
+                    "密封检查", MessageBoxButtons.YesNo, MessageBoxIcon.Question);
+                if (ans == DialogResult.Yes)
+                    AppState.Add("装配", objName, "A03", "密封件存在性", "未通过", "未发现密封元件, 需补充密封设计或确认命名规范", "GMP 密封要求");
+                else
+                    AppState.Add("装配", objName, "A03", "密封件存在性", "通过", "无密封要求(用户确认)", "");
+            }
+        }
+
+        private static void CleanCheck(DocSnapshot doc, string objName)
+        {
+            string hits;
+            List<DocInfo> docs = new List<DocInfo>();
+            docs.Add(new DocInfo { Name = doc.DisplayName, Props = doc.Props, Material = doc.MaterialName });
+            docs.AddRange(doc.OpenDocs);
+            if (AppState.HitKeywords(docs, "清洁,清洗,CIP,SIP,死角,排空,卫生,可清洗", out hits))
+                AppState.Add("装配", objName, "A05", "清洁性设计要求", "通过", "已体现清洁性设计说明: " + hits, "GMP 清洁性要求");
+            else
+                AppState.Add("装配", objName, "A05", "清洁性设计要求", "警告", "未在文档属性中发现清洁/清洗/CIP/死角等设计要求说明", "GMP 要求: 设备应可清洁、无死角、易排空");
+        }
+
+        private static void GmpRoughnessCheck(DocSnapshot doc, string objName)
+        {
+            string noTex = "";
+            int nPart = 0, nWith = 0;
+            foreach (DocInfo d in doc.OpenDocs)
+            {
+                if (d == null) continue;
+                nPart++;
+                if (d.TexCount > 0) nWith++;
+                else if (noTex.Length < 300) noTex += d.Name + "; ";
+            }
+            if (nPart == 0)
+                AppState.Add("装配", objName, "A06", "GMP 粗糙度标注", "信息", "未发现已加载的零件文档", "");
+            else if (nWith == nPart)
+                AppState.Add("装配", objName, "A06", "GMP 粗糙度标注", "通过", "所有 " + nPart + " 个零件均标注了粗糙度", "GMP 接触面 Ra<=0.8");
+            else
+                AppState.Add("装配", objName, "A06", "GMP 粗糙度标注", "警告", (nPart - nWith) + "/" + nPart + " 个零件未标注粗糙度: " + noTex, "GMP 接触面 Ra<=0.8; 建议物料接触面电解抛光");
+        }
+
+        private static void InterferenceCheck(DocSnapshot doc, string objName)
+        {
+            AssemblyInfo asm = doc.Asm;
+            if (asm == null)
+            {
+                AppState.Add("装配", objName, "A07", "静态干涉", "信息", "无法读取装配信息", "");
+                return;
+            }
+            if (asm.InterferenceState == 2)
+            {
+                AppState.Add("装配", objName, "A07", "静态干涉", "信息", "干涉分析执行失败(" + asm.InterferenceError + "), 请使用 CAD 自带干涉检查验证", "");
+                return;
+            }
+            if (asm.InterferenceState == 0)
+                AppState.Add("装配", objName, "A07", "静态干涉", "通过", "未发现静态干涉(共检查 " + asm.TopLevelCount + " 个顶层零部件)", "干涉检查");
+            else
+            {
+                string detail = "";
+                for (int j = 0; j < asm.Interferences.Count && detail.Length < 300; j++)
+                {
+                    InterferencePair p = asm.Interferences[j];
+                    detail += p.Name1 + " 与 " + p.Name2 + " 体积 " + p.VolumeCM3.ToString("0.00") + "cm3; ";
+                }
+                AppState.Add("装配", objName, "A07", "静态干涉", "未通过", "发现 " + asm.Interferences.Count + " 处静态干涉: " + detail, "干涉检查");
+            }
+        }
+
+        private static void StandardPartsCheck(DocSnapshot doc, string objName)
+        {
+            AssemblyInfo asm = doc.Asm;
+            string stdNames = "";
+            int stdN = 0, totalN = 0;
+            if (asm != null)
+            {
+                totalN = asm.OccurrenceNames.Count;
+                foreach (string nm in asm.OccurrenceNames)
+                {
+                    if (KB.IsStdPartName(nm))
+                    {
+                        stdN++;
+                        if (stdNames.Length < 200) stdNames += nm + "; ";
+                    }
+                }
+            }
+            if (totalN == 0)
+                AppState.Add("装配", objName, "A09", "外购件优先", "信息", "未统计到零部件", "");
+            else
+            {
+                double ratio = (double)stdN / (double)totalN;
+                AppState.Add("装配", objName, "A09", "外购件优先", "通过",
+                    "标准/外购件 " + stdN + "/" + totalN + " (" + ratio.ToString("0%") + "): " + stdNames, "优先选用标准外购件");
+            }
+        }
+
+        private static void ElectricsCheck(DocSnapshot doc, string objName)
+        {
+            string hits;
+            List<DocInfo> docs = new List<DocInfo>();
+            docs.Add(new DocInfo { Name = doc.DisplayName, Props = doc.Props, Material = doc.MaterialName });
+            docs.AddRange(doc.OpenDocs);
+            if (AppState.HitKeywords(docs, "西门子,SIEMENS,联网,以太网,PROFINET,PLC,IP65,防爆,电气,变频器,伺服", out hits))
+                AppState.Add("装配", objName, "A10", "电气选型/西门子联网", "通过", hits, "电气元件选型技术要求");
+            else
+                AppState.Add("装配", objName, "A10", "电气选型/西门子联网", "警告", "未发现电气选型/西门子联网相关说明", "如涉及电气元件, 需注明选型及联网(如西门子 PROFINET)要求");
+        }
+
+        private static void UtilityCheck(DocSnapshot doc, string objName)
+        {
+            string hits;
+            List<DocInfo> docs = new List<DocInfo>();
+            docs.Add(new DocInfo { Name = doc.DisplayName, Props = doc.Props, Material = doc.MaterialName });
+            docs.AddRange(doc.OpenDocs);
+            if (AppState.HitKeywords(docs, "施工,动力,公用工程,压缩空气,纯化水,蒸汽,排风,水电气,安装要求,配孔,吊顶", out hits))
+                AppState.Add("装配", objName, "A11", "施工/公共动力系统", "通过", hits, "施工及公用动力安装技术要求");
+            else
+                AppState.Add("装配", objName, "A11", "施工/公共动力系统", "警告", "未发现施工/公共动力系统相关说明(压缩空气/纯化水/蒸汽/排风/配孔/吊顶等)", "如涉及需补充技术要求");
+        }
+
+        // ================= 工程图阶段 =================
+
+        private class SpecGroup
+        {
+            public string ID;
+            public string Name;
+            public string Keys;
+        }
+
+        private static readonly SpecGroup[] Specs = new SpecGroup[]
+        {
+            new SpecGroup { ID = "D18", Name = "物料接触类别声明", Keys = "接触,物料接触,直接接触,间接接触,接触类别" },
+            new SpecGroup { ID = "D19", Name = "焊接技术要求", Keys = "焊接,双面焊,单面焊,打磨,焊缝,焊接标准" },
+            new SpecGroup { ID = "D20", Name = "死角/夹角要求", Keys = "死角,无死角,夹角,圆角,清洁,排空,R10,135" },
+            new SpecGroup { ID = "D21", Name = "公差要求完整性", Keys = "公差,配合,精度,未注公差" },
+            new SpecGroup { ID = "D22", Name = "轴承位公差标注", Keys = "轴承,跳动,同轴,旋转精度" },
+            new SpecGroup { ID = "D23", Name = "螺纹孔标注", Keys = "螺纹,螺孔,攻丝,丝锥,M6,M8,M10,M12,M16" },
+            new SpecGroup { ID = "D24", Name = "表面处理/镀镍", Keys = "镀镍,镀铬,镀锌,电镀,抛光,表面处理,磨床,磨削,防锈,发黑,阳极氧化" },
+            new SpecGroup { ID = "D25", Name = "平面度/平行度", Keys = "平面度,平行度,垂直度" },
+            new SpecGroup { ID = "D26", Name = "特殊角度管加工", Keys = "角度管,弯管,折弯,倾斜,特殊角度" },
+            new SpecGroup { ID = "D27", Name = "装配治具与检验", Keys = "治具,检具,检验,检测,夹具" },
+            new SpecGroup { ID = "D28", Name = "加工辅助件要求", Keys = "辅助件,工艺,毛坯,余量,加工基准" },
+            new SpecGroup { ID = "D29", Name = "外购件优先", Keys = "外购,标准件,优先采购" },
+            new SpecGroup { ID = "D30", Name = "测试要求", Keys = "测试,试验,试压,气密,检漏,出厂测试" },
+            new SpecGroup { ID = "D31", Name = "装配要求", Keys = "装配,安装,扭矩,紧固,间隙" },
+            new SpecGroup { ID = "D32", Name = "防锈要求", Keys = "防锈,防锈油,防锈剂,包装,海运,真空包装" },
+            new SpecGroup { ID = "D33", Name = "施工/公共动力系统", Keys = "施工,动力,公用工程,水电气,压缩空气,蒸汽,纯化水,排风" },
+            new SpecGroup { ID = "D34", Name = "配孔技术要求", Keys = "配孔,配钻,现场配,扩孔" },
+            new SpecGroup { ID = "D35", Name = "吊顶配件要求", Keys = "吊顶,吊架,吊装,悬挂" },
+            new SpecGroup { ID = "D36", Name = "电气元件选型", Keys = "电气,元件,选型,防爆,防护等级,IP65" },
+            new SpecGroup { ID = "D37", Name = "西门子联网器件", Keys = "西门子,SIEMENS,联网,以太网,PROFINET,总线" },
+            new SpecGroup { ID = "D38", Name = "结构强度/仿真", Keys = "强度,仿真,有限元,FEA,应力" },
+            new SpecGroup { ID = "D39", Name = "夹角R10/135度确认", Keys = "夹角,135,R10,圆角" }
+        };
+
+        public static void RunDrawingChecks(DocSnapshot doc)
+        {
+            string objName = "工程图";
+            if (doc.Dirty)
+                AppState.Add("工程图", objName, "D00", "文档保存状态", "警告", "存在未保存的修改", "");
+            else
+                AppState.Add("工程图", objName, "D00", "文档保存状态", "通过", "已保存", "");
+
+            int idx = 0;
+            foreach (SheetInfo sh in doc.Sheets)
+            {
+                idx++;
+                CheckSheet(doc, sh, idx);
+            }
+            RunSpecChecks(doc);
+        }
+
+        private static void CheckSheet(DocSnapshot doc, SheetInfo sh, int idx)
+        {
+            string objName = "图纸" + idx + "(" + sh.Name + ")";
+
+            if (!sh.HasBorder && !sh.HasTitleBlock)
+                AppState.Add("工程图", objName, "D01", "图框", "未通过", "图纸没有图框/标题栏", "");
+            else if (!sh.HasTitleBlock)
+                AppState.Add("工程图", objName, "D01", "图框", "警告", "有图框但无标题栏", "");
+            else
+                AppState.Add("工程图", objName, "D01", "图框", "通过", "标题栏: " + sh.TitleBlockName, "");
+
+            CheckTitleBlockProps(doc, objName);
+
+            int nViews = sh.ViewCount;
+            int nAnn = sh.DimCount + sh.FcfCount + sh.TexCount + sh.CenterlineCount + sh.BalloonCount + sh.NotesTexts.Count;
+            if (nViews == 0 && nAnn == 0)
+                AppState.Add("工程图", objName, "D03", "空白图纸", "未通过", "图纸无视图且无任何标注", "");
+            else
+                AppState.Add("工程图", objName, "D03", "空白图纸", "通过", "视图 " + nViews + " 个, 标注 " + nAnn + " 个", "");
+
+            if (sh.UpdateError > 0)
+                AppState.Add("工程图", objName, "D04", "视图更新状态", "未通过", sh.UpdateError + " 个视图更新出错", "");
+            else if (sh.UpdateNeeded > 0)
+                AppState.Add("工程图", objName, "D04", "视图更新状态", "未通过", sh.UpdateNeeded + " 个视图需要更新", "出图前必须更新视图");
+            else
+                AppState.Add("工程图", objName, "D04", "视图更新状态", "通过", "所有视图已更新", "");
+
+            AppState.Add("工程图", objName, "D05", "剖视图统计", "通过", "共 " + sh.SectionCount + " 个剖视图", "剖视图需带剖面线及剖切位置标注");
+
+            if (sh.BorderRect != null)
+            {
+                int nOut = 0;
+                foreach (RectD r in sh.ViewRects)
+                {
+                    if (RectOut(r, sh.BorderRect, 0.5)) nOut++;
+                }
+                if (nOut > 0)
+                    AppState.Add("工程图", objName, "D06", "视图越界", "未通过", nOut + " 个视图超出图框", "");
+                else
+                    AppState.Add("工程图", objName, "D06", "视图越界", "通过", "视图均在图框内", "");
+            }
+            else
+                AppState.Add("工程图", objName, "D06", "视图越界", "信息", "无图框可参考, 跳过", "");
+
+            AppState.Add("工程图", objName, "D07", "尺寸数量", "通过", "共 " + sh.DimCount + " 个尺寸", "");
+            if (sh.DimCount == 0)
+                AppState.Add("工程图", objName, "D08", "尺寸公差", "信息", "无尺寸可统计", "");
+            else if (sh.DimTolCount == 0 && sh.DimCount >= 5)
+                AppState.Add("工程图", objName, "D08", "尺寸公差", "警告", "共 " + sh.DimCount + " 个尺寸均未标注公差", "配合/关键尺寸必须标注公差");
+            else
+                AppState.Add("工程图", objName, "D08", "尺寸公差", "通过", sh.DimTolCount + "/" + sh.DimCount + " 个尺寸带公差", "");
+            if (sh.DimQuestionCount > 0)
+                AppState.Add("工程图", objName, "D09", "尺寸文本异常", "未通过", sh.DimQuestionCount + " 个尺寸文本含\"?\"(测量失败或未更新)", "");
+            else
+                AppState.Add("工程图", objName, "D09", "尺寸文本异常", "通过", "尺寸文本正常", "");
+
+            AppState.Add("工程图", objName, "D10", "形位公差", "通过", "共 " + sh.FcfCount + " 个", "");
+            AppState.Add("工程图", objName, "D11", "基准符号", "信息", "CAD API 不支持自动读取基准符号, 请人工核对", "");
+            AppState.Add("工程图", objName, "D12", "表面粗糙度", "通过", "共 " + sh.TexCount + " 个", "");
+            AppState.Add("工程图", objName, "D13", "焊接符号", "信息", "CAD API 不支持自动读取焊接符号, 由 D19 焊接技术要求关键词检查覆盖", "spec 文件");
+            AppState.Add("工程图", objName, "D14", "孔标注", "信息", "CAD API 不支持自动读取孔标注, 由 D23 螺纹孔关键词检查覆盖", "spec 文件");
+            AppState.Add("工程图", objName, "D15", "中心线/件号", "通过", "中心线 " + sh.CenterlineCount + " 个, 件号 " + sh.BalloonCount + " 个", "");
+
+            if (sh.BorderRect != null)
+            {
+                int nOut = 0;
+                string firstNote = "";
+                foreach (RectD r in sh.FcfRects)
+                {
+                    if (RectOut(r, sh.BorderRect, 0.2)) { nOut++; if (firstNote == "") firstNote = "形位公差"; }
+                }
+                foreach (RectD r in sh.TexRects)
+                {
+                    if (RectOut(r, sh.BorderRect, 0.2)) { nOut++; if (firstNote == "") firstNote = "粗糙度"; }
+                }
+                if (nOut > 0)
+                    AppState.Add("工程图", objName, "D16", "标注越界", "未通过", nOut + " 个标注超出图框, 如: " + firstNote, "");
+                else
+                    AppState.Add("工程图", objName, "D16", "标注越界", "通过", "标注均在图框内", "");
+            }
+            else
+                AppState.Add("工程图", objName, "D16", "标注越界", "信息", "无图框可参考, 跳过", "");
+
+            AppState.Add("工程图", objName, "D17", "图幅", "信息", sh.SheetWidth + " x " + sh.SheetHeight + " (cm)", "");
+        }
+
+        private static bool RectOut(RectD r, RectD b, double margin)
+        {
+            if (r == null || b == null) return false;
+            return (r.L < b.L - margin) || (r.T < b.T - margin) || (r.R > b.R + margin) || (r.B > b.B + margin);
+        }
+
+        private static void CheckTitleBlockProps(DocSnapshot doc, string objName)
+        {
+            string missing = "";
+            string v = AppState.GetProp(doc.Props, "Part Number", "零件代号", "零件号", "图号");
+            if (v == "") missing += "零件代号/图号 ";
+            v = AppState.GetProp(doc.Props, "Description", "描述", "名称", "部件名称");
+            if (v == "") missing += "名称 ";
+            v = AppState.GetProp(doc.Props, "Material", "材料", "材质");
+            if (v == "") missing += "材料 ";
+            v = AppState.GetProp(doc.Props, "Designer", "设计者", "设计");
+            if (v == "") missing += "设计者 ";
+            v = AppState.GetProp(doc.Props, "Checked By", "检查者", "审核者", "校核");
+            if (v == "") missing += "审核者 ";
+            v = AppState.GetProp(doc.Props, "Revision Number", "修订号", "版本号");
+            if (v == "") missing += "修订号 ";
+            if (missing == "")
+                AppState.Add("工程图", objName, "D02", "标题栏属性", "通过", "图号/名称/材料/设计者/审核者/修订号 均已填写", "");
+            else
+                AppState.Add("工程图", objName, "D02", "标题栏属性", "未通过", "未填写: " + missing, "标题栏信息完整性");
+        }
+
+        private static void RunSpecChecks(DocSnapshot doc)
+        {
+            string notes = "";
+            foreach (SheetInfo sh in doc.Sheets)
+            {
+                foreach (string t in sh.NotesTexts)
+                    notes += " " + t;
+            }
+            notes += " " + AppState.GetProp(doc.Props, "Comments", "备注", "注释", "Keywords", "关键词", "Description", "描述");
+
+            foreach (SpecGroup g in Specs)
+            {
+                string[] keys = g.Keys.Split(',');
+                bool found = false;
+                string hitKey = "";
+                foreach (string k in keys)
+                {
+                    if (notes.ToUpper().Contains(k.ToUpper()))
+                    {
+                        found = true;
+                        hitKey = k;
+                        break;
+                    }
+                }
+                if (found)
+                    AppState.Add("工程图", "工程图", g.ID, g.Name, "通过", "图纸中已标注相关要求(关键词: " + hitKey + ")", "spec 文件");
+                else
+                    AppState.Add("工程图", "工程图", g.ID, g.Name, "警告", "图纸技术要求中未发现[" + g.Name + "]相关要求, 如适用请补充标注或人工确认", "spec 文件");
+            }
+        }
+    }
+}
diff --git a/AddIn/src/Core/Checks.cs b/AddIn/src/Core/Checks.cs
new file mode 100644
index 0000000..76240df
--- /dev/null
+++ b/AddIn/src/Core/Checks.cs
@@ -0,0 +1,115 @@
+using System;
+using System.Windows.Forms;
+
+namespace DesignExpress.Core
+{
+    // Core 统一入口: 供各 CAD Link 调用(Inventor/Creo/SolidWorks)
+    public static class Checks
+    {
+        private static MainForm mForm;
+
+        private static void EnsureForm()
+        {
+            if (mForm == null || mForm.IsDisposed)
+                mForm = new MainForm();
+        }
+
+        private static bool Prepare(out DocSnapshot snap, params string[] allowKinds)
+        {
+            snap = null;
+            ICadHost host = AppState.Host;
+            if (host == null) return false;
+            object doc = host.GetActiveDocument();
+            if (doc == null)
+            {
+                MessageBox.Show("请先打开文档", "Design Express Res", MessageBoxButtons.OK, MessageBoxIcon.Exclamation);
+                return false;
+            }
+            string kind = host.GetDocType(doc);
+            bool ok = false;
+            foreach (string k in allowKinds)
+            {
+                if (kind == k) ok = true;
+            }
+            if (!ok)
+            {
+                MessageBox.Show("当前文档类型不支持该检查", "Design Express Res", MessageBoxButtons.OK, MessageBoxIcon.Exclamation);
+                return false;
+            }
+            try { snap = host.Capture(doc); }
+            catch (Exception ex)
+            {
+                MessageBox.Show("读取文档失败: " + ex.Message, "Design Express Res", MessageBoxButtons.OK, MessageBoxIcon.Error);
+                return false;
+            }
+            return snap != null;
+        }
+
+        public static void PartCheck()
+        {
+            DocSnapshot snap;
+            if (!Prepare(out snap, "Part", "Assembly")) return;
+            EnsureForm();
+            mForm.Show();
+            mForm.Activate();
+            mForm.RunAndLoad("零件", delegate { CheckEngine.RunPartChecks(snap); });
+        }
+
+        public static void AssemblyCheck()
+        {
+            DocSnapshot snap;
+            if (!Prepare(out snap, "Assembly")) return;
+            EnsureForm();
+            mForm.Show();
+            mForm.Activate();
+            mForm.RunAndLoad("装配", delegate { CheckEngine.RunAssemblyChecks(snap); });
+        }
+
+        public static void DrawingCheck()
+        {
+            DocSnapshot snap;
+            if (!Prepare(out snap, "Drawing")) return;
+            EnsureForm();
+            mForm.Show();
+            mForm.Activate();
+            mForm.RunAndLoad("工程图", delegate { CheckEngine.RunDrawingChecks(snap); });
+        }
+
+        public static void ExportReport()
+        {
+            if (AppState.Results.Count == 0)
+            {
+                MessageBox.Show("暂无检查结果, 请先执行检查", "Design Express Res", MessageBoxButtons.OK, MessageBoxIcon.Information);
+                return;
+            }
+            SaveFileDialog dlg = new SaveFileDialog();
+            dlg.Title = "保存检查报告";
+            dlg.Filter = "Excel 报告 (*.xlsx)|*.xlsx|CSV 报告 (*.csv)|*.csv";
+            dlg.FileName = "检查报告_" + DateTime.Now.ToString("yyyyMMdd_HHmmss") + ".xlsx";
+            if (dlg.ShowDialog() == DialogResult.OK)
+            {
+                string file = dlg.FileName.ToLower().EndsWith(".csv") ? Report.WriteCsv(dlg.FileName) : Report.WriteExcel(dlg.FileName);
+                MessageBox.Show("报告已生成: " + file, "Design Express Res", MessageBoxButtons.OK, MessageBoxIcon.Information);
+            }
+        }
+
+        public static void Help()
+        {
+            MessageBox.Show(
+                "Design Express Res v" + Report.ToolVersion + "\r\n\r\n" +
+                "零件检查: 标注统计、公差配合(GB/T 275)、形位公差、粗糙度、螺纹孔、物料接触 GMP、表面处理、强度指引\r\n" +
+                "装配检查: GMP 材料、密封件、清洁性、粗糙度、静态干涉、外购件、电气/西门子、动力系统\r\n" +
+                "工程图检查: 图框/标题栏、视图更新、尺寸公差、标注统计、22 项 spec 技术要求关键词检查\r\n\r\n" +
+                "架构: Core 独立核心库 + 各 CAD Link 适配层(Inventor/Creo/SolidWorks), 类似 COMSOL LiveLink。\r\n" +
+                "报告输出为 Excel(汇总/明细/检查项清单), Excel 不可用时输出 CSV。",
+                "使用说明", MessageBoxButtons.OK, MessageBoxIcon.Information);
+        }
+
+        // ============ 设计数据查询工具入口(独立系统) ============
+
+        public static void CirclipQuery() { QueryForm.ShowQuery(0); }
+        public static void KeywayQuery() { QueryForm.ShowQuery(1); }
+        public static void OringQuery() { QueryForm.ShowQuery(2); }
+        public static void BearingRingQuery() { QueryForm.ShowQuery(3); }
+    }
+}
diff --git a/AddIn/src/Core/DesignQuery.cs b/AddIn/src/Core/DesignQuery.cs
new file mode 100644
index 0000000..8606e25
--- /dev/null
+++ b/AddIn/src/Core/DesignQuery.cs
@@ -0,0 +1,208 @@
+using System;
+using System.Collections.Generic;
+
+namespace DesignExpress.Core
+{
+    public class QueryRow
+    {
+        public string Item;
+        public string Value;
+        public string Std;
+        public string Remark;
+    }
+
+    public enum QueryKind
+    {
+        Circlip = 0,   // 卡簧槽 GB/T 894.1
+        Keyway = 1,    // 键槽 GB/T 1095
+        Oring = 2,     // O 型密封圈 GB/T 3452.1 (规划中)
+        BearingRing = 3 // 轴承挡圈 (规划中)
+    }
+
+    // 设计尺寸查询数据引擎: 纯数据表查询, 与 CAD 无关
+    // 注: 数据为常用参考值, 正式设计请核对最新版标准
+    public static class DesignQuery
+    {
+        private const string DISCLAIMER = "参考值, 以最新标准为准";
+
+        // ================= 键槽 (GB/T 1095) =================
+
+        private class KeywayRow
+        {
+            public double Dmin, Dmax;
+            public string KeySize;      // b×h
+            public double T1, T2;       // 轴槽深, 轮毂槽深
+            public string LRange;       // 键长范围
+        }
+
+        private static readonly KeywayRow[] Keyways = new KeywayRow[]
+        {
+            new KeywayRow { Dmin=6, Dmax=8, KeySize="2×2", T1=1.2, T2=1.0, LRange="6~20" },
+            new KeywayRow { Dmin=8, Dmax=10, KeySize="3×3", T1=1.8, T2=1.4, LRange="6~36" },
+            new KeywayRow { Dmin=10, Dmax=12, KeySize="4×4", T1=2.5, T2=1.8, LRange="8~45" },
+            new KeywayRow { Dmin=12, Dmax=17, KeySize="5×5", T1=3.0, T2=2.3, LRange="10~56" },
+            new KeywayRow { Dmin=17, Dmax=22, KeySize="6×6", T1=3.5, T2=2.8, LRange="14~70" },
+            new KeywayRow { Dmin=22, Dmax=30, KeySize="8×7", T1=4.0, T2=3.3, LRange="18~90" },
+            new KeywayRow { Dmin=30, Dmax=38, KeySize="10×8", T1=5.0, T2=3.3, LRange="22~110" },
+            new KeywayRow { Dmin=38, Dmax=44, KeySize="12×8", T1=5.0, T2=3.3, LRange="28~140" },
+            new KeywayRow { Dmin=44, Dmax=50, KeySize="14×9", T1=5.5, T2=3.8, LRange="36~160" },
+            new KeywayRow { Dmin=50, Dmax=58, KeySize="16×10", T1=6.0, T2=4.3, LRange="45~180" },
+            new KeywayRow { Dmin=58, Dmax=65, KeySize="18×11", T1=7.0, T2=4.4, LRange="50~200" },
+            new KeywayRow { Dmin=65, Dmax=75, KeySize="20×12", T1=7.5, T2=4.9, LRange="56~220" },
+            new KeywayRow { Dmin=75, Dmax=85, KeySize="22×14", T1=9.0, T2=5.4, LRange="63~250" },
+            new KeywayRow { Dmin=85, Dmax=95, KeySize="25×14", T1=9.0, T2=5.4, LRange="70~280" },
+            new KeywayRow { Dmin=95, Dmax=110, KeySize="28×16", T1=10.0, T2=6.4, LRange="80~320" },
+            new KeywayRow { Dmin=110, Dmax=130, KeySize="32×18", T1=11.0, T2=7.4, LRange="90~360" },
+            new KeywayRow { Dmin=130, Dmax=150, KeySize="36×20", T1=12.0, T2=8.4, LRange="100~400" },
+            new KeywayRow { Dmin=150, Dmax=170, KeySize="40×22", T1=13.0, T2=9.4, LRange="100~400" },
+            new KeywayRow { Dmin=170, Dmax=200, KeySize="45×25", T1=15.0, T2=10.4, LRange="110~450" },
+            new KeywayRow { Dmin=200, Dmax=230, KeySize="50×28", T1=17.0, T2=11.4, LRange="125~500" },
+            new KeywayRow { Dmin=230, Dmax=260, KeySize="56×32", T1=20.0, T2=12.4, LRange="140~500" },
+            new KeywayRow { Dmin=260, Dmax=290, KeySize="63×32", T1=20.0, T2=12.4, LRange="160~500" },
+            new KeywayRow { Dmin=290, Dmax=330, KeySize="70×36", T1=22.0, T2=14.4, LRange="180~500" },
+            new KeywayRow { Dmin=330, Dmax=380, KeySize="80×40", T1=25.0, T2=15.4, LRange="200~500" },
+            new KeywayRow { Dmin=380, Dmax=440, KeySize="90×45", T1=28.0, T2=17.4, LRange="220~500" },
+            new KeywayRow { Dmin=440, Dmax=500, KeySize="100×50", T1=31.0, T2=19.5, LRange="250~500" }
+        };
+
+        private static readonly double[] KeyLenSeries =
+        { 6, 8, 10, 12, 14, 16, 18, 20, 22, 25, 28, 32, 36, 40, 45, 50, 56, 63, 70, 80, 90, 100,
+          110, 125, 140, 160, 180, 200, 220, 250, 280, 320, 360, 400, 450, 500 };
+
+        private static List<QueryRow> QueryKeyway(double d)
+        {
+            List<QueryRow> rows = new List<QueryRow>();
+            KeywayRow hit = null;
+            foreach (KeywayRow k in Keyways)
+            {
+                if (d > k.Dmin && d <= k.Dmax) { hit = k; break; }
+            }
+            if (hit == null)
+            {
+                rows.Add(new QueryRow { Item = "查询结果", Value = "超出数据范围", Std = "GB/T 1095", Remark = "支持轴径 6~500mm" });
+                return rows;
+            }
+            rows.Add(new QueryRow { Item = "适用轴径 d", Value = ">" + hit.Dmin + "~" + hit.Dmax, Std = "GB/T 1095", Remark = "" });
+            rows.Add(new QueryRow { Item = "键公称尺寸 b×h", Value = hit.KeySize, Std = "GB/T 1095", Remark = "" });
+            rows.Add(new QueryRow { Item = "轴槽深 t1", Value = hit.T1.ToString("0.0"), Std = "GB/T 1095", Remark = "轴直径 - t1 = 槽底直径" });
+            rows.Add(new QueryRow { Item = "轮毂槽深 t2", Value = hit.T2.ToString("0.0"), Std = "GB/T 1095", Remark = "孔直径 + t2 = 槽底直径" });
+            rows.Add(new QueryRow { Item = "键长范围 L", Value = hit.LRange, Std = "GB/T 1095", Remark = "从标准长度系列选取" });
+
+            // 长度系列中落在范围内的
+            double lo = 0, hi = 0;
+            string[] parts = hit.LRange.Split('~');
+            double.TryParse(parts[0], out lo);
+            double.TryParse(parts[1], out hi);
+            List<string> sel = new List<string>();
+            foreach (double len in KeyLenSeries)
+            {
+                if (len >= lo && len <= hi) sel.Add(len.ToString("0"));
+            }
+            rows.Add(new QueryRow { Item = "可用键长", Value = string.Join(", ", sel.ToArray()), Std = "GB/T 1095", Remark = DISCLAIMER });
+            return rows;
+        }
+
+        // ================= 卡簧槽 - 轴用弹性挡圈 (GB/T 894.1 A型) =================
+
+        private class CirclipRow
+        {
+            public double D;      // 轴径
+            public double OD;     // 挡圈外径
+            public double Depth;  // 槽深
+            public double SlotW;  // 槽宽
+        }
+
+        private static readonly CirclipRow[] Circlips = new CirclipRow[]
+        {
+            new CirclipRow { D=3, OD=8.2, Depth=0.4, SlotW=0.6 },
+            new CirclipRow { D=4, OD=9.6, Depth=0.4, SlotW=0.6 },
+            new CirclipRow { D=5, OD=11.0, Depth=0.5, SlotW=0.7 },
+            new CirclipRow { D=6, OD=13.0, Depth=0.7, SlotW=0.9 },
+            new CirclipRow { D=7, OD=14.5, Depth=0.7, SlotW=0.9 },
+            new CirclipRow { D=8, OD=16.0, Depth=0.7, SlotW=0.9 },
+            new CirclipRow { D=9, OD=17.5, Depth=0.8, SlotW=1.0 },
+            new CirclipRow { D=10, OD=19.0, Depth=0.8, SlotW=1.0 },
+            new CirclipRow { D=11, OD=21.0, Depth=0.8, SlotW=1.0 },
+            new CirclipRow { D=12, OD=22.5, Depth=0.9, SlotW=1.2 },
+            new CirclipRow { D=13, OD=24.0, Depth=0.9, SlotW=1.2 },
+            new CirclipRow { D=14, OD=25.5, Depth=0.9, SlotW=1.2 },
+            new CirclipRow { D=15, OD=27.0, Depth=0.9, SlotW=1.2 },
+            new CirclipRow { D=16, OD=28.5, Depth=1.0, SlotW=1.2 },
+            new CirclipRow { D=17, OD=30.0, Depth=1.0, SlotW=1.2 },
+            new CirclipRow { D=18, OD=32.0, Depth=1.1, SlotW=1.5 },
+            new CirclipRow { D=19, OD=33.5, Depth=1.1, SlotW=1.5 },
+            new CirclipRow { D=20, OD=35.0, Depth=1.1, SlotW=1.5 },
+            new CirclipRow { D=21, OD=36.5, Depth=1.1, SlotW=1.5 },
+            new CirclipRow { D=22, OD=38.0, Depth=1.1, SlotW=1.5 },
+            new CirclipRow { D=24, OD=41.0, Depth=1.2, SlotW=1.5 },
+            new CirclipRow { D=25, OD=42.5, Depth=1.2, SlotW=1.5 },
+            new CirclipRow { D=26, OD=44.0, Depth=1.2, SlotW=1.5 },
+            new CirclipRow { D=28, OD=47.0, Depth=1.3, SlotW=1.8 },
+            new CirclipRow { D=30, OD=50.0, Depth=1.3, SlotW=1.8 },
+            new CirclipRow { D=32, OD=53.0, Depth=1.4, SlotW=1.8 },
+            new CirclipRow { D=34, OD=56.0, Depth=1.4, SlotW=1.8 },
+            new CirclipRow { D=35, OD=57.5, Depth=1.4, SlotW=1.8 },
+            new CirclipRow { D=36, OD=59.0, Depth=1.5, SlotW=2.0 },
+            new CirclipRow { D=38, OD=62.0, Depth=1.5, SlotW=2.0 },
+            new CirclipRow { D=40, OD=65.0, Depth=1.5, SlotW=2.0 },
+            new CirclipRow { D=42, OD=68.0, Depth=1.6, SlotW=2.0 },
+            new CirclipRow { D=45, OD=72.0, Depth=1.6, SlotW=2.0 },
+            new CirclipRow { D=48, OD=76.0, Depth=1.6, SlotW=2.0 },
+            new CirclipRow { D=50, OD=79.0, Depth=1.7, SlotW=2.5 }
+        };
+
+        private static List<QueryRow> QueryCirclip(double d)
+        {
+            List<QueryRow> rows = new List<QueryRow>();
+            CirclipRow hit = null;
+            foreach (CirclipRow c in Circlips)
+            {
+                if (Math.Abs(c.D - d) < 0.001) { hit = c; break; }
+            }
+            if (hit == null)
+            {
+                // 未精确匹配: 取最接近的相邻挡圈
+                CirclipRow lower = null, upper = null;
+                foreach (CirclipRow c in Circlips)
+                {
+                    if (c.D < d && (lower == null || c.D > lower.D)) lower = c;
+                    if (c.D > d && (upper == null || c.D < upper.D)) upper = c;
+                }
+                if (lower == null && upper == null)
+                {
+                    rows.Add(new QueryRow { Item = "查询结果", Value = "超出数据范围", Std = "GB/T 894.1", Remark = "支持轴径 3~50mm" });
+                    return rows;
+                }
+                rows.Add(new QueryRow { Item = "查询结果", Value = "非标准轴径, 请就近选用", Std = "GB/T 894.1", Remark = DISCLAIMER });
+                if (lower != null)
+                    rows.Add(new QueryRow { Item = "小于轴径的挡圈", Value = "d=" + lower.D + " 外径D=" + lower.OD + " 槽深t=" + lower.Depth + " 槽宽m=" + lower.SlotW, Std = "GB/T 894.1", Remark = "" });
+                if (upper != null)
+                    rows.Add(new QueryRow { Item = "大于轴径的挡圈", Value = "d=" + upper.D + " 外径D=" + upper.OD + " 槽深t=" + upper.Depth + " 槽宽m=" + upper.SlotW, Std = "GB/T 894.1", Remark = "" });
+                return rows;
+            }
+            rows.Add(new QueryRow { Item = "轴径 d", Value = hit.D.ToString("0"), Std = "GB/T 894.1", Remark = "A 型轴用弹性挡圈" });
+            rows.Add(new QueryRow { Item = "挡圈外径 D", Value = hit.OD.ToString("0.0"), Std = "GB/T 894.1", Remark = "" });
+            rows.Add(new QueryRow { Item = "沟槽直径 d1", Value = (hit.D - 2 * hit.Depth).ToString("0.0"), Std = "GB/T 894.1", Remark = "槽底直径 = d - 2t" });
+            rows.Add(new QueryRow { Item = "沟槽深度 t", Value = hit.Depth.ToString("0.0"), Std = "GB/T 894.1", Remark = "" });
+            rows.Add(new QueryRow { Item = "沟槽宽度 m", Value = hit.SlotW.ToString("0.0"), Std = "GB/T 894.1", Remark = "" });
+            rows.Add(new QueryRow { Item = "安装说明", Value = "挡圈装入沟槽后应贴合槽底", Std = "GB/T 894.1", Remark = DISCLAIMER });
+            return rows;
+        }
+
+        // ================= 统一入口 =================
+
+        public static List<QueryRow> Query(QueryKind kind, double d)
+        {
+            switch (kind)
+            {
+                case QueryKind.Keyway: return QueryKeyway(d);
+                case QueryKind.Circlip: return QueryCirclip(d);
+                default:
+                    return new List<QueryRow>
+                    {
+                        new QueryRow { Item = "查询结果", Value = "模块开发中", Std = "GB/T 3452.1", Remark = "" }
+                    };
+            }
+        }
+    }
+}
diff --git a/AddIn/src/Core/FitForm.cs b/AddIn/src/Core/FitForm.cs
new file mode 100644
index 0000000..c0ef6d9
--- /dev/null
+++ b/AddIn/src/Core/FitForm.cs
@@ -0,0 +1,199 @@
+using System;
+using System.Collections.Generic;
+using System.Drawing;
+using System.Windows.Forms;
+
+namespace DesignExpress.Core
+{
+    public class FitItem
+    {
+        public string Role;
+        public string Code;
+        public double DiaMM;
+        public int Load;
+        public int Purpose;
+        public string Verdict;
+        public string Recommend;
+        public string Basis;
+    }
+
+    // 公差配合检查对话框
+    public class FitForm : Form
+    {
+        public List<FitItem> Items = new List<FitItem>();
+
+        private ComboBox cboRole, cboLoad, cboPurpose;
+        private TextBox txtDia, txtCode;
+        private Label lblResult;
+        private ListBox lst;
+        private Button btnCheck, btnDone;
+        private double _diaMM;
+        private string _faceName;
+
+        public FitForm(double diaMM, string faceName)
+        {
+            _diaMM = diaMM;
+            _faceName = faceName;
+            BuildUI();
+        }
+
+        private void BuildUI()
+        {
+            Text = "公差配合检查 - 设计标注检查工具";
+            FormBorderStyle = FormBorderStyle.FixedDialog;
+            MaximizeBox = false;
+            MinimizeBox = false;
+            StartPosition = FormStartPosition.CenterScreen;
+            ClientSize = new Size(640, 480);
+
+            int y = 12;
+            Label lblFace = new Label();
+            lblFace.Text = "配合面: " + _faceName + "  直径: " + _diaMM.ToString("0.0") + " mm";
+            lblFace.Location = new Point(12, y); lblFace.AutoSize = true; lblFace.Font = new Font(lblFace.Font, FontStyle.Bold);
+            Controls.Add(lblFace);
+            y += 28;
+
+            Label lblRole = new Label(); lblRole.Text = "角色:"; lblRole.Location = new Point(12, y + 3); lblRole.AutoSize = true;
+            Controls.Add(lblRole);
+            cboRole = new ComboBox();
+            cboRole.DropDownStyle = ComboBoxStyle.DropDownList;
+            cboRole.Items.AddRange(new object[] { "轴承-轴颈(旋转)", "轴承-轴颈(固定)", "轴承-座孔(外圈固定)", "轴承-座孔(外圈旋转)", "一般孔轴配合" });
+            cboRole.SelectedIndex = 0;
+            cboRole.Location = new Point(90, y); cboRole.Width = 220;
+            Controls.Add(cboRole);
+            cboRole.SelectedIndexChanged += delegate { RoleChanged(); };
+            y += 30;
+
+            Label lblLoad = new Label(); lblLoad.Text = "载荷:"; lblLoad.Location = new Point(12, y + 3); lblLoad.AutoSize = true;
+            Controls.Add(lblLoad);
+            cboLoad = new ComboBox();
+            cboLoad.DropDownStyle = ComboBoxStyle.DropDownList;
+            cboLoad.Items.AddRange(new object[] { "轻载 (P<=0.07C)", "中载 (0.07C<P<=0.15C)", "重载 (P>0.15C)", "特重/冲击载荷" });
+            cboLoad.SelectedIndex = 1;
+            cboLoad.Location = new Point(90, y); cboLoad.Width = 220;
+            Controls.Add(cboLoad);
+            y += 30;
+
+            Label lblPurpose = new Label(); lblPurpose.Text = "用途:"; lblPurpose.Location = new Point(12, y + 3); lblPurpose.AutoSize = true;
+            Controls.Add(lblPurpose);
+            cboPurpose = new ComboBox();
+            cboPurpose.DropDownStyle = ComboBoxStyle.DropDownList;
+            cboPurpose.Items.AddRange(new object[] { "滑动(有相对运动)", "定位(固定位置, 可拆)", "传动(传递扭矩)", "过盈连接(不拆卸)" });
+            cboPurpose.SelectedIndex = 1;
+            cboPurpose.Location = new Point(90, y); cboPurpose.Width = 220;
+            Controls.Add(cboPurpose);
+            y += 30;
+
+            Label lblDia = new Label(); lblDia.Text = "直径(mm):"; lblDia.Location = new Point(12, y + 3); lblDia.AutoSize = true;
+            Controls.Add(lblDia);
+            txtDia = new TextBox(); txtDia.Text = _diaMM.ToString("0.0"); txtDia.Location = new Point(90, y); txtDia.Width = 100;
+            Controls.Add(txtDia);
+            y += 30;
+
+            Label lblCode = new Label(); lblCode.Text = "配合代码:"; lblCode.Location = new Point(12, y + 3); lblCode.AutoSize = true;
+            Controls.Add(lblCode);
+            txtCode = new TextBox(); txtCode.Text = "k6"; txtCode.Location = new Point(90, y); txtCode.Width = 140;
+            Controls.Add(txtCode);
+            Label lblCodeHint = new Label();
+            lblCodeHint.Text = "轴承轴颈: 如 k6/js6/m6; 座孔: 如 H7/J7/K7; 一般配合: 如 H7/k6";
+            lblCodeHint.Location = new Point(240, y + 3); lblCodeHint.AutoSize = true;
+            Controls.Add(lblCodeHint);
+            y += 34;
+
+            btnCheck = new Button(); btnCheck.Text = "检查并加入列表"; btnCheck.Location = new Point(12, y); btnCheck.Width = 130;
+            btnCheck.Click += delegate { DoCheck(); };
+            Controls.Add(btnCheck);
+            btnDone = new Button(); btnDone.Text = "完成 (生成报告)"; btnDone.Location = new Point(150, y); btnDone.Width = 130;
+            btnDone.Click += delegate { DialogResult = DialogResult.OK; Close(); };
+            Controls.Add(btnDone);
+            y += 36;
+
+            lblResult = new Label();
+            lblResult.Text = "";
+            lblResult.Location = new Point(12, y); lblResult.AutoSize = true; lblResult.MaximumSize = new Size(610, 0);
+            Controls.Add(lblResult);
+            y += 60;
+
+            lst = new ListBox();
+            lst.Location = new Point(12, y); lst.Width = 616; lst.Height = 140;
+            Controls.Add(lst);
+
+            RoleChanged();
+        }
+
+        private void RoleChanged()
+        {
+            bool bearing = cboRole.SelectedIndex >= 0 && cboRole.SelectedIndex <= 3;
+            cboLoad.Enabled = bearing;
+            cboPurpose.Enabled = !bearing;
+            txtCode.Text = bearing ? "k6" : "H7/k6";
+        }
+
+        private void DoCheck()
+        {
+            double dia;
+            double.TryParse(txtDia.Text, out dia);
+            if (dia <= 0) { MessageBox.Show("请输入有效直径"); return; }
+            string code = txtCode.Text.Trim();
+            if (code == "") { MessageBox.Show("请输入配合代码"); return; }
+
+            string verdict, recommend, basis;
+            int load = cboLoad.SelectedIndex + 1;
+            int purpose = cboPurpose.SelectedIndex + 1;
+
+            if (cboRole.SelectedIndex == 4)
+                verdict = KB.GeneralFitJudge(code, purpose, out recommend, out basis);
+            else
+                verdict = KB.FitJudge(code, (string)cboRole.SelectedItem, load, out recommend, out basis);
+
+            FitItem it = new FitItem();
+            it.Role = (string)cboRole.SelectedItem;
+            it.Code = code;
+            it.DiaMM = dia;
+            it.Load = load;
+            it.Purpose = purpose;
+            it.Verdict = verdict;
+            it.Recommend = recommend;
+            it.Basis = basis;
+            Items.Add(it);
+
+            lblResult.Text = "判定: " + verdict + "    推荐: " + recommend + "\r\n" + basis;
+            lblResult.ForeColor = verdict == "合理" ? Color.Green : (verdict == "可接受" ? Color.DarkOrange : Color.Red);
+            lst.Items.Add(dia.ToString("0.0") + "mm  " + it.Role + "  代码 " + code + "  ->  " + verdict + " (推荐 " + recommend + ")");
+            txtCode.Clear();
+        }
+    }
+
+    // 通用单行输入对话框
+    public class SimpleInput : Form
+    {
+        private TextBox txt;
+        public string Value { get { return txt.Text; } }
+
+        public SimpleInput(string title, string prompt, string def)
+        {
+            Text = title;
+            FormBorderStyle = FormBorderStyle.FixedDialog;
+            MaximizeBox = false; MinimizeBox = false;
+            StartPosition = FormStartPosition.CenterScreen;
+            ClientSize = new Size(420, 110);
+
+            Label lbl = new Label();
+            lbl.Text = prompt;
+            lbl.Location = new Point(12, 12); lbl.AutoSize = true; lbl.MaximumSize = new Size(390, 40);
+            Controls.Add(lbl);
+
+            txt = new TextBox();
+            txt.Text = def;
+            txt.Location = new Point(12, 50); txt.Width = 396;
+            Controls.Add(txt);
+
+            Button ok = new Button(); ok.Text = "确定"; ok.DialogResult = DialogResult.OK;
+            ok.Location = new Point(220, 78); ok.Width = 90;
+            Controls.Add(ok);
+            Button cancel = new Button(); cancel.Text = "取消"; cancel.DialogResult = DialogResult.Cancel;
+            cancel.Location = new Point(318, 78); cancel.Width = 90;
+            Controls.Add(cancel);
+        }
+    }
+}
diff --git a/AddIn/src/Core/ICadHost.cs b/AddIn/src/Core/ICadHost.cs
new file mode 100644
index 0000000..a2ed8a6
--- /dev/null
+++ b/AddIn/src/Core/ICadHost.cs
@@ -0,0 +1,17 @@
+using System;
+
+namespace DesignExpress.Core
+{
+    // CAD 宿主抽象接口: Core 不依赖任何具体 CAD 系统,
+    // 由各 CAD 的 Link 适配器(Inventor/Creo/SolidWorks)实现,
+    // 架构类似 COMSOL LiveLink
+    public interface ICadHost
+    {
+        string AppName { get; }
+        object GetActiveDocument();
+        string GetDocType(object doc);
+        DocSnapshot Capture(object doc);
+        double PickCylinderDiameterMM(out string faceName);
+        void SetStatusText(string text);
+    }
+}
diff --git a/AddIn/src/Core/KnowledgeBase.cs b/AddIn/src/Core/KnowledgeBase.cs
new file mode 100644
index 0000000..1c85ed9
--- /dev/null
+++ b/AddIn/src/Core/KnowledgeBase.cs
@@ -0,0 +1,235 @@
+using System;
+
+namespace DesignExpress.Core
+{
+    // 知识库: 机械设计手册常用数据(简化参考版)
+    // 正式生产请以最新版《机械设计手册》及 GB/T 275, GB/T 1800, GB/T 1801 等标准为准
+    public static class KB
+    {
+        public static int SegIndex(double dMM)
+        {
+            if (dMM <= 18) return 1;
+            if (dMM <= 30) return 2;
+            if (dMM <= 50) return 3;
+            if (dMM <= 80) return 4;
+            if (dMM <= 120) return 5;
+            if (dMM <= 180) return 6;
+            if (dMM <= 250) return 7;
+            if (dMM <= 315) return 8;
+            if (dMM <= 400) return 9;
+            if (dMM <= 500) return 10;
+            return -1;
+        }
+
+        public static string SegName(int seg)
+        {
+            switch (seg)
+            {
+                case 1: return "<=18";
+                case 2: return "18~30";
+                case 3: return "30~50";
+                case 4: return "50~80";
+                case 5: return "80~120";
+                case 6: return "120~180";
+                case 7: return "180~250";
+                case 8: return "250~315";
+                case 9: return "315~400";
+                case 10: return "400~500";
+                default: return "?";
+            }
+        }
+
+        private static readonly double[,] IT = new double[11, 10]
+        {
+            { 0.8, 1, 1.2, 1.5, 2, 2.5, 3.5, 4, 4.5, 5 },
+            { 1.2, 1.5, 2, 2.5, 3, 4, 4.5, 5, 6, 7 },
+            { 2, 2.5, 3, 4, 5, 6, 7, 8, 9, 10 },
+            { 3, 4, 5, 6, 8, 10, 12, 13, 15, 16 },
+            { 4, 5, 7, 8, 10, 12, 14, 16, 18, 20 },
+            { 6, 8, 10, 12, 15, 18, 20, 23, 25, 27 },
+            { 10, 12, 16, 19, 22, 25, 28, 32, 36, 40 },
+            { 14, 18, 22, 26, 30, 35, 40, 46, 52, 57 },
+            { 25, 30, 36, 43, 52, 62, 72, 81, 89, 97 },
+            { 40, 48, 58, 70, 84, 100, 115, 130, 140, 155 },
+            { 60, 75, 90, 105, 130, 150, 175, 195, 210, 230 }
+        };
+
+        public static double ItTol(int itNo, int seg)
+        {
+            if (itNo >= 1 && itNo <= 11 && seg >= 1 && seg <= 10) return IT[itNo - 1, seg - 1];
+            return -1;
+        }
+
+        private static string LoadName(int load)
+        {
+            switch (load)
+            {
+                case 1: return "轻载(P<=0.07C)";
+                case 2: return "中载(0.07C<P<=0.15C)";
+                case 3: return "重载(P>0.15C)";
+                default: return "特重/冲击载荷";
+            }
+        }
+
+        public static void ParseFit(string code, out string hole, out string shaft)
+        {
+            hole = ""; shaft = "";
+            string c = (code ?? "").Trim().ToUpper();
+            int p = c.IndexOf('/');
+            if (p > 0)
+            {
+                hole = c.Substring(0, p).Trim();
+                shaft = c.Substring(p + 1).Trim();
+            }
+            else hole = c;
+        }
+
+        public static string FitJudge(string code, string role, int load, out string recommend, out string basis)
+        {
+            recommend = "";
+            string c = (code ?? "").Trim().ToUpper();
+            string rec = "", acc = "";
+            basis = "机械设计手册 第2卷 / GB/T 275-2015 滚动轴承配合";
+            switch (role)
+            {
+                case "轴承-轴颈(旋转)":
+                    switch (load)
+                    {
+                        case 1: rec = "js6"; acc = "k6"; break;
+                        case 2: rec = "k6"; acc = "m6"; break;
+                        case 3: rec = "m6"; acc = "n6"; break;
+                        default: rec = "n6"; acc = "p6,r6"; break;
+                    }
+                    basis += ": 内圈与旋转轴, " + LoadName(load) + ", 推荐 " + rec + " (可选 " + acc + ")";
+                    break;
+                case "轴承-轴颈(固定)":
+                    rec = "h6"; acc = "g6,j6";
+                    basis += ": 内圈与不旋转轴, 推荐 " + rec + " (可选 " + acc + ")";
+                    break;
+                case "轴承-座孔(外圈固定)":
+                    rec = "H7"; acc = "J7,H8";
+                    basis += ": 外圈与壳体孔(固定载荷), 推荐 " + rec + " (可选 " + acc + ")";
+                    break;
+                case "轴承-座孔(外圈旋转)":
+                    rec = "K7"; acc = "M7,N7";
+                    basis += ": 外圈与壳体孔(旋转载荷), 推荐 " + rec + " (可选 " + acc + ")";
+                    break;
+                default:
+                    basis = "未知角色";
+                    return "信息";
+            }
+            recommend = rec;
+            if (c == "") return "信息";
+            if (c == rec) return "合理";
+            if (("," + acc + ",").Contains("," + c + ",")) return "可接受";
+            return "不合理";
+        }
+
+        public static string GeneralFitJudge(string code, int purpose, out string recommend, out string basis)
+        {
+            string hole, shaft;
+            ParseFit(code, out hole, out shaft);
+            string c = (code ?? "").Trim().ToUpper();
+            string fitType, fitUse;
+            LookupFitTable(hole + "/" + shaft, out fitType, out fitUse);
+            string rec = "", acc = "", purposeName = "";
+            basis = "机械设计手册 第2卷 孔轴公差与配合 (GB/T 1801)";
+            switch (purpose)
+            {
+                case 1: purposeName = "滑动配合"; rec = "H8/f7"; acc = "H9/d9,H7/g6"; break;
+                case 2: purposeName = "定位配合"; rec = "H7/js6"; acc = "H7/h6,H7/k6"; break;
+                case 3: purposeName = "传动配合"; rec = "H7/n6"; acc = "H7/p6"; break;
+                default: purposeName = "过盈连接"; rec = "H7/s6"; acc = "H7/r6,H7/u6"; break;
+            }
+            recommend = rec;
+            basis += ": " + purposeName + ", 推荐 " + rec + " (可选 " + acc + ")";
+            if (fitType == "")
+            {
+                basis += "; 当前代码 " + c + " 不在常用配合表中, 请核对";
+                return "信息";
+            }
+            string needType = "间隙";
+            if (purpose == 2) needType = "间隙/过渡";
+            if (purpose == 3) needType = "过渡/过盈";
+            if (purpose == 4) needType = "过盈";
+            if (c == rec) return "合理";
+            if (("," + acc + ",").Contains("," + c + ",")) return "可接受";
+            if (needType.Contains(fitType))
+            {
+                basis += "; 当前 " + c + " 为" + fitType + "配合(" + fitUse + "), 类型方向正确但非优先推荐";
+                return "可接受";
+            }
+            basis += "; 当前 " + c + " 为" + fitType + "配合(" + fitUse + "), 与用途不符";
+            return "不合理";
+        }
+
+        public static void LookupFitTable(string code, out string fitType, out string fitUse)
+        {
+            fitType = ""; fitUse = "";
+            switch ((code ?? "").Trim().ToUpper())
+            {
+                case "H11/C11": fitType = "间隙"; fitUse = "低精度/粗糙滑动, 吊架等"; break;
+                case "H9/D9": fitType = "间隙"; fitUse = "较松滑动, 联轴器导向"; break;
+                case "H8/F7": fitType = "间隙"; fitUse = "一般滑动, 机床导轨低速"; break;
+                case "H7/G6": fitType = "间隙"; fitUse = "精密滑动, 导向件/移动齿轮"; break;
+                case "H7/H6": fitType = "间隙"; fitUse = "小间隙定位, 挂轮/联轴器"; break;
+                case "H7/JS6": fitType = "过渡"; fitUse = "定位, 手轮/隔套"; break;
+                case "H7/K6": fitType = "过渡"; fitUse = "精密定位, 隔套/滚动轴承内圈"; break;
+                case "H7/N6": fitType = "过渡"; fitUse = "较紧定位/传动, 齿轮与轴/连杆"; break;
+                case "H7/P6": fitType = "过盈"; fitUse = "小过盈, 定位兼传小扭矩"; break;
+                case "H7/R6": fitType = "过盈"; fitUse = "一般过盈, 受冲击装配"; break;
+                case "H7/S6": fitType = "过盈"; fitUse = "液压装配过盈"; break;
+                case "H7/U6": fitType = "过盈"; fitUse = "大过盈, 重型压装"; break;
+            }
+        }
+
+        public static string RaSuggest(string role)
+        {
+            if (role.StartsWith("轴承-轴颈")) return "0.4~0.8 um (磨削)";
+            if (role.StartsWith("轴承-座孔")) return "0.8~1.6 um (精镗/铰)";
+            if (role == "密封") return "动密封面 0.4~0.8; 静密封面 0.8~1.6 um";
+            if (role == "GMP") return "物料接触面 Ra<=0.8 (电解抛光 0.4)";
+            return "一般配合面 1.6~3.2 um";
+        }
+
+        public static string GmpMaterialJudge(string matName, out string rec, out string basis)
+        {
+            string m = (matName ?? "").Trim().ToUpper();
+            basis = "GMP 设备设计规范: 与物料接触部件应使用耐腐蚀、易清洁材料";
+            rec = "";
+            if (m == "") { rec = "应填写材料并选用卫生级不锈钢"; return "未通过"; }
+            if (m.Contains("316L") || m.Contains("904L") || m.Contains("2205")) { rec = m + " 符合 GMP 物料接触要求(首选)"; return "合理"; }
+            if (m.Contains("316")) { rec = m + " 符合 GMP 物料接触要求"; return "合理"; }
+            if (m.Contains("钛") || m.Contains("哈氏")) { rec = m + " 耐腐蚀, 符合 GMP 要求"; return "合理"; }
+            if (m.Contains("304") || m.Contains("不锈钢")) { rec = "304 级可接受, 接触面建议电解抛光; 长期接触含氯介质建议 316L"; return "可接受"; }
+            if (m.Contains("PTFE") || m.Contains("聚四氟") || m.Contains("PFA") || m.Contains("PVDF") ||
+                m.Contains("EPDM") || m.Contains("三元乙丙") || m.Contains("FKM") || m.Contains("氟胶") ||
+                m.Contains("硅胶") || m.Contains("PEEK") || m.Contains("聚丙烯") || m.Contains("玻璃"))
+            { rec = m + " 可用于密封/非金属部件, 需确认符合 FDA/药典要求及温度等级"; return "可接受"; }
+            if (m.Contains("铝") || m == "AL") { rec = "铝合金不可直接接触物料, 需阳极氧化/隔离处理"; return "警告"; }
+            if (m.Contains("钢") || m.Contains("铁")) { rec = "碳钢/普通钢不可接触物料, 需改不锈钢或加涂层隔离"; return "未通过"; }
+            if (m.Contains("铜") || m.Contains("锌")) { rec = "铜/锌及其合金不宜直接接触药品物料"; return "未通过"; }
+            rec = "无法识别的材料, 请人工确认";
+            return "警告";
+        }
+
+        private static readonly string[] SealKeys = { "O型圈", "O形圈", "O-RING", "密封圈", "密封垫", "密封条", "密封件", "SEAL", "GASKET", "垫片", "EPDM", "三元乙丙", "氟胶", "硅胶圈" };
+        private static readonly string[] StdKeys = { "螺栓", "螺钉", "螺母", "垫圈", "垫片", "销", "键", "轴承", "电机", "减速机", "气缸", "阀", "泵", "传感器", "PLC", "变频器", "伺服", "型材", "钢管", "法兰", "接头", "卡箍", "视镜", "密封圈", "联轴器", "导向轴", "导轨", "弹簧", "内六角", "GB", "TB", "ISO", "DIN", "JB" };
+
+        public static bool IsSealPartName(string nm)
+        {
+            string u = (nm ?? "").ToUpper();
+            foreach (string k in SealKeys)
+                if (u.Contains(k.ToUpper())) return true;
+            return false;
+        }
+
+        public static bool IsStdPartName(string nm)
+        {
+            string u = (nm ?? "").ToUpper();
+            foreach (string k in StdKeys)
+                if (u.Contains(k.ToUpper())) return true;
+            return false;
+        }
+    }
+}
diff --git a/AddIn/src/Core/MainForm.cs b/AddIn/src/Core/MainForm.cs
new file mode 100644
index 0000000..36e3ee1
--- /dev/null
+++ b/AddIn/src/Core/MainForm.cs
@@ -0,0 +1,190 @@
+using System;
+using System.Drawing;
+using System.Windows.Forms;
+
+namespace DesignExpress.Core
+{
+    // 检查主窗口: TableLayoutPanel 百分比布局, 左树 25% + 右表 75%, 无固定尺寸不遮罩
+    public class MainForm : Form
+    {
+        private DataGridView grid;
+        private TreeView tree;
+        private Label lblSummary;
+        private StatusStrip status;
+        private string mStage = "";
+
+        public MainForm()
+        {
+            BuildUI();
+        }
+
+        private void BuildUI()
+        {
+            Text = "Design Express Res - 设计标注检查";
+            StartPosition = FormStartPosition.CenterScreen;
+            WindowState = FormWindowState.Normal;
+            Rectangle wa = Screen.PrimaryScreen.WorkingArea;
+            Size = new Size(wa.Width / 2, wa.Height / 2);
+            MinimumSize = new Size(720, 460);
+
+            // 主布局: 两列百分比 25% / 75%
+            TableLayoutPanel master = new TableLayoutPanel();
+            master.Dock = DockStyle.Fill;
+            master.ColumnCount = 2;
+            master.RowCount = 1;
+            master.ColumnStyles.Add(new ColumnStyle(SizeType.Percent, 25F));
+            master.ColumnStyles.Add(new ColumnStyle(SizeType.Percent, 75F));
+            master.RowStyles.Add(new RowStyle(SizeType.Percent, 100F));
+            master.Margin = new Padding(0);
+            master.Padding = new Padding(0);
+
+            // 左: 检查项树
+            tree = new TreeView();
+            tree.Dock = DockStyle.Fill;
+            tree.FullRowSelect = true;
+            tree.ShowLines = true;
+            tree.ShowPlusMinus = true;
+            tree.HideSelection = false;
+            tree.BorderStyle = BorderStyle.FixedSingle;
+            FillTree();
+            master.Controls.Add(tree, 0, 0);
+
+            // 右: 汇总 + 结果表格
+            Panel right = new Panel();
+            right.Dock = DockStyle.Fill;
+            right.Margin = new Padding(0);
+
+            grid = new DataGridView();
+            grid.Dock = DockStyle.Fill;
+            grid.ReadOnly = true;
+            grid.AllowUserToAddRows = false;
+            grid.AllowUserToDeleteRows = false;
+            grid.SelectionMode = DataGridViewSelectionMode.FullRowSelect;
+            grid.MultiSelect = false;
+            grid.AutoSizeColumnsMode = DataGridViewAutoSizeColumnsMode.AllCells;
+            grid.ColumnHeadersHeightSizeMode = DataGridViewColumnHeadersHeightSizeMode.AutoSize;
+            grid.BorderStyle = BorderStyle.None;
+            grid.Columns.Add("CheckID", "编号");
+            grid.Columns.Add("Name", "检查项");
+            grid.Columns.Add("Obj", "对象");
+            grid.Columns.Add("Result", "结果");
+            grid.Columns.Add("Note", "说明");
+            grid.Columns.Add("Basis", "判定依据");
+            grid.Columns["Note"].AutoSizeMode = DataGridViewAutoSizeColumnMode.Fill;
+            grid.Columns["Basis"].AutoSizeMode = DataGridViewAutoSizeColumnMode.Fill;
+            right.Controls.Add(grid);
+
+            lblSummary = new Label();
+            lblSummary.Dock = DockStyle.Top;
+            lblSummary.AutoSize = true;
+            lblSummary.TextAlign = ContentAlignment.MiddleLeft;
+            lblSummary.Padding = new Padding(8, 6, 0, 6);
+            lblSummary.Font = new Font("Microsoft YaHei", 9.5f);
+            lblSummary.Text = "就绪: 请先打开文档, 然后在功能区点击检查按钮";
+            right.Controls.Add(lblSummary);
+
+            master.Controls.Add(right, 1, 0);
+
+            // Dock 顺序: Fill 先 Add, Bottom 后 Add
+            Controls.Add(master);
+            status = new StatusStrip();
+            Controls.Add(status);
+
+            Shown += delegate { LoadCurrentResults(); };
+        }
+
+        private void FillTree()
+        {
+            tree.Nodes.Clear();
+            TreeNode root = new TreeNode("检查项清单");
+            TreeNode part = new TreeNode("零件阶段 (P)");
+            part.Nodes.Add("P01~P07 保存状态/代号/名称/材料/设计者/审核者/修订号");
+            part.Nodes.Add("P08 模型标注统计/公差覆盖/形位公差/粗糙度");
+            part.Nodes.Add("P09 公差配合检查 (GB/T 275/GB/T 1801)");
+            part.Nodes.Add("P10~P12 配合面形位公差/粗糙度/公差等级");
+            part.Nodes.Add("P13 螺纹孔检查");
+            part.Nodes.Add("P14 物料接触 + GMP 专项");
+            part.Nodes.Add("P15 焊接标注");
+            part.Nodes.Add("P16 表面处理/防锈");
+            part.Nodes.Add("P17 结构强度/仿真指引");
+            root.Nodes.Add(part);
+
+            TreeNode asm = new TreeNode("装配阶段 (A)");
+            asm.Nodes.Add("A01 文档保存状态");
+            asm.Nodes.Add("A02 GMP 材料合规");
+            asm.Nodes.Add("A03/A04 密封件存在性 + 密封设计提示");
+            asm.Nodes.Add("A05 清洁性设计要求");
+            asm.Nodes.Add("A06 GMP 粗糙度标注");
+            asm.Nodes.Add("A07 静态干涉检查");
+            asm.Nodes.Add("A08 运动干涉(动态)指引");
+            asm.Nodes.Add("A09 外购件优先统计");
+            asm.Nodes.Add("A10 电气选型/西门子联网");
+            asm.Nodes.Add("A11 施工/公共动力系统");
+            asm.Nodes.Add("A12 整机强度/仿真指引");
+            root.Nodes.Add(asm);
+
+            TreeNode drw = new TreeNode("工程图阶段 (D)");
+            drw.Nodes.Add("D00~D09 保存/图框/标题栏/空白/更新/剖视/越界/尺寸/公差/文本");
+            drw.Nodes.Add("D10~D17 形位公差/基准/粗糙度/焊接/孔标注/中心线/越界/图幅");
+            drw.Nodes.Add("D18 物料接触类别声明");
+            drw.Nodes.Add("D19 焊接技术要求(双面焊/打磨)");
+            drw.Nodes.Add("D20 死角/夹角要求(R10/135度)");
+            drw.Nodes.Add("D21~D25 公差/轴承位/螺纹孔/镀镍/平面度");
+            drw.Nodes.Add("D26~D32 角度管/治具/辅助件/外购/测试/装配/防锈");
+            drw.Nodes.Add("D33~D39 施工动力/配孔/吊顶/电气/西门子/强度/夹角");
+            root.Nodes.Add(drw);
+
+            tree.Nodes.Add(root);
+            root.ExpandAll();
+        }
+
+        public void LoadCurrentResults()
+        {
+            grid.Rows.Clear();
+            int pass = 0, warn = 0, fail = 0, info = 0;
+            foreach (CheckResult r in AppState.Results)
+            {
+                int idx = grid.Rows.Add(r.CheckID, r.Name, r.Obj, r.Result, r.Note, r.Basis);
+                DataGridViewRow row = grid.Rows[idx];
+                switch (r.Result)
+                {
+                    case "通过": row.DefaultCellStyle.BackColor = System.Drawing.Color.FromArgb(0xE8, 0xFF, 0xE8); break;
+                    case "警告": row.DefaultCellStyle.BackColor = System.Drawing.Color.FromArgb(0xFF, 0xFF, 0xE0); break;
+                    case "未通过": row.DefaultCellStyle.BackColor = System.Drawing.Color.FromArgb(0xFF, 0xE0, 0xE0); break;
+                    default: row.DefaultCellStyle.BackColor = System.Drawing.Color.FromArgb(0xF0, 0xF0, 0xF0); break;
+                }
+                switch (r.Result)
+                {
+                    case "通过": pass++; break;
+                    case "警告": warn++; break;
+                    case "未通过": fail++; break;
+                    default: info++; break;
+                }
+            }
+            lblSummary.Text = string.Format("检查项: {0}  通过: {1}  警告: {2}  未通过: {3}  信息: {4}",
+                AppState.Results.Count, pass, warn, fail, info);
+            status.Items.Clear();
+            status.Items.Add("当前阶段: " + (mStage == "" ? "全部" : mStage));
+        }
+
+        public void RunAndLoad(string stage, Action run)
+        {
+            try
+            {
+                Cursor = Cursors.WaitCursor;
+                AppState.Results.Clear();
+                mStage = stage;
+                run();
+                LoadCurrentResults();
+            }
+            catch (Exception ex)
+            {
+                MessageBox.Show("检查出错: " + ex.Message, "Design Express Res", MessageBoxButtons.OK, MessageBoxIcon.Error);
+            }
+            finally
+            {
+                Cursor = Cursors.Default;
+            }
+        }
+    }
+}
diff --git a/AddIn/src/Core/QueryForm.cs b/AddIn/src/Core/QueryForm.cs
new file mode 100644
index 0000000..5db76a8
--- /dev/null
+++ b/AddIn/src/Core/QueryForm.cs
@@ -0,0 +1,264 @@
+using System;
+using System.Drawing;
+using System.Windows.Forms;
+
+namespace DesignExpress.Core
+{
+    // 设计数据查询窗口: 一个按钮对应一个功能页, 无切换菜单
+    // TableLayoutPanel 百分比布局: 头部 AutoSize(自适应文字高度), 左输入 35% / 右结果 65%
+    public class QueryForm : Form
+    {
+        private static QueryForm mForm;
+
+        private class ModuleDef
+        {
+            public string Title;     // 窗口标题
+            public string SubTitle;  // 页头主标题
+            public string Desc;      // 功能说明
+        }
+
+        private static readonly ModuleDef[] Modules = new ModuleDef[]
+        {
+            new ModuleDef { Title = "卡簧槽查询 (GB/T 894)", SubTitle = "轴用/孔用弹性挡圈槽尺寸查询", Desc = "输入轴径或孔径, 查询挡圈型号、槽径、槽宽、槽深等设计尺寸" },
+            new ModuleDef { Title = "键槽查询 (GB/T 1095)", SubTitle = "平键键槽尺寸查询", Desc = "输入轴径, 查询键的公称尺寸(b×h×L)、轴槽深、轮毂槽深、键槽长度系列等" },
+            new ModuleDef { Title = "O 型密封圈查询 (GB/T 3452.1)", SubTitle = "O 型密封圈设计", Desc = "输入密封轴径/孔径, 查询圈规格、沟槽尺寸(径向/轴向密封)、压缩量、挡圈配合等" },
+            new ModuleDef { Title = "轴承挡圈查询", SubTitle = "轴承挡圈设计", Desc = "输入轴承外径/内径, 查询挡圈规格、挡边高度、安装槽尺寸、轴向定位设计等" }
+        };
+
+        private Label lblTitle;
+        private Label lblDesc;
+        private FlowLayoutPanel inFlow;
+        private DataGridView grid;
+        private Label outHint;
+
+        public QueryForm(int moduleIndex)
+        {
+            BuildUI(moduleIndex);
+        }
+
+        public static void ShowQuery(int moduleIndex)
+        {
+            if (moduleIndex < 0 || moduleIndex >= Modules.Length) return;
+            if (mForm == null || mForm.IsDisposed)
+                mForm = new QueryForm(moduleIndex);
+            mForm.ApplyModule(moduleIndex);
+            mForm.Show();
+            mForm.Activate();
+        }
+
+        private void BuildUI(int moduleIndex)
+        {
+            StartPosition = FormStartPosition.CenterScreen;
+            WindowState = FormWindowState.Normal;
+            Rectangle wa = Screen.PrimaryScreen.WorkingArea;
+            Size = new Size(wa.Width / 2, wa.Height / 2);
+            MinimumSize = new Size(700, 460);
+
+            // 主布局: 2 行(头部 AutoSize + 主体 100%), 主体 2 列(左 35% / 右 65%)
+            TableLayoutPanel master = new TableLayoutPanel();
+            master.Dock = DockStyle.Fill;
+            master.ColumnCount = 2;
+            master.RowCount = 2;
+            master.ColumnStyles.Add(new ColumnStyle(SizeType.Percent, 35F));
+            master.ColumnStyles.Add(new ColumnStyle(SizeType.Percent, 65F));
+            master.RowStyles.Add(new RowStyle(SizeType.AutoSize));
+            master.RowStyles.Add(new RowStyle(SizeType.Percent, 100F));
+            master.Margin = new Padding(0);
+            master.Padding = new Padding(0);
+
+            // 头部标题区: 占满两列, AutoSize 高度, 文字永远不会被裁剪
+            FlowLayoutPanel headFlow = new FlowLayoutPanel();
+            headFlow.AutoSize = true;
+            headFlow.Anchor = AnchorStyles.Left | AnchorStyles.Top | AnchorStyles.Right;
+            headFlow.FlowDirection = FlowDirection.TopDown;
+            headFlow.WrapContents = false;
+            headFlow.Padding = new Padding(10, 8, 0, 2);
+            headFlow.Margin = new Padding(0);
+
+            lblTitle = new Label();
+            lblTitle.Font = new Font("Microsoft YaHei", 12.5f, FontStyle.Bold);
+            lblTitle.AutoSize = true;
+            lblTitle.Margin = new Padding(0, 0, 0, 2);
+            headFlow.Controls.Add(lblTitle);
+
+            lblDesc = new Label();
+            lblDesc.Font = new Font("Microsoft YaHei", 9f);
+            lblDesc.ForeColor = System.Drawing.Color.Gray;
+            lblDesc.AutoSize = true;
+            lblDesc.Margin = new Padding(0);
+            headFlow.Controls.Add(lblDesc);
+
+            master.Controls.Add(headFlow, 0, 0);
+            master.SetColumnSpan(headFlow, 2);
+
+            // 左: 输入参数 (35%)
+            GroupBox input = new GroupBox();
+            input.Dock = DockStyle.Fill;
+            input.Text = "输入参数";
+            input.Font = new Font("Microsoft YaHei", 10f);
+            input.Margin = new Padding(6, 3, 3, 6);
+
+            inFlow = new FlowLayoutPanel();
+            inFlow.Dock = DockStyle.Fill;
+            inFlow.FlowDirection = FlowDirection.TopDown;
+            inFlow.WrapContents = false;
+            inFlow.Padding = new Padding(10, 8, 10, 8);
+            inFlow.AutoScroll = true;
+            input.Controls.Add(inFlow);
+            master.Controls.Add(input, 0, 1);
+
+            // 右: 查询结果 (65%)
+            GroupBox result = new GroupBox();
+            result.Dock = DockStyle.Fill;
+            result.Text = "查询结果";
+            result.Font = new Font("Microsoft YaHei", 10f);
+            result.Margin = new Padding(3, 3, 6, 6);
+
+            grid = new DataGridView();
+            grid.Dock = DockStyle.Fill;
+            grid.ReadOnly = true;
+            grid.AllowUserToAddRows = false;
+            grid.AllowUserToDeleteRows = false;
+            grid.AutoSizeColumnsMode = DataGridViewAutoSizeColumnsMode.Fill;
+            grid.RowHeadersVisible = false;
+            grid.BackgroundColor = Color.White;
+            grid.BorderStyle = BorderStyle.None;
+            grid.ColumnHeadersHeightSizeMode = DataGridViewColumnHeadersHeightSizeMode.AutoSize;
+            grid.Columns.Add("Item", "项目");
+            grid.Columns.Add("Value", "数值");
+            grid.Columns.Add("Std", "标准");
+            grid.Columns.Add("Remark", "备注");
+            result.Controls.Add(grid);
+
+            outHint = new Label();
+            outHint.Dock = DockStyle.Top;
+            outHint.AutoSize = true;
+            outHint.TextAlign = ContentAlignment.MiddleLeft;
+            outHint.Padding = new Padding(6, 4, 0, 4);
+            outHint.ForeColor = System.Drawing.Color.Gray;
+            outHint.Font = new Font("Microsoft YaHei", 9.5f);
+            result.Controls.Add(outHint);
+
+            master.Controls.Add(result, 1, 1);
+
+            Controls.Add(master);
+
+            ApplyModule(moduleIndex);
+        }
+
+        // 切换到指定功能模块(无菜单, 直接换内容)
+        private void ApplyModule(int moduleIndex)
+        {
+            ModuleDef m = Modules[moduleIndex];
+            Text = "Design Express Res - " + m.Title;
+            lblTitle.Text = m.SubTitle;
+            lblDesc.Text = m.Desc;
+            BuildModuleUI((QueryKind)moduleIndex);
+        }
+
+        private void BuildModuleUI(QueryKind kind)
+        {
+            inFlow.Controls.Clear();
+
+            if (kind == QueryKind.Keyway || kind == QueryKind.Circlip)
+            {
+                Label hint = new Label();
+                hint.Text = "输入轴径, 点击查询获取设计尺寸";
+                hint.Font = new Font("Microsoft YaHei", 9.5f);
+                hint.ForeColor = System.Drawing.Color.Gray;
+                hint.AutoSize = true;
+                hint.Margin = new Padding(0, 0, 0, 6);
+                inFlow.Controls.Add(hint);
+
+                TextBox txtDia = new TextBox();
+                txtDia.Width = 110;
+                txtDia.Font = new Font("Microsoft YaHei", 10f);
+                txtDia.Text = "30";
+
+                Button btnQuery = new Button();
+                btnQuery.Text = "查询";
+                btnQuery.Width = 70;
+                btnQuery.Height = 26;
+                btnQuery.Font = new Font("Microsoft YaHei", 9.5f);
+
+                AddInputRow("轴径 d (mm):", txtDia, btnQuery);
+
+                Label note = new Label();
+                note.Text = "数据为常用参考值, 正式设计请核对最新版标准";
+                note.Font = new Font("Microsoft YaHei", 8.5f);
+                note.ForeColor = System.Drawing.Color.Gray;
+                note.AutoSize = true;
+                note.Margin = new Padding(0, 10, 0, 0);
+                inFlow.Controls.Add(note);
+
+                btnQuery.Click += delegate { DoQuery(kind, txtDia.Text); };
+                txtDia.KeyDown += delegate(object s, KeyEventArgs e)
+                {
+                    if (e.KeyCode == Keys.Enter) DoQuery(kind, txtDia.Text);
+                };
+            }
+            else
+            {
+                Label hint1 = new Label();
+                hint1.Text = "参数输入区(开发中)";
+                hint1.Font = new Font("Microsoft YaHei", 10f, FontStyle.Bold);
+                hint1.AutoSize = true;
+                hint1.Margin = new Padding(0, 0, 0, 6);
+                inFlow.Controls.Add(hint1);
+
+                foreach (string t in new string[] {
+                    "后续在此放置:",
+                    "直径/尺寸输入框",
+                    "标准选择(系列/等级)",
+                    "查询按钮" })
+                {
+                    Label l = new Label();
+                    l.Text = t;
+                    l.AutoSize = true;
+                    l.ForeColor = System.Drawing.Color.Gray;
+                    l.Margin = new Padding(0, 0, 0, 2);
+                    inFlow.Controls.Add(l);
+                }
+            }
+            outHint.Text = "请输入参数后点击查询";
+        }
+
+        private void AddInputRow(string labelText, TextBox txt, Button btn)
+        {
+            FlowLayoutPanel row = new FlowLayoutPanel();
+            row.AutoSize = true;
+            row.WrapContents = false;
+            row.FlowDirection = FlowDirection.LeftToRight;
+            row.Margin = new Padding(0, 2, 0, 2);
+
+            Label l = new Label();
+            l.Text = labelText;
+            l.AutoSize = true;
+            l.Font = new Font("Microsoft YaHei", 10f);
+            l.Margin = new Padding(0, 5, 6, 0);
+            row.Controls.Add(l);
+
+            if (txt != null) row.Controls.Add(txt);
+            if (btn != null) row.Controls.Add(btn);
+
+            inFlow.Controls.Add(row);
+        }
+
+        private void DoQuery(QueryKind kind, string diaText)
+        {
+            double d;
+            if (!double.TryParse(diaText.Trim(), out d) || d <= 0)
+            {
+                MessageBox.Show("请输入有效直径(mm)", "Design Express Res", MessageBoxButtons.OK, MessageBoxIcon.Exclamation);
+                return;
+            }
+            grid.Rows.Clear();
+            var rows = DesignQuery.Query(kind, d);
+            foreach (QueryRow r in rows)
+            {
+                grid.Rows.Add(r.Item, r.Value, r.Std, r.Remark);
+            }
+            outHint.Text = "查询完成: 共 " + rows.Count + " 项结果 (输入直径 d=" + d.ToString("0.0") + " mm)";
+        }
+    }
+}
diff --git a/AddIn/src/Core/Report.cs b/AddIn/src/Core/Report.cs
new file mode 100644
index 0000000..9441843
--- /dev/null
+++ b/AddIn/src/Core/Report.cs
@@ -0,0 +1,251 @@
+using System;
+using System.Collections.Generic;
+using System.Diagnostics;
+using System.Text;
+
+namespace DesignExpress.Core
+{
+    // 报告输出: Excel(COM 动态调用) 优先, CSV 兜底
+    public static class Report
+    {
+        public const string ToolVersion = "1.3.0";
+
+        public static string WriteExcel(string path)
+        {
+            try
+            {
+                Type xlType = Type.GetTypeFromProgID("Excel.Application");
+                if (xlType == null) return WriteCsv(path);
+                dynamic xl = Activator.CreateInstance(xlType);
+                try
+                {
+                    xl.Visible = false;
+                    xl.DisplayAlerts = false;
+                    dynamic wb = xl.Workbooks.Add();
+
+                    dynamic ws1 = wb.Worksheets[1];
+                    ws1.Name = "汇总";
+                    dynamic ws2 = wb.Worksheets.Add(Type.Missing, ws1);
+                    ws2.Name = "明细";
+                    dynamic ws3 = wb.Worksheets.Add(Type.Missing, ws2);
+                    ws3.Name = "检查项清单";
+
+                    ws1.Cells[1, 1] = "设计标注检查报告";
+                    ws1.Cells[2, 1] = "检查时间: " + DateTime.Now.ToString("yyyy-MM-dd HH:mm:ss");
+                    ws1.Cells[3, 1] = "工具版本: " + ToolVersion;
+
+                    int pass, warn, fail, info;
+                    AppState.Count(out pass, out warn, out fail, out info);
+                    ws1.Cells[5, 1] = "检查项总数"; ws1.Cells[5, 2] = AppState.Results.Count;
+                    ws1.Cells[6, 1] = "通过"; ws1.Cells[6, 2] = pass;
+                    ws1.Cells[7, 1] = "警告"; ws1.Cells[7, 2] = warn;
+                    ws1.Cells[8, 1] = "未通过"; ws1.Cells[8, 2] = fail;
+                    ws1.Cells[9, 1] = "信息"; ws1.Cells[9, 2] = info;
+
+                    ws1.Cells[11, 1] = "按检查项统计:";
+                    ws1.Cells[12, 1] = "编号"; ws1.Cells[12, 2] = "检查项";
+                    ws1.Cells[12, 3] = "总数"; ws1.Cells[12, 4] = "通过";
+                    ws1.Cells[12, 5] = "警告"; ws1.Cells[12, 6] = "未通过";
+                    BuildCheckStat(ws1, 13);
+                    ws1.Columns["A:F"].AutoFit();
+
+                    ws2.Cells[1, 1] = "序号"; ws2.Cells[1, 2] = "阶段";
+                    ws2.Cells[1, 3] = "检查对象"; ws2.Cells[1, 4] = "编号";
+                    ws2.Cells[1, 5] = "检查项"; ws2.Cells[1, 6] = "结果";
+                    ws2.Cells[1, 7] = "说明"; ws2.Cells[1, 8] = "判定依据";
+                    int row = 2;
+                    foreach (CheckResult r in AppState.Results)
+                    {
+                        ws2.Cells[row, 1] = row - 1;
+                        ws2.Cells[row, 2] = r.Stage;
+                        ws2.Cells[row, 3] = r.Obj;
+                        ws2.Cells[row, 4] = r.CheckID;
+                        ws2.Cells[row, 5] = r.Name;
+                        ws2.Cells[row, 6] = r.Result;
+                        ws2.Cells[row, 7] = r.Note;
+                        ws2.Cells[row, 8] = r.Basis;
+                        dynamic cell = ws2.Cells[row, 6];
+                        if (r.Result == "通过") cell.Interior.Color = 0x00C8FFC8;
+                        else if (r.Result == "警告") cell.Interior.Color = 0x00C8FFFF;
+                        else if (r.Result == "未通过") cell.Interior.Color = 0x00C8C8FF;
+                        else cell.Interior.Color = 0x00E1E1E1;
+                        row++;
+                    }
+                    ws2.Columns["A:H"].AutoFit();
+
+                    ws3.Cells[1, 1] = "编号"; ws3.Cells[1, 2] = "检查项";
+                    ws3.Cells[1, 3] = "阶段"; ws3.Cells[1, 4] = "说明";
+                    string[,] L = CheckList;
+                    for (int i = 0; i < L.GetLength(0); i++)
+                    {
+                        ws3.Cells[i + 2, 1] = L[i, 0];
+                        ws3.Cells[i + 2, 2] = L[i, 1];
+                        ws3.Cells[i + 2, 3] = L[i, 2];
+                        ws3.Cells[i + 2, 4] = L[i, 3];
+                    }
+                    ws3.Columns["A:D"].AutoFit();
+
+                    string save = path.ToLower().EndsWith(".xlsx") ? path : path + ".xlsx";
+                    wb.SaveAs(save, 51);
+                    wb.Close(false);
+                    xl.Quit();
+                    return save;
+                }
+                finally
+                {
+                    try { xl.Quit(); } catch { }
+                }
+            }
+            catch
+            {
+                return WriteCsv(path);
+            }
+        }
+
+        private static string[,] CheckList = BuildCheckList();
+
+        private static string[,] BuildCheckList()
+        {
+            string[,] L = new string[75, 4];
+            string[] rows = new string[]
+            {
+                "P01,文档保存状态,零件,是否有未保存修改",
+                "P02,零件代号,零件,标题栏必填",
+                "P03,名称,零件,标题栏必填",
+                "P04,材料,零件,必填且非默认",
+                "P05,设计者,零件,标题栏必填",
+                "P06,审核者,零件,标题栏必填",
+                "P07,修订号,零件,版本追溯",
+                "P08,模型标注统计,零件,PMI 三维标注完整性",
+                "P08b,尺寸公差覆盖,零件,配合尺寸必须带公差",
+                "P08c,形位公差标注,零件,跳动/同轴度/平面度等",
+                "P08d,粗糙度标注,零件,配合/密封面必须标注",
+                "P09,公差配合检查,零件,轴承配合按 GB/T 275, 一般配合按 GB/T 1801",
+                "P10,配合面形位公差,零件,轴承位跳动/同轴度 IT5~IT6",
+                "P11,配合面粗糙度,零件,轴颈 0.4~0.8, 座孔 0.8~1.6",
+                "P12,轴承位公差等级,零件,轴颈 IT5~IT6, 座孔 IT7",
+                "P13,螺纹孔检查,零件,螺纹特征及标注齐全",
+                "P14,物料接触检查,零件,直接/间接/非接触分类",
+                "P14b,GMP 接触材料,零件,直接接触须用 316L 级",
+                "P14c,GMP 接触面粗糙度,零件,Ra<=0.8",
+                "P14d,GMP 无死角检查,零件,圆角>=R10, 内夹角>=135度",
+                "P15,焊接标注检查,零件,双面焊/打磨要求",
+                "P16,表面处理/防锈,零件,镀镍/磨床/抛光/防锈包装",
+                "P17,结构强度/仿真,零件,材料指定+CAE 校核指引",
+                "A01,文档保存状态,装配,是否有未保存修改",
+                "A02,GMP 材料合规,装配,全部零件材料合规",
+                "A03,密封件存在性,装配,密封圈/O型圈/垫片识别",
+                "A04,密封设计提示,装配,GB/T 3452.3 密封槽/FDA",
+                "A05,清洁性设计要求,装配,清洁/CIP/死角/排空",
+                "A06,GMP 粗糙度标注,装配,接触面 Ra<=0.8",
+                "A07,静态干涉,装配,干涉分析",
+                "A08,运动干涉(动态),装配,驱动约束/运动仿真",
+                "A09,外购件优先,装配,标准/外购件比例",
+                "A10,电气选型/西门子联网,装配,西门子/PROFINET/防爆/IP等级",
+                "A11,施工/公共动力系统,装配,压缩空气/纯化水/蒸汽/排风/配孔/吊顶",
+                "A12,整机强度/仿真指引,装配,建议应力分析/有限元校核",
+                "D00,文档保存状态,工程图,是否有未保存修改",
+                "D01,图框/标题栏,工程图,每张图纸必须有图框",
+                "D02,标题栏属性,工程图,图号/名称/材料/设计/审核/修订号",
+                "D03,空白图纸,工程图,无视图无标注",
+                "D04,视图更新状态,工程图,出图前必须更新视图",
+                "D05,剖视图统计,工程图,剖面线/剖切位置标注",
+                "D06,视图越界,工程图,视图超出图框",
+                "D07,尺寸数量,工程图,信息项",
+                "D08,尺寸公差,工程图,配合/关键尺寸必须带公差",
+                "D09,尺寸文本异常,工程图,含?的尺寸(测量失败)",
+                "D10,形位公差,工程图,信息项",
+                "D11,基准符号,工程图,API 不支持自动读取",
+                "D12,表面粗糙度,工程图,信息项",
+                "D13,焊接符号,工程图,API 不支持自动读取, 由 D19 覆盖",
+                "D14,孔标注,工程图,API 不支持自动读取, 由 D23 覆盖",
+                "D15,中心线/件号,工程图,信息项",
+                "D16,标注越界,工程图,标注超出图框",
+                "D17,图幅信息,工程图,信息项",
+                "D18,物料接触类别声明,工程图,直接/间接接触标注",
+                "D19,焊接技术要求,工程图,双面焊/打磨/焊接标准",
+                "D20,死角/夹角要求,工程图,无死角/夹角>=135度",
+                "D21,公差要求完整性,工程图,未注公差说明",
+                "D22,轴承位公差标注,工程图,跳动/同轴/旋转精度",
+                "D23,螺纹孔标注,工程图,螺纹代号/深度/攻深",
+                "D24,表面处理/镀镍,工程图,镀镍后是否磨床/抛光",
+                "D25,平面度/平行度,工程图,关键面平面度要求",
+                "D26,特殊角度管加工,工程图,角度管/弯管要求",
+                "D27,装配治具与检验,工程图,治具/检具/检验要求",
+                "D28,加工辅助件要求,工程图,工艺/毛坯/余量",
+                "D29,外购件优先,工程图,标准件优先采购",
+                "D30,测试要求,工程图,试压/气密/出厂测试",
+                "D31,装配要求,工程图,安装/扭矩/间隙",
+                "D32,防锈要求,工程图,防锈/包装/海运",
+                "D33,施工/公共动力系统,工程图,压缩空气/纯化水/蒸汽/排风",
+                "D34,配孔技术要求,工程图,配孔/配钻/现场配",
+                "D35,吊顶配件要求,工程图,吊顶/吊架/吊装",
+                "D36,电气元件选型,工程图,防爆/IP等级/选型",
+                "D37,西门子联网器件,工程图,西门子/PROFINET/联网",
+                "D38,结构强度/仿真,工程图,强度校核/仿真说明",
+                "D39,夹角R10/135度确认,工程图,死角夹角要求确认"
+            };
+            for (int i = 0; i < rows.Length; i++)
+            {
+                string[] p = rows[i].Split(',');
+                for (int j = 0; j < 4; j++)
+                    if (j < p.Length) L[i, j] = p[j];
+            }
+            return L;
+        }
+
+        private static void BuildCheckStat(dynamic ws, int startRow)
+        {
+            List<string> ids = new List<string>();
+            List<string> names = new List<string>();
+            foreach (CheckResult r in AppState.Results)
+            {
+                if (!ids.Contains(r.CheckID))
+                {
+                    ids.Add(r.CheckID);
+                    names.Add(r.Name);
+                }
+            }
+            int row = startRow;
+            for (int i = 0; i < ids.Count; i++)
+            {
+                int nT = 0, nP = 0, nW = 0, nF = 0;
+                foreach (CheckResult r in AppState.Results)
+                {
+                    if (r.CheckID == ids[i])
+                    {
+                        nT++;
+                        if (r.Result == "通过") nP++;
+                        else if (r.Result == "警告") nW++;
+                        else if (r.Result == "未通过") nF++;
+                    }
+                }
+                ws.Cells[row, 1] = ids[i];
+                ws.Cells[row, 2] = names[i];
+                ws.Cells[row, 3] = nT;
+                ws.Cells[row, 4] = nP;
+                ws.Cells[row, 5] = nW;
+                ws.Cells[row, 6] = nF;
+                row++;
+            }
+        }
+
+        public static string WriteCsv(string path)
+        {
+            string save = path.ToLower().EndsWith(".csv") ? path : path + ".csv";
+            StringBuilder sb = new StringBuilder();
+            sb.AppendLine("序号,阶段,检查对象,编号,检查项,结果,说明,判定依据");
+            int i = 1;
+            foreach (CheckResult r in AppState.Results)
+            {
+                sb.Append(i).Append(',').Append(r.Stage).Append(',').Append(r.Obj).Append(',')
+                  .Append(r.CheckID).Append(',').Append(r.Name).Append(',').Append(r.Result).Append(',')
+                  .Append("\"").Append(r.Note.Replace("\"", "\"\"")).Append("\",\"")
+                  .Append(r.Basis.Replace("\"", "\"\"")).AppendLine("\"");
+                i++;
+            }
+            System.IO.File.WriteAllText(save, sb.ToString(), new UTF8Encoding(true));
+            return save;
+        }
+    }
+}
diff --git a/AddIn/src/Core/Snapshots.cs b/AddIn/src/Core/Snapshots.cs
new file mode 100644
index 0000000..97fdd6f
--- /dev/null
+++ b/AddIn/src/Core/Snapshots.cs
@@ -0,0 +1,90 @@
+using System;
+using System.Collections.Generic;
+
+namespace DesignExpress.Core
+{
+    // 文档快照: Link 层把 CAD 文档状态拍成纯数据, Core 只处理快照, 与 CAD 完全解耦
+    public class DocSnapshot
+    {
+        public string Kind = "";                 // Part / Assembly / Drawing
+        public bool Dirty;
+        public string DisplayName = "";
+        public string Folder = "";
+        public Dictionary<string, string> Props = new Dictionary<string, string>();
+        public string MaterialName = "";
+        public ModelInfo Model;                  // 零件/装配的三维标注
+        public AssemblyInfo Asm;                 // 装配
+        public List<SheetInfo> Sheets = new List<SheetInfo>();   // 工程图
+        public List<DocInfo> OpenDocs = new List<DocInfo>();     // 会话中已打开的文档
+    }
+
+    public class DocInfo
+    {
+        public string Name = "";
+        public Dictionary<string, string> Props = new Dictionary<string, string>();
+        public string Material = "";
+        public int TexCount = 0;
+    }
+
+    public class ModelInfo
+    {
+        public int DimCount = -1;
+        public int FcfCount = -1;
+        public int TexCount = -1;
+        public int DatumCount = -1;
+        public int ThreadNoteCount = -1;
+        public int TolCount = 0;
+        public bool TolReadable = true;
+        public string FirstTexText = "";
+        public int ThreadFeatureCount = -1;
+        public string ThreadDesignation = "";
+        public bool MinFilletReadable = false;
+        public double MinFilletRadiusMM = -1;
+    }
+
+    public class AssemblyInfo
+    {
+        public List<string> OccurrenceNames = new List<string>();
+        public List<InterferencePair> Interferences = new List<InterferencePair>();
+        public int InterferenceState = 0;        // 0=无干涉 1=发现干涉 2=检查失败
+        public string InterferenceError = "";
+        public int TopLevelCount = 0;
+    }
+
+    public class InterferencePair
+    {
+        public string Name1 = "";
+        public string Name2 = "";
+        public double VolumeCM3 = 0;
+    }
+
+    public class RectD
+    {
+        public double L, T, R, B;
+    }
+
+    public class SheetInfo
+    {
+        public string Name = "";
+        public bool HasBorder = false;
+        public bool HasTitleBlock = false;
+        public string TitleBlockName = "";
+        public double SheetWidth = 0, SheetHeight = 0;
+        public RectD BorderRect;                // null 表示无图框
+        public int ViewCount = 0;
+        public int UpdateNeeded = 0;
+        public int UpdateError = 0;
+        public int SectionCount = 0;
+        public List<RectD> ViewRects = new List<RectD>();
+        public int DimCount = 0;
+        public int DimTolCount = 0;
+        public int DimQuestionCount = 0;
+        public int FcfCount = 0;
+        public int TexCount = 0;
+        public int CenterlineCount = 0;
+        public int BalloonCount = 0;
+        public List<string> NotesTexts = new List<string>();
+        public List<RectD> FcfRects = new List<RectD>();
+        public List<RectD> TexRects = new List<RectD>();
+    }
+}
diff --git a/AddIn/src/Core/ToolIcons.cs b/AddIn/src/Core/ToolIcons.cs
new file mode 100644
index 0000000..2b1e83d
--- /dev/null
+++ b/AddIn/src/Core/ToolIcons.cs
@@ -0,0 +1,236 @@
+using System;
+using System.Drawing;
+using System.Drawing.Drawing2D;
+using System.IO;
+using System.Runtime.InteropServices;
+
+namespace DesignExpress.Core
+{
+    // 功能按钮图标类型
+    public enum ToolIcon
+    {
+        Part,       // 零件-齿轮
+        Asm,        // 装配-方块
+        Drw,        // 工程图-图纸
+        Export,     // 导出-报告
+        Help,       // 说明-问号
+        Circlip,    // 卡簧槽-开口卡簧
+        Keyway,     // 键槽-轴槽
+        Oring,      // O型圈-圆环
+        Bearing     // 轴承挡圈-轴承
+    }
+
+    // 共享图标生成器: 仓鼠品牌形象 + 功能符号, 供 Inventor(.ico) 和 SolidWorks(图标条BMP) 复用
+    public static class ToolIcons
+    {
+        private static readonly Color[] BgColors = new Color[]
+        {
+            Color.FromArgb(0x2E, 0x75, 0xB6),   // Part 蓝
+            Color.FromArgb(0x33, 0x8A, 0x4E),   // Asm 绿
+            Color.FromArgb(0xE6, 0x8A, 0x00),   // Drw 橙
+            Color.FromArgb(0x7B, 0x4F, 0xB0),   // Export 紫
+            Color.FromArgb(0x5F, 0x5F, 0x5F),   // Help 灰
+            Color.FromArgb(0x1F, 0x8A, 0x8A),   // Circlip 青
+            Color.FromArgb(0x8A, 0x5A, 0x2E),   // Keyway 棕
+            Color.FromArgb(0xC0, 0x3A, 0x2B),   // Oring 红
+            Color.FromArgb(0xD2, 0x5E, 0x8A)    // Bearing 粉
+        };
+
+        public static Color IconColor(ToolIcon icon)
+        {
+            return BgColors[(int)icon];
+        }
+
+        // 绘制单个图标到指定位置: 中央大功能符号 + 底部小仓鼠品牌点缀
+        private static void DrawIcon(Graphics g, int ox, int oy, int size, ToolIcon icon, Color bg)
+        {
+            Color fur = Color.FromArgb(0xE8, 0xC0, 0x7D);
+            Color ear = Color.FromArgb(0xC8, 0x8A, 0x4F);
+            Color dark = Color.FromArgb(0x3A, 0x24, 0x10);
+            Color pink = Color.FromArgb(0xF2, 0x9E, 0xB6);
+
+            using (GraphicsPath path = RoundedRect(ox + 1, oy + 1, size - 2, size - 2, 6))
+            using (SolidBrush bgb = new SolidBrush(bg))
+            {
+                g.FillPath(bgb, path);
+            }
+
+            using (SolidBrush bEar = new SolidBrush(ear))
+            using (SolidBrush bFur = new SolidBrush(fur))
+            using (SolidBrush bDark = new SolidBrush(dark))
+            using (SolidBrush bPink = new SolidBrush(pink))
+            using (SolidBrush bWhite = new SolidBrush(Color.White))
+            using (Pen pWhite = new Pen(Color.White, 2f))
+            {
+                // 中央功能符号(大, 醒目)
+                int cx = ox + size / 2;
+                int cy = oy + size / 2 - 2;
+                switch (icon)
+                {
+                    case ToolIcon.Part:   // 齿轮
+                        g.FillEllipse(bWhite, cx - 4, cy - 4, 8, 8);
+                        g.FillRectangle(bWhite, cx - 6.5f, cy - 1.5f, 13, 3);
+                        g.FillRectangle(bWhite, cx - 1.5f, cy - 6.5f, 3, 13);
+                        g.FillRectangle(bWhite, cx - 5.5f, cy - 5.5f, 3, 3);
+                        g.FillRectangle(bWhite, cx + 2.5f, cy - 5.5f, 3, 3);
+                        g.FillRectangle(bWhite, cx - 5.5f, cy + 2.5f, 3, 3);
+                        g.FillRectangle(bWhite, cx + 2.5f, cy + 2.5f, 3, 3);
+                        break;
+                    case ToolIcon.Asm:    // 三个方块(品字)
+                        g.FillRectangle(bWhite, cx - 8, cy - 5, 6, 6);
+                        g.FillRectangle(bWhite, cx + 2, cy - 5, 6, 6);
+                        g.FillRectangle(bWhite, cx - 3, cy + 2, 6, 6);
+                        break;
+                    case ToolIcon.Drw:    // 图纸
+                        g.DrawRectangle(pWhite, cx - 6, cy - 6, 12, 12);
+                        g.DrawLine(pWhite, cx - 6, cy - 2, cx + 0, cy - 2);
+                        g.DrawLine(pWhite, cx - 6, cy + 2, cx + 2, cy + 2);
+                        g.DrawLine(pWhite, cx - 2, cy + 6, cx + 3, cy + 1);
+                        break;
+                    case ToolIcon.Export: // 报告表格
+                        g.FillRectangle(bWhite, cx - 6, cy - 6, 12, 12);
+                        using (SolidBrush bBg = new SolidBrush(bg))
+                        {
+                            g.FillRectangle(bBg, cx - 4, cy - 3, 8, 2);
+                            g.FillRectangle(bBg, cx - 4, cy + 0, 8, 2);
+                            g.FillRectangle(bBg, cx - 4, cy + 3, 5, 2);
+                        }
+                        break;
+                    case ToolIcon.Help:   // 问号
+                        using (Font f = new Font("Arial", 13f, FontStyle.Bold, GraphicsUnit.Pixel))
+                        {
+                            g.DrawString("?", f, bWhite, cx - 4, cy - 9);
+                        }
+                        break;
+                    case ToolIcon.Circlip: // 开口卡簧
+                        g.DrawArc(pWhite, cx - 6, cy - 5.5f, 12, 11, 40, 280);
+                        break;
+                    case ToolIcon.Keyway:  // 轴键槽
+                        g.DrawEllipse(pWhite, cx - 6.5f, cy - 5, 13, 10);
+                        g.FillRectangle(bWhite, cx - 3, cy - 5, 6, 5);
+                        break;
+                    case ToolIcon.Oring:   // O型圈
+                        g.DrawEllipse(pWhite, cx - 6.5f, cy - 5, 13, 10);
+                        g.DrawEllipse(pWhite, cx - 3.5f, cy - 2, 7, 4);
+                        break;
+                    case ToolIcon.Bearing: // 轴承
+                        g.DrawEllipse(pWhite, cx - 6.5f, cy - 5, 13, 10);
+                        g.FillEllipse(bWhite, cx - 1.5f, cy - 0.5f, 3, 3);
+                        g.FillEllipse(bWhite, cx - 5f, cy - 4f, 2, 2);
+                        g.FillEllipse(bWhite, cx + 3f, cy - 4f, 2, 2);
+                        g.FillEllipse(bWhite, cx - 5f, cy + 3f, 2, 2);
+                        g.FillEllipse(bWhite, cx + 3f, cy + 3f, 2, 2);
+                        break;
+                }
+            }
+        }
+
+        // 直接绘制 Bitmap 并转 IPictureDisp(Inventor 按钮图标)
+        public static object CreatePictureDisp(ToolIcon icon, int size)
+        {
+            try
+            {
+                using (Bitmap bmp = new Bitmap(size, size))
+                {
+                    using (Graphics g = Graphics.FromImage(bmp))
+                    {
+                        g.SmoothingMode = SmoothingMode.AntiAlias;
+                        DrawIcon(g, 0, 0, size, icon, BgColors[(int)icon]);
+                    }
+                    IntPtr hbm = bmp.GetHbitmap();
+                    PICTDESC pd;
+                    pd.cbSizeofstruct = Marshal.SizeOf(typeof(PICTDESC));
+                    pd.picType = 1;   // CT_BITMAP
+                    pd.hbitmap = hbm;
+                    pd.hpal = IntPtr.Zero;
+                    Guid iid = new Guid("7BF80981-BF32-101A-8BBB-00AA00300CAB");   // stdole.IPictureDisp 正确 IID(注意是81结尾)
+                    object ppv;
+                    int hr = OleCreatePictureIndirect(ref pd, ref iid, true, out ppv);
+                    if (hr != 0 || ppv == null) return Type.Missing;
+                    return ppv;
+                }
+            }
+            catch { return Type.Missing; }
+        }
+
+        [StructLayout(LayoutKind.Sequential)]
+        private struct PICTDESC
+        {
+            public int cbSizeofstruct;
+            public int picType;
+            public IntPtr hbitmap;
+            public IntPtr hpal;
+        }
+
+        [DllImport("oleaut32.dll")]
+        private static extern int OleCreatePictureIndirect(ref PICTDESC pDesc, ref Guid riid, bool fOwn, out object ppvObj);
+
+        [DllImport("user32.dll")]
+        private static extern bool DeleteObject(IntPtr hObject);
+
+        // 生成单个 .ico 文件
+        public static string CreateIco(ToolIcon icon, int size, string file)
+        {
+            try
+            {
+                using (Bitmap bmp = new Bitmap(size, size))
+                {
+                    using (Graphics g = Graphics.FromImage(bmp))
+                    {
+                        g.SmoothingMode = SmoothingMode.AntiAlias;
+                        g.Clear(Color.FromArgb(0xFF, 0x00, 0xFF));
+                        DrawIcon(g, 0, 0, size, icon, BgColors[(int)icon]);
+                    }
+                    Icon ic = Icon.FromHandle(bmp.GetHicon());
+                    try
+                    {
+                        using (FileStream fs = new FileStream(file, FileMode.Create))
+                            ic.Save(fs);
+                    }
+                    finally
+                    {
+                        DestroyIcon(ic.Handle);
+                    }
+                }
+                return file;
+            }
+            catch { return ""; }
+        }
+
+        // 生成 SolidWorks 图标条 BMP(每格 size, 横向拼接)
+        public static string CreateStripBmp(ToolIcon[] icons, int size, string file)
+        {
+            try
+            {
+                int n = icons.Length;
+                using (Bitmap bmp = new Bitmap(size * n, size))
+                {
+                    using (Graphics g = Graphics.FromImage(bmp))
+                    {
+                        g.SmoothingMode = SmoothingMode.AntiAlias;
+                        g.Clear(Color.FromArgb(0xFF, 0x00, 0xFF));
+                        for (int i = 0; i < n; i++)
+                            DrawIcon(g, i * size, 0, size, icons[i], BgColors[(int)icons[i]]);
+                    }
+                    bmp.Save(file, System.Drawing.Imaging.ImageFormat.Bmp);
+                }
+                return file;
+            }
+            catch { return ""; }
+        }
+
+        [System.Runtime.InteropServices.DllImport("user32.dll")]
+        private static extern bool DestroyIcon(IntPtr hIcon);
+
+        private static GraphicsPath RoundedRect(int x, int y, int w, int h, int r)
+        {
+            GraphicsPath p = new GraphicsPath();
+            p.AddArc(x, y, r, r, 180, 90);
+            p.AddArc(x + w - r, y, r, r, 270, 90);
+            p.AddArc(x + w - r, y + h - r, r, r, 0, 90);
+            p.AddArc(x, y + h - r, r, r, 90, 90);
+            p.CloseFigure();
+            return p;
+        }
+    }
+}
diff --git a/AddIn/src/InventorLink/AddInServer.cs b/AddIn/src/InventorLink/AddInServer.cs
new file mode 100644
index 0000000..be3cedc
--- /dev/null
+++ b/AddIn/src/InventorLink/AddInServer.cs
@@ -0,0 +1,211 @@
+using System;
+using System.Collections.Generic;
+using System.Runtime.InteropServices;
+using Inventor;
+using DesignExpress.Core;
+
+[assembly: ComVisible(true)]
+
+namespace DesignExpress.InventorLink
+{
+    [Guid("D422E0BF-02D0-4DAE-958A-7BBA80B718E9")]
+    [ComVisible(true)]
+    [ClassInterface(ClassInterfaceType.None)]
+    [ProgId("DesignExpress.InventorLink.AddInServer")]
+    public class AddInServer : ApplicationAddInServer
+    {
+        public const string TabId = "InvDesignCheck_Tab";
+        public const string PanelId = "InvDesignCheck_Panel";
+        public const string PanelQueryId = "InvDesignCheck_PanelQuery";
+        private Application mApp;
+        private string mClientId;
+        private static Dictionary<string, Inventor.ButtonDefinition> mDefs = new Dictionary<string, Inventor.ButtonDefinition>();
+
+        public void Activate(ApplicationAddInSite addInSiteObject, bool firstTime)
+        {
+            try { mApp = (Application)addInSiteObject.Application; } catch { }
+            try { mClientId = addInSiteObject.Parent.ClientId; } catch { }
+            if (mApp == null) return;
+            AppState.Host = new InventorHost(mApp);
+            try { CreateRibbon(); } catch { }
+        }
+
+        private void CreateRibbon()
+        {
+            Inventor.UserInterfaceManager uim = mApp.UserInterfaceManager;
+            string[] ribNames = { "Part", "Assembly", "Drawing", "Presentation", "ZeroDoc" };
+            foreach (string n in ribNames)
+            {
+                try
+                {
+                    Inventor.Ribbon ribbon = uim.Ribbons[n];
+                    AddTabToRibbon(ribbon);
+                }
+                catch { }
+            }
+        }
+
+        private void AddTabToRibbon(Inventor.Ribbon ribbon)
+        {
+            Inventor.RibbonTab tab = null;
+            try { tab = ribbon.RibbonTabs[TabId]; } catch { }
+            if (tab == null)
+                tab = ribbon.RibbonTabs.Add("Design Express Res", TabId, "", "", false, false);
+            Inventor.RibbonPanel panel = null;
+            try { panel = tab.RibbonPanels[PanelId]; } catch { }
+            if (panel == null)
+                panel = tab.RibbonPanels.Add("设计检查", PanelId, "", "", false);
+
+            if (panel.CommandControls.Count == 0)
+            {
+                panel.CommandControls.AddButton(GetDef("零件检查", "InvDesignCheck_CmdPart",
+                    "对当前零件进行三维标注、公差配合、GMP 检查",
+                    "零件检查：标注统计、公差配合(GB/T 275)、形位公差、粗糙度、螺纹孔、物料接触 GMP、表面处理",
+                    Checks.PartCheck));
+                panel.CommandControls.AddButton(GetDef("装配检查", "InvDesignCheck_CmdAsm",
+                    "对当前装配进行 GMP、密封、干涉、外购件检查",
+                    "装配检查：GMP 材料合规、密封件、清洁性、粗糙度、静态干涉、外购件、电气/西门子、动力系统",
+                    Checks.AssemblyCheck));
+                panel.CommandControls.AddButton(GetDef("工程图检查", "InvDesignCheck_CmdDrw",
+                    "对当前工程图进行标注与 spec 技术要求检查",
+                    "工程图检查：图框、标题栏、视图更新、尺寸公差、标注统计、spec 技术要求关键词齐全性",
+                    Checks.DrawingCheck));
+                panel.CommandControls.AddButton(GetDef("导出报告", "InvDesignCheck_CmdExport",
+                    "导出检查报告(Excel/CSV)",
+                    "导出检查报告(Excel/CSV)",
+                    Checks.ExportReport));
+                panel.CommandControls.AddButton(GetDef("使用说明", "InvDesignCheck_CmdHelp",
+                    "查看检查项清单与使用说明",
+                    "查看检查项清单与使用说明",
+                    Checks.Help));
+            }
+
+            Inventor.RibbonPanel panelQuery = null;
+            try { panelQuery = tab.RibbonPanels[PanelQueryId]; } catch { }
+            if (panelQuery == null)
+                panelQuery = tab.RibbonPanels.Add("设计数据查询", PanelQueryId, "", "", false);
+            if (panelQuery.CommandControls.Count == 0)
+            {
+                panelQuery.CommandControls.AddButton(GetDef("卡簧槽查询", "InvDesignCheck_CmdCirclip",
+                    "轴用/孔用弹性挡圈槽尺寸查询 (GB/T 894)",
+                    "卡簧槽: 输入轴径/孔径, 查询挡圈型号、槽径、槽宽、槽深",
+                    Checks.CirclipQuery));
+                panelQuery.CommandControls.AddButton(GetDef("键槽查询", "InvDesignCheck_CmdKeyway",
+                    "平键键槽尺寸查询 (GB/T 1095)",
+                    "键槽: 输入轴径, 查询键尺寸 b×h、轴槽深、轮毂槽深",
+                    Checks.KeywayQuery));
+                panelQuery.CommandControls.AddButton(GetDef("O型密封圈查询", "InvDesignCheck_CmdOring",
+                    "O 型密封圈设计与沟槽尺寸查询 (GB/T 3452.1)",
+                    "O型密封圈: 查询圈规格、沟槽尺寸、压缩量",
+                    Checks.OringQuery));
+                panelQuery.CommandControls.AddButton(GetDef("轴承挡圈查询", "InvDesignCheck_CmdBRing",
+                    "轴承挡圈与挡边设计查询",
+                    "轴承挡圈: 查询挡圈规格、挡边高度、安装槽尺寸",
+                    Checks.BearingRingQuery));
+            }
+        }
+
+        private Inventor.ButtonDefinition GetDef(string display, string internalName,
+                                                 string desc, string tip, Action action)
+        {
+            Inventor.ButtonDefinition def;
+            lock (mDefs)
+            {
+                if (mDefs.TryGetValue(internalName, out def)) return def;
+                // Inventor 图标需要 IPictureDisp(直接内存绘制, 不经过文件)
+                object stdIcon = Type.Missing, largeIcon = Type.Missing;
+                try
+                {
+                    ToolIcon ic = IconEnum(IconName(internalName));
+                    stdIcon = ToolIcons.CreatePictureDisp(ic, 16);
+                    largeIcon = ToolIcons.CreatePictureDisp(ic, 32);
+                }
+                catch { }
+                try
+                {
+                    def = mApp.CommandManager.ControlDefinitions.AddButtonDefinition(
+                        display, internalName, CommandTypesEnum.kNonShapeEditCmdType, mClientId, desc, tip,
+                        stdIcon, largeIcon, ButtonDisplayEnum.kAlwaysDisplayText);
+                }
+                catch
+                {
+                    def = mApp.CommandManager.ControlDefinitions.AddButtonDefinition(
+                        display, internalName, CommandTypesEnum.kNonShapeEditCmdType, mClientId, desc, tip,
+                        Type.Missing, Type.Missing, ButtonDisplayEnum.kAlwaysDisplayText);
+                }
+                mDefs[internalName] = def;
+                // 关键: 直接订阅按钮的 OnExecute 事件处理点击(与 Joyea 一致, 不依赖 ExecuteCommand 路由)
+                try
+                {
+                    Inventor.ButtonDefinitionSink_Event evt = (Inventor.ButtonDefinitionSink_Event)def;
+                    evt.OnExecute += delegate(NameValueMap context)
+                    {
+                        try { action(); }
+                        catch (Exception ex) { System.Windows.Forms.MessageBox.Show("执行出错: " + ex.Message); }
+                    };
+                }
+                catch { }
+            }
+            return def;
+        }
+
+        private static string IconName(string internalName)
+        {
+            if (internalName.EndsWith("Part")) return "part";
+            if (internalName.EndsWith("Asm")) return "asm";
+            if (internalName.EndsWith("Drw")) return "drw";
+            if (internalName.EndsWith("Export")) return "export";
+            if (internalName.EndsWith("Help")) return "help";
+            if (internalName.EndsWith("Circlip")) return "circlip";
+            if (internalName.EndsWith("Keyway")) return "keyway";
+            if (internalName.EndsWith("Oring")) return "oring";
+            if (internalName.EndsWith("BRing")) return "bearing";
+            return "help";
+        }
+
+        private static ToolIcon IconEnum(string name)
+        {
+            switch (name)
+            {
+                case "part": return ToolIcon.Part;
+                case "asm": return ToolIcon.Asm;
+                case "drw": return ToolIcon.Drw;
+                case "export": return ToolIcon.Export;
+                case "help": return ToolIcon.Help;
+                case "circlip": return ToolIcon.Circlip;
+                case "keyway": return ToolIcon.Keyway;
+                case "oring": return ToolIcon.Oring;
+                case "bearing": return ToolIcon.Bearing;
+                default: return ToolIcon.Help;
+            }
+        }
+
+        public void ExecuteCommand(int commandID)
+        {
+            // OnExecute 事件为主要路径, 此方法保留兼容(无操作)
+        }
+
+        public object Automation { get { return null; } }
+
+        public void Deactivate()
+        {
+            try
+            {
+                Inventor.UserInterfaceManager uim = mApp.UserInterfaceManager;
+                string[] ribNames = { "Part", "Assembly", "Drawing", "Presentation", "ZeroDoc" };
+                foreach (string n in ribNames)
+                {
+                    try
+                    {
+                        Inventor.Ribbon ribbon = uim.Ribbons[n];
+                        Inventor.RibbonTab tab = null;
+                        try { tab = ribbon.RibbonTabs[TabId]; } catch { }
+                        if (tab != null) { try { tab.Delete(); } catch { } }
+                    }
+                    catch { }
+                }
+            }
+            catch { }
+        }
+    }
+}
diff --git a/AddIn/src/InventorLink/InventorHost.cs b/AddIn/src/InventorLink/InventorHost.cs
new file mode 100644
index 0000000..a375f18
--- /dev/null
+++ b/AddIn/src/InventorLink/InventorHost.cs
@@ -0,0 +1,458 @@
+using System;
+using System.Collections.Generic;
+using Inventor;
+using DesignExpress.Core;
+
+namespace DesignExpress.InventorLink
+{
+    // Inventor 适配器: 实现 ICadHost, 把 Inventor 文档状态拍成 Core 快照
+    public class InventorHost : ICadHost
+    {
+        private Application mApp;
+
+        public InventorHost(Application app)
+        {
+            mApp = app;
+        }
+
+        public string AppName { get { return "Inventor"; } }
+
+        public object GetActiveDocument()
+        {
+            try { return mApp.ActiveDocument; } catch { return null; }
+        }
+
+        public string GetDocType(object doc)
+        {
+            try
+            {
+                dynamic d = doc;
+                DocumentTypeEnum t = (DocumentTypeEnum)d.DocumentType;
+                if (t == DocumentTypeEnum.kPartDocumentObject) return "Part";
+                if (t == DocumentTypeEnum.kAssemblyDocumentObject) return "Assembly";
+                if (t == DocumentTypeEnum.kDrawingDocumentObject) return "Drawing";
+            }
+            catch { }
+            return "";
+        }
+
+        public void SetStatusText(string text)
+        {
+            try { mApp.StatusBarText = text; } catch { }
+        }
+
+        public double PickCylinderDiameterMM(out string faceName)
+        {
+            faceName = "手动输入";
+            try
+            {
+                object pick = mApp.CommandManager.Pick(SelectionFilterEnum.kPartFaceCylindricalFilter,
+                    "请选择轴承/配合圆柱面(轴或孔), 取消则手动输入直径");
+                if (pick != null)
+                {
+                    Face f = pick as Face;
+                    if (f != null)
+                    {
+                        object geom = f.Geometry;
+                        if (geom is Cylinder)
+                        {
+                            double d = ((Cylinder)geom).Radius * 20;
+                            try { faceName = Convert.ToString(((dynamic)f).Name); } catch { }
+                            return d;
+                        }
+                    }
+                }
+            }
+            catch { }
+            return 0;
+        }
+
+        public DocSnapshot Capture(object doc)
+        {
+            DocSnapshot snap = new DocSnapshot();
+            dynamic d = doc;
+            snap.Kind = GetDocType(doc);
+            try { snap.Dirty = (bool)d.Dirty; } catch { }
+            try { snap.DisplayName = Convert.ToString(d.DisplayName); } catch { }
+            try
+            {
+                string full = Convert.ToString(d.FullDocumentName);
+                int p = full.LastIndexOf('\\');
+                if (p > 0) snap.Folder = full.Substring(0, p + 1);
+            }
+            catch { }
+
+            snap.Props = ReadProps(doc);
+
+            if (snap.Kind == "Part" || snap.Kind == "Assembly")
+            {
+                snap.MaterialName = ReadMaterial(d);
+                snap.Model = ReadModelInfo(d);
+                snap.Asm = new AssemblyInfo();
+            }
+            if (snap.Kind == "Assembly")
+            {
+                ReadAssemblyInfo(d, snap);
+            }
+            if (snap.Kind == "Drawing")
+            {
+                ReadDrawingInfo(d, snap);
+            }
+            ReadOpenDocs(snap);
+            return snap;
+        }
+
+        private Dictionary<string, string> ReadProps(object doc)
+        {
+            Dictionary<string, string> props = new Dictionary<string, string>();
+            try
+            {
+                dynamic d = doc;
+                foreach (PropertySet ps in d.PropertySets)
+                {
+                    foreach (Property p in ps)
+                    {
+                        try
+                        {
+                            string key = Convert.ToString(p.Name);
+                            string val = Convert.ToString(p.Value);
+                            if (!string.IsNullOrEmpty(key) && !props.ContainsKey(key))
+                                props[key] = val ?? "";
+                        }
+                        catch { }
+                    }
+                }
+            }
+            catch { }
+            return props;
+        }
+
+        private string ReadMaterial(dynamic d)
+        {
+            try { return Convert.ToString(d.ComponentDefinition.Material.Name); } catch { return ""; }
+        }
+
+        private ModelInfo ReadModelInfo(dynamic d)
+        {
+            ModelInfo m = new ModelInfo();
+            try
+            {
+                dynamic ma = d.ComponentDefinition.ModelAnnotations;
+                try { m.DimCount = (int)ma.ModelDimensions.Count; } catch { }
+                try { m.FcfCount = (int)ma.ModelFeatureControlFrames.Count; } catch { }
+                try { m.TexCount = (int)ma.ModelSurfaceTextureSymbols.Count; } catch { }
+                try { m.DatumCount = (int)ma.ModelDatumIdentifiers.Count; } catch { }
+                try { m.ThreadNoteCount = (int)ma.ModelHoleThreadNotes.Count; } catch { }
+                if (m.DimCount > 0)
+                {
+                    try
+                    {
+                        int tol = 0;
+                        for (int i = 1; i <= m.DimCount; i++)
+                        {
+                            try
+                            {
+                                dynamic dd = ma.ModelDimensions[i];
+                                dynamic tolObj = dd.Definition.Tolerance;
+                                if (tolObj != null && tolObj.ToleranceType != ToleranceTypeEnum.kDefaultTolerance)
+                                    tol++;
+                            }
+                            catch { m.TolReadable = false; }
+                        }
+                        m.TolCount = tol;
+                    }
+                    catch { m.TolReadable = false; }
+                }
+                if (m.TexCount > 0)
+                {
+                    try { m.FirstTexText = Convert.ToString(ma.ModelSurfaceTextureSymbols[1].Text); } catch { }
+                }
+            }
+            catch { }
+            try
+            {
+                dynamic tf = d.ComponentDefinition.Features.ThreadFeatures;
+                m.ThreadFeatureCount = (int)tf.Count;
+                if (m.ThreadFeatureCount > 0)
+                {
+                    try { m.ThreadDesignation = Convert.ToString(tf[1].Designation); } catch { }
+                }
+            }
+            catch { }
+            try
+            {
+                dynamic ff = d.ComponentDefinition.Features.FilletFeatures;
+                int n = (int)ff.Count;
+                double minR = -1;
+                bool found = false;
+                for (int i = 1; i <= n; i++)
+                {
+                    try
+                    {
+                        double r = (double)ff[i].Radius;
+                        if (r > 0)
+                        {
+                            if (!found || r < minR) minR = r;
+                            found = true;
+                        }
+                    }
+                    catch { }
+                }
+                m.MinFilletReadable = found;
+                m.MinFilletRadiusMM = found ? minR * 10 : -1;
+            }
+            catch { }
+            return m;
+        }
+
+        private void ReadAssemblyInfo(dynamic d, DocSnapshot snap)
+        {
+            AssemblyInfo asm = snap.Asm;
+            try
+            {
+                dynamic occs = d.ComponentDefinition.Occurrences;
+                try { asm.TopLevelCount = (int)occs.Count; } catch { }
+                CollectOccurrenceNames(occs, asm.OccurrenceNames);
+            }
+            catch { }
+            try
+            {
+                dynamic acd = d.ComponentDefinition;
+                ObjectCollection set1 = mApp.TransientObjects.CreateObjectCollection();
+                dynamic occs = acd.Occurrences;
+                int cnt = (int)occs.Count;
+                for (int i = 1; i <= cnt; i++)
+                    set1.Add(occs[i]);
+                dynamic res = acd.AnalyzeInterference(set1, null);
+                int n = (int)res.Count;
+                if (n > 0) asm.InterferenceState = 1;
+                for (int j = 1; j <= n && j <= 50; j++)
+                {
+                    InterferencePair pair = new InterferencePair();
+                    try
+                    {
+                        dynamic ir = res[j];
+                        try { pair.Name1 = Convert.ToString(ir.OccurrenceOne.Name); } catch { }
+                        try { pair.Name2 = Convert.ToString(ir.OccurrenceTwo.Name); } catch { }
+                        try { pair.VolumeCM3 = (double)ir.Volume; } catch { }
+                        asm.Interferences.Add(pair);
+                    }
+                    catch { }
+                }
+            }
+            catch (Exception ex)
+            {
+                asm.InterferenceState = 2;
+                asm.InterferenceError = ex.Message;
+            }
+        }
+
+        private void CollectOccurrenceNames(dynamic occs, List<string> names)
+        {
+            try
+            {
+                int cnt = (int)occs.Count;
+                for (int i = 1; i <= cnt; i++)
+                {
+                    dynamic occ = occs[i];
+                    if (occ == null) continue;
+                    try { names.Add(Convert.ToString(occ.Name)); } catch { }
+                    try
+                    {
+                        dynamic sub = occ.SubOccurrences;
+                        if (sub != null) CollectOccurrenceNames(sub, names);
+                    }
+                    catch { }
+                }
+            }
+            catch { }
+        }
+
+        private void ReadDrawingInfo(dynamic d, DocSnapshot snap)
+        {
+            try
+            {
+                dynamic dd = d;
+                int nSheets = (int)dd.Sheets.Count;
+                for (int i = 1; i <= nSheets; i++)
+                {
+                    SheetInfo sh = new SheetInfo();
+                    try
+                    {
+                        dynamic sheet = dd.Sheets[i];
+                        sh.Name = Convert.ToString(sheet.Name);
+                        try { sh.SheetWidth = (double)sheet.Width; } catch { }
+                        try { sh.SheetHeight = (double)sheet.Height; } catch { }
+
+                        try
+                        {
+                            dynamic bd = sheet.Border;
+                            if (bd != null)
+                            {
+                                sh.HasBorder = true;
+                                try
+                                {
+                                    dynamic box = bd.RangeBox;
+                                    RectD r = new RectD();
+                                    r.L = (double)box.MinPoint.X; r.T = (double)box.MinPoint.Y;
+                                    r.R = (double)box.MaxPoint.X; r.B = (double)box.MaxPoint.Y;
+                                    sh.BorderRect = r;
+                                }
+                                catch { }
+                            }
+                        }
+                        catch { }
+                        try
+                        {
+                            dynamic tb = sheet.TitleBlock;
+                            if (tb != null)
+                            {
+                                sh.HasTitleBlock = true;
+                                try { sh.TitleBlockName = Convert.ToString(tb.Name); } catch { }
+                            }
+                        }
+                        catch { }
+
+                        try
+                        {
+                            dynamic views = sheet.DrawingViews;
+                            sh.ViewCount = (int)views.Count;
+                            for (int j = 1; j <= sh.ViewCount; j++)
+                            {
+                                dynamic vw = views[j];
+                                try
+                                {
+                                    if (!(bool)vw.IsUpdateComplete) sh.UpdateNeeded++;
+                                }
+                                catch { }
+                                try
+                                {
+                                    if ((DrawingViewTypeEnum)vw.ViewType == DrawingViewTypeEnum.kSectionDrawingViewType)
+                                        sh.SectionCount++;
+                                }
+                                catch { }
+                                try
+                                {
+                                    dynamic pos = vw.Position;
+                                    double w = (double)vw.Width, h = (double)vw.Height;
+                                    RectD r = new RectD();
+                                    r.L = (double)pos.X - w / 2; r.R = (double)pos.X + w / 2;
+                                    r.T = (double)pos.Y - h / 2; r.B = (double)pos.Y + h / 2;
+                                    sh.ViewRects.Add(r);
+                                }
+                                catch { }
+                            }
+                        }
+                        catch { }
+
+                        try
+                        {
+                            dynamic dims = sheet.DrawingDimensions;
+                            sh.DimCount = (int)dims.Count;
+                            for (int j = 1; j <= sh.DimCount; j++)
+                            {
+                                dynamic dm = dims[j];
+                                try
+                                {
+                                    if (dm.Tolerance.ToleranceType != ToleranceTypeEnum.kDefaultTolerance)
+                                        sh.DimTolCount++;
+                                }
+                                catch { }
+                                try
+                                {
+                                    if (Convert.ToString(dm.Text.Text).Contains("?")) sh.DimQuestionCount++;
+                                }
+                                catch { }
+                            }
+                        }
+                        catch { }
+
+                        try { sh.FcfCount = (int)sheet.FeatureControlFrames.Count; } catch { }
+                        try { sh.TexCount = (int)sheet.SurfaceTextureSymbols.Count; } catch { }
+                        try { sh.CenterlineCount = (int)sheet.Centerlines.Count; } catch { }
+                        try { sh.BalloonCount = (int)sheet.Balloons.Count; } catch { }
+
+                        try
+                        {
+                            dynamic notes = sheet.DrawingNotes;
+                            int nn = (int)notes.Count;
+                            for (int j = 1; j <= nn; j++)
+                            {
+                                try { sh.NotesTexts.Add(Convert.ToString(notes[j].Text)); } catch { }
+                            }
+                        }
+                        catch { }
+
+                        try
+                        {
+                            for (int j = 1; j <= sh.FcfCount; j++)
+                            {
+                                try
+                                {
+                                    dynamic ann = sheet.FeatureControlFrames[j];
+                                    dynamic p1 = mApp.TransientGeometry.CreatePoint2d();
+                                    dynamic p2 = mApp.TransientGeometry.CreatePoint2d();
+                                    ann.GetBounds(p1, p2);
+                                    RectD r = new RectD();
+                                    r.L = (double)p1.X; r.T = (double)p1.Y; r.R = (double)p2.X; r.B = (double)p2.Y;
+                                    sh.FcfRects.Add(r);
+                                }
+                                catch { }
+                            }
+                            for (int j = 1; j <= sh.TexCount; j++)
+                            {
+                                try
+                                {
+                                    dynamic ann = sheet.SurfaceTextureSymbols[j];
+                                    dynamic p1 = mApp.TransientGeometry.CreatePoint2d();
+                                    dynamic p2 = mApp.TransientGeometry.CreatePoint2d();
+                                    ann.GetBounds(p1, p2);
+                                    RectD r = new RectD();
+                                    r.L = (double)p1.X; r.T = (double)p1.Y; r.R = (double)p2.X; r.B = (double)p2.Y;
+                                    sh.TexRects.Add(r);
+                                }
+                                catch { }
+                            }
+                        }
+                        catch { }
+
+                        snap.Sheets.Add(sh);
+                    }
+                    catch { }
+                }
+            }
+            catch { }
+        }
+
+        private void ReadOpenDocs(DocSnapshot snap)
+        {
+            try
+            {
+                dynamic docs = mApp.Documents;
+                int n = (int)docs.Count;
+                for (int i = 1; i <= n; i++)
+                {
+                    dynamic dd = docs[i];
+                    if (dd == null) continue;
+                    try
+                    {
+                        DocumentTypeEnum t = (DocumentTypeEnum)dd.DocumentType;
+                        if (t != DocumentTypeEnum.kPartDocumentObject) continue;
+                    }
+                    catch { continue; }
+                    DocInfo info = new DocInfo();
+                    try { info.Name = Convert.ToString(dd.DisplayName); } catch { }
+                    info.Props = ReadProps(dd);
+                    info.Material = AppState.GetProp(info.Props, "Material", "材料", "材质");
+                    if (info.Material == "")
+                    {
+                        try { info.Material = Convert.ToString(dd.ComponentDefinition.Material.Name); } catch { }
+                    }
+                    try { info.TexCount = (int)dd.ComponentDefinition.ModelAnnotations.ModelSurfaceTextureSymbols.Count; } catch { }
+                    snap.OpenDocs.Add(info);
+                }
+            }
+            catch { }
+        }
+    }
+}
diff --git a/AddIn/src/SolidWorksLink/SolidWorksHost.cs b/AddIn/src/SolidWorksLink/SolidWorksHost.cs
new file mode 100644
index 0000000..0bb8b82
--- /dev/null
+++ b/AddIn/src/SolidWorksLink/SolidWorksHost.cs
@@ -0,0 +1,326 @@
+using System;
+using System.Collections.Generic;
+using SolidWorks.Interop.sldworks;
+using DesignExpress.Core;
+
+namespace DesignExpress.SolidWorksLink
+{
+    // SolidWorks 适配器: 实现 ICadHost, 把 SW 文档状态拍成 Core 快照
+    public class SolidWorksHost : ICadHost
+    {
+        private ISldWorks mSwApp;
+
+        public SolidWorksHost(ISldWorks swApp)
+        {
+            mSwApp = swApp;
+        }
+
+        public string AppName { get { return "SolidWorks"; } }
+
+        public object GetActiveDocument()
+        {
+            try { return mSwApp.IActiveDoc2; } catch { return null; }
+        }
+
+        public string GetDocType(object doc)
+        {
+            try
+            {
+                // 注意: 不能用 dynamic 调 GetType()(会解析成 Object.GetType), 必须编译时调用
+                ModelDoc2 m = doc as ModelDoc2;
+                if (m != null)
+                {
+                    int t = m.GetType();
+                    if (t == 1) return "Part";      // swDocPART
+                    if (t == 2) return "Assembly";  // swDocASSEMBLY
+                    if (t == 3) return "Drawing";   // swDocDRAWING
+                }
+            }
+            catch { }
+            return "";
+        }
+
+        public void SetStatusText(string text)
+        {
+            try { ((dynamic)mSwApp).SetStatusBarText(text); } catch { }
+        }
+
+        public double PickCylinderDiameterMM(out string faceName)
+        {
+            faceName = "手动输入";
+            try
+            {
+                dynamic doc = mSwApp.IActiveDoc2;
+                if (doc == null) return 0;
+                dynamic selMgr = doc.ISelectionManager;
+                if (selMgr == null) return 0;
+                dynamic face = selMgr.GetSelectedObject6(1, -1);
+                if (face == null) return 0;
+                double[] origin = new double[3];
+                double[] axis = new double[3];
+                double radius = 0;
+                face.IGetCylinderParams(origin, axis, out radius);
+                if (radius > 0) return radius * 2 * 1000;   // 米 -> 毫米
+            }
+            catch { }
+            return 0;
+        }
+
+        public DocSnapshot Capture(object doc)
+        {
+            DocSnapshot snap = new DocSnapshot();
+            dynamic d = doc;
+            snap.Kind = GetDocType(doc);
+            try { snap.Dirty = (bool)d.GetSaveFlag(); } catch { }
+            try { snap.DisplayName = Convert.ToString(d.GetTitle()); } catch { }
+            try
+            {
+                string full = Convert.ToString(d.GetPathName());
+                int p = full.LastIndexOf('\\');
+                if (p > 0) snap.Folder = full.Substring(0, p + 1);
+            }
+            catch { }
+
+            snap.Props = ReadProps(d);
+            snap.MaterialName = ReadMaterial(d);
+
+            if (snap.Kind == "Part" || snap.Kind == "Assembly")
+            {
+                snap.Model = ReadModelInfo(d);
+                snap.Asm = new AssemblyInfo();
+            }
+            if (snap.Kind == "Assembly")
+            {
+                ReadAssemblyInfo(d, snap);
+            }
+            if (snap.Kind == "Drawing")
+            {
+                ReadDrawingInfo(d, snap);
+            }
+            ReadOpenDocs(snap);
+            return snap;
+        }
+
+        private Dictionary<string, string> ReadProps(dynamic d)
+        {
+            Dictionary<string, string> props = new Dictionary<string, string>();
+            try
+            {
+                dynamic ext = d.Extension;
+                dynamic cpm = ext.CustomPropertyManager("");
+                if (cpm != null)
+                {
+                    object names = cpm.GetNames();
+                    if (names is object[])
+                    {
+                        foreach (object n in (object[])names)
+                        {
+                            try
+                            {
+                                string name = Convert.ToString(n);
+                                string val = "", resolved = "";
+                                bool wasResolved = false, link = false;
+                                cpm.Get6(name, false, out val, out resolved, out wasResolved, out link);
+                                if (name != "" && !props.ContainsKey(name))
+                                    props[name] = val ?? "";
+                            }
+                            catch { }
+                        }
+                    }
+                }
+            }
+            catch { }
+            return props;
+        }
+
+        private string ReadMaterial(dynamic d)
+        {
+            try
+            {
+                string mat = "";
+                string config = "";
+                try { config = Convert.ToString(d.ConfigurationManager.ActiveConfiguration.Name); } catch { }
+                if (d.GetMaterialPropertyName2(config, out mat))
+                    return mat ?? "";
+            }
+            catch { }
+            return "";
+        }
+
+        private ModelInfo ReadModelInfo(dynamic d)
+        {
+            ModelInfo m = new ModelInfo();
+            // 最小圆角(遍历特征中的 Fillet)
+            try
+            {
+                dynamic fm = d.FeatureManager;
+                dynamic feat = fm.GetFirstFeature();
+                double minR = -1;
+                bool found = false;
+                while (feat != null)
+                {
+                    try
+                    {
+                        string tn = Convert.ToString(feat.GetTypeName2());
+                        if (tn == "Fillet")
+                        {
+                            dynamic fd = feat.GetDefinition();
+                            double r = (double)fd.Radius;
+                            if (r > 0)
+                            {
+                                if (!found || r < minR) minR = r;
+                                found = true;
+                            }
+                        }
+                    }
+                    catch { }
+                    feat = feat.GetNextFeature();
+                }
+                m.MinFilletReadable = found;
+                m.MinFilletRadiusMM = found ? minR * 1000 : -1;
+            }
+            catch { }
+            return m;
+        }
+
+        private void ReadAssemblyInfo(dynamic d, DocSnapshot snap)
+        {
+            AssemblyInfo asm = snap.Asm;
+            try
+            {
+                dynamic comps = d.GetComponents(false);
+                if (comps is object[])
+                {
+                    asm.TopLevelCount = ((object[])comps).Length;
+                    CollectComponentNames(comps, asm.OccurrenceNames);
+                }
+            }
+            catch { }
+            try
+            {
+                object comps = d.GetComponents(false);
+                object pComp = null, pFace = null;
+                d.ToolsCheckInterference2(0, comps, true, out pComp, out pFace);
+                if (pComp is object[])
+                {
+                    int n = ((object[])pComp).Length;
+                    if (n > 0)
+                    {
+                        asm.InterferenceState = 1;
+                        for (int i = 0; i < n && i < 50; i++)
+                        {
+                            InterferencePair pair = new InterferencePair();
+                            try
+                            {
+                                dynamic c1 = ((object[])pComp)[i];
+                                dynamic c2 = null;
+                                if (pFace is object[] && i < ((object[])pFace).Length)
+                                    c2 = ((object[])pFace)[i];
+                                try { pair.Name1 = Convert.ToString(c1.Name2); } catch { }
+                                try { pair.Name2 = Convert.ToString(c2.Name2); } catch { }
+                                asm.Interferences.Add(pair);
+                            }
+                            catch { }
+                        }
+                    }
+                }
+            }
+            catch (Exception ex)
+            {
+                asm.InterferenceState = 2;
+                asm.InterferenceError = ex.Message;
+            }
+        }
+
+        private void CollectComponentNames(object comps, List<string> names)
+        {
+            try
+            {
+                foreach (object c in (object[])comps)
+                {
+                    try
+                    {
+                        dynamic comp = c;
+                        names.Add(Convert.ToString(comp.Name2));
+                        object children = comp.GetChildren();
+                        if (children is object[] && ((object[])children).Length > 0)
+                            CollectComponentNames(children, names);
+                    }
+                    catch { }
+                }
+            }
+            catch { }
+        }
+
+        private void ReadDrawingInfo(dynamic d, DocSnapshot snap)
+        {
+            try
+            {
+                object sheetNamesObj = d.GetSheetNames();
+                string[] sheetNames = null;
+                if (sheetNamesObj is string[]) sheetNames = (string[])sheetNamesObj;
+                if (sheetNamesObj is object[]) sheetNames = Array.ConvertAll((object[])sheetNamesObj, o => Convert.ToString(o));
+                if (sheetNames == null || sheetNames.Length == 0) return;
+                foreach (string sn in sheetNames)
+                {
+                    SheetInfo sh = new SheetInfo();
+                    sh.Name = sn;
+                    try
+                    {
+                        d.ActivateSheet(sn);
+                        dynamic views = d.GetViews();
+                        if (views is object[])
+                        {
+                            sh.ViewCount = ((object[])views).Length;
+                            foreach (object v in (object[])views)
+                            {
+                                try
+                                {
+                                    dynamic view = v;
+                                    object notes = view.GetNotes();
+                                    if (notes is object[])
+                                    {
+                                        foreach (object n in (object[])notes)
+                                        {
+                                            try { sh.NotesTexts.Add(Convert.ToString(((dynamic)n).GetText())); } catch { }
+                                        }
+                                    }
+                                }
+                                catch { }
+                            }
+                        }
+                    }
+                    catch { }
+                    snap.Sheets.Add(sh);
+                }
+            }
+            catch { }
+        }
+
+        private void ReadOpenDocs(DocSnapshot snap)
+        {
+            try
+            {
+                object docs = mSwApp.GetDocuments();
+                if (!(docs is object[])) return;
+                foreach (object d in (object[])docs)
+                {
+                    DocInfo info = new DocInfo();
+                    dynamic dd = d;
+                    try { info.Name = Convert.ToString(dd.GetTitle()); } catch { }
+                    try
+                    {
+                        int t = (int)dd.GetType();
+                        if (t != 1) continue;
+                    }
+                    catch { continue; }
+                    info.Props = ReadProps(dd);
+                    info.Material = AppState.GetProp(info.Props, "Material", "材料", "材质");
+                    if (info.Material == "") info.Material = ReadMaterial(dd);
+                    snap.OpenDocs.Add(info);
+                }
+            }
+            catch { }
+        }
+    }
+}
diff --git a/AddIn/src/SolidWorksLink/SwAddinServer.cs b/AddIn/src/SolidWorksLink/SwAddinServer.cs
new file mode 100644
index 0000000..b30008b
--- /dev/null
+++ b/AddIn/src/SolidWorksLink/SwAddinServer.cs
@@ -0,0 +1,283 @@
+using System;
+using System.IO;
+using System.Reflection;
+using System.Runtime.InteropServices;
+using SolidWorks.Interop.sldworks;
+using SolidWorks.Interop.swpublished;
+using DesignExpress.Core;
+
+[assembly: ComVisible(true)]
+
+namespace DesignExpress.SolidWorksLink
+{
+    // SolidWorks 加载项外壳: 实现 ISwAddin, 延迟创建 CommandManager 选项卡, 回调全部转到 Core
+    [Guid("4A7E023E-EDD8-4642-B337-425E02394C81")]
+    [ComVisible(true)]
+    [ClassInterface(ClassInterfaceType.AutoDual)]
+    [ProgId("DesignExpress.SolidWorksLink.SwAddin")]
+    public class SwAddin : ISwAddin
+    {
+        private const string AddinClsid = "{4A7E023E-EDD8-4642-B337-425E02394C81}";
+        private const string Title = "Design Express Res";
+        private const int GroupId = 23130;
+        private ISldWorks mSwApp;
+        private int mCookie;
+        private DSldWorksEvents_Event mSwEvents;
+        private ICommandGroup mCmdGroup;
+        private int[] mCmdIndexes;
+        private readonly object mTabLock = new object();
+
+        static SwAddin()
+        {
+            // COM 激活的程序集依赖按宿主进程目录探测, 手动解析同目录的 Core.dll
+            AppDomain.CurrentDomain.AssemblyResolve += delegate(object sender, ResolveEventArgs args)
+            {
+                try
+                {
+                    string name = new AssemblyName(args.Name).Name;
+                    if (name == "DesignExpress.Core")
+                    {
+                        string dir = Path.GetDirectoryName(typeof(SwAddin).Assembly.Location);
+                        string path = Path.Combine(dir, "DesignExpress.Core.dll");
+                        if (File.Exists(path)) return Assembly.LoadFrom(path);
+                    }
+                }
+                catch { }
+                return null;
+            };
+        }
+
+        public bool ConnectToSW(object ThisSW, int cookie)
+        {
+            try
+            {
+                mSwApp = (ISldWorks)ThisSW;
+                mCookie = cookie;
+                AppState.Host = new SolidWorksHost(mSwApp);
+                // 关键: SW 启动早期命令系统未就绪, 命令组/选项卡延迟到文档激活事件创建
+                try
+                {
+                    mSwEvents = (DSldWorksEvents_Event)mSwApp;
+                    mSwEvents.ActiveDocChangeNotify += OnActiveDocChange;
+                }
+                catch { }
+                EnsureAll();
+                return true;
+            }
+            catch { return false; }
+        }
+
+        private int OnActiveDocChange()
+        {
+            EnsureAll();
+            return 0;
+        }
+
+        private void EnsureAll()
+        {
+            lock (mTabLock)
+            {
+                try
+                {
+                    if (mCmdGroup == null)
+                    {
+                        SetupCommandGroup();
+                        Log("SetupCommandGroup: " + (mCmdGroup != null ? "OK" : "NULL"));
+                    }
+                    if (mCmdGroup != null)
+                    {
+                        // 每次文档激活都幂等确保选项卡存在(文档切换时 SW 可能清除 addin 选项卡)
+                        AddCommandManagerTabs();
+                    }
+                    MakeTabVisible();
+                }
+                catch (Exception ex) { Log("EnsureAll 异常: " + ex.Message); }
+            }
+        }
+
+        public bool DisconnectFromSW()
+        {
+            Log("DisconnectFromSW 被调用!");
+            try
+            {
+                ICommandManager cmdMgr = mSwApp.GetCommandManager(mCookie);
+                cmdMgr.RemoveCommandGroup2(GroupId, true);
+            }
+            catch { }
+            return true;
+        }
+
+        // 启用回调: 返回 1 = 命令始终可用
+        public int EnableMethod() { return 1; }
+
+        // 创建命令组+命令项(菜单可用), 选项卡延迟创建
+        private void SetupCommandGroup()
+        {
+            try
+            {
+                ICommandManager cmdMgr = mSwApp.GetCommandManager(mCookie);
+                mSwApp.SetAddinCallbackInfo(0, this, mCookie);
+
+                string iconList = "";
+                try { iconList = SwIcons.EnsureIcons(); } catch { }
+
+                ICommandGroup grp = cmdMgr.CreateCommandGroup(GroupId, Title, Title, "", -1);
+                if (grp == null) return;
+
+                if (iconList != "")
+                {
+                    try { grp.LargeIconList = iconList; } catch { }
+                    try { grp.SmallIconList = iconList; } catch { }
+                }
+
+                int[] idx = new int[9];
+                idx[0] = grp.AddCommandItem2("零件检查", -1, "对当前零件进行三维标注、公差配合、GMP 检查", "零件检查", 0, "PartCheck", "EnableMethod", 0, 1);
+                idx[1] = grp.AddCommandItem2("装配检查", -1, "对当前装配进行 GMP、密封、干涉、外购件检查", "装配检查", 1, "AssemblyCheck", "EnableMethod", 1, 1);
+                idx[2] = grp.AddCommandItem2("工程图检查", -1, "对当前工程图进行标注与 spec 技术要求检查", "工程图检查", 2, "DrawingCheck", "EnableMethod", 2, 1);
+                idx[3] = grp.AddCommandItem2("导出报告", -1, "导出检查报告(Excel/CSV)", "导出报告", 3, "ExportReport", "EnableMethod", 3, 1);
+                idx[4] = grp.AddCommandItem2("使用说明", -1, "查看检查项清单与使用说明", "使用说明", 4, "Help", "EnableMethod", 4, 1);
+                idx[5] = grp.AddCommandItem2("卡簧槽查询", -1, "轴用/孔用弹性挡圈槽尺寸查询 (GB/T 894)", "卡簧槽查询", 5, "CirclipQuery", "EnableMethod", 5, 1);
+                idx[6] = grp.AddCommandItem2("键槽查询", -1, "平键键槽尺寸查询 (GB/T 1095)", "键槽查询", 6, "KeywayQuery", "EnableMethod", 6, 1);
+                idx[7] = grp.AddCommandItem2("O型密封圈查询", -1, "O 型密封圈设计与沟槽尺寸查询 (GB/T 3452.1)", "O型密封圈查询", 7, "OringQuery", "EnableMethod", 7, 1);
+                idx[8] = grp.AddCommandItem2("轴承挡圈查询", -1, "轴承挡圈与挡边设计查询", "轴承挡圈查询", 8, "BearingRingQuery", "EnableMethod", 8, 1);
+
+                try { grp.HasToolbar = true; } catch { }
+                try { grp.HasMenu = true; } catch { }
+                grp.Activate();
+
+                mCmdGroup = grp;
+                mCmdIndexes = idx;
+            }
+            catch { }
+        }
+
+        // 文档激活后创建 CommandManager 选项卡(SW 命令系统就绪后)
+        private void AddCommandManagerTabs()
+        {
+            try
+            {
+                ICommandManager cmdMgr = mSwApp.GetCommandManager(mCookie);
+                foreach (int docType in new int[] { 1, 2, 3 })
+                {
+                    try
+                    {
+                        ICommandTab cmdTab = cmdMgr.GetCommandTab(docType, Title);
+                        if (cmdTab == null)
+                        {
+                            cmdTab = cmdMgr.AddCommandTab(docType, Title);
+                        }
+                        if (cmdTab != null)
+                        {
+                            // 幂等: 已有命令则不重复添加, 避免按钮重复
+                            int boxCount = cmdTab.GetCommandTabBoxCount();
+                            bool hasCommands = false;
+                            if (boxCount > 0)
+                            {
+                                object boxes = cmdTab.CommandTabBoxes();
+                                if (boxes is object[])
+                                {
+                                    foreach (object b in (object[])boxes)
+                                    {
+                                        try
+                                        {
+                                            dynamic box = b;
+                                            object ids = null, tts = null;
+                                            if (box.GetCommands(out ids, out tts) > 0) hasCommands = true;
+                                        }
+                                        catch { }
+                                    }
+                                }
+                            }
+                            if (hasCommands)
+                            {
+                                Log("docType=" + docType + " 已有命令, 跳过");
+                            }
+                            else
+                            {
+                                ICommandTabBox cmdBox = cmdTab.AddCommandTabBox();
+                                int[] cmdIDs = new int[mCmdIndexes.Length];
+                                int[] textType = new int[mCmdIndexes.Length];
+                                for (int i = 0; i < mCmdIndexes.Length; i++)
+                                {
+                                    cmdIDs[i] = mCmdGroup.CommandID[mCmdIndexes[i]];
+                                    textType[i] = 2;   // swCommandTabButton_TextBelow
+                                }
+                                cmdBox.AddCommands(cmdIDs, textType);
+                                Log("docType=" + docType + " AddCommands 9 个");
+                            }
+                        }
+                    }
+                    catch { }
+                }
+            }
+            catch { }
+        }
+
+        // 文档扩展: 设置选项卡可见并激活(仅运行时创建时可能需强制显示)
+        private void MakeTabVisible()
+        {
+            try
+            {
+                ModelDoc2 doc = mSwApp.IActiveDoc2;
+                if (doc == null) { Log("MakeTabVisible: 无文档"); return; }
+                ModelDocExtension ext = doc.Extension;
+                if (ext == null) return;
+                object tabs = ext.GetCommandTabs();
+                if (tabs is string[])
+                {
+                    string[] names = (string[])tabs;
+                    Log("GetCommandTabs 共 " + names.Length + " 个");
+                    for (int i = 0; i < names.Length; i++)
+                    {
+                        Log("  Tab[" + i + "]=" + names[i]);
+                        if (names[i] == Title)
+                        {
+                            ext.set_CommandTabVisible(i, true);
+                            try
+                            {
+                                ICommandManager cmdMgr = mSwApp.GetCommandManager(mCookie);
+                                dynamic ourTab = cmdMgr.GetCommandTab(1, Title);
+                                if (ourTab != null) { ourTab.Active = true; Log("tab.Active=true"); }
+                                else { Log("GetCommandTab 返回 null"); }
+                            }
+                            catch (Exception ex) { Log("tab.Active 失败: " + ex.Message); }
+                            try { ext.ActiveCommandTab = Title; Log("ActiveCommandTab 已设"); } catch (Exception ex) { Log("ActiveCommandTab 失败: " + ex.Message); }
+                            return;
+                        }
+                    }
+                    Log("未找到 " + Title);
+                }
+            }
+            catch (Exception ex) { Log("MakeTabVisible 异常: " + ex.Message); }
+        }
+
+        private static void Log(string msg)
+        {
+            try
+            {
+                System.IO.File.AppendAllText(
+                    System.IO.Path.Combine(System.IO.Path.GetTempPath(), "DesignExpress_SW.log"),
+                    DateTime.Now.ToString("HH:mm:ss.fff") + " " + msg + System.Environment.NewLine);
+            }
+            catch { }
+        }
+
+        // ============ 命令回调(公开方法, SW 通过 IDispatch 调用) ============
+
+        public void PartCheck() { Safe(Checks.PartCheck); }
+        public void AssemblyCheck() { Safe(Checks.AssemblyCheck); }
+        public void DrawingCheck() { Safe(Checks.DrawingCheck); }
+        public void ExportReport() { Safe(Checks.ExportReport); }
+        public void Help() { Safe(Checks.Help); }
+        public void CirclipQuery() { Safe(Checks.CirclipQuery); }
+        public void KeywayQuery() { Safe(Checks.KeywayQuery); }
+        public void OringQuery() { Safe(Checks.OringQuery); }
+        public void BearingRingQuery() { Safe(Checks.BearingRingQuery); }
+
+        private static void Safe(Action action)
+        {
+            try { action(); }
+            catch (Exception ex) { System.Windows.Forms.MessageBox.Show("执行出错: " + ex.Message); }
+        }
+    }
+}
diff --git a/AddIn/src/SolidWorksLink/SwIcons.cs b/AddIn/src/SolidWorksLink/SwIcons.cs
new file mode 100644
index 0000000..0407184
--- /dev/null
+++ b/AddIn/src/SolidWorksLink/SwIcons.cs
@@ -0,0 +1,34 @@
+using System;
+using System.IO;
+using DesignExpress.Core;
+
+namespace DesignExpress.SolidWorksLink
+{
+    // SolidWorks 命令图标条: 复用 Core.ToolIcons(仓鼠品牌+功能符号), 生成 9 格 BMP
+    public static class SwIcons
+    {
+        public static string EnsureIcons()
+        {
+            try
+            {
+                string dir = Path.GetDirectoryName(typeof(SwIcons).Assembly.Location);
+                string file = Path.Combine(dir, "DesignExpress_icons.bmp");
+                if (File.Exists(file)) return file;
+                ToolIcon[] icons = new ToolIcon[]
+                {
+                    ToolIcon.Part,      // 零件检查
+                    ToolIcon.Asm,       // 装配检查
+                    ToolIcon.Drw,       // 工程图检查
+                    ToolIcon.Export,    // 导出报告
+                    ToolIcon.Help,      // 使用说明
+                    ToolIcon.Circlip,   // 卡簧槽查询
+                    ToolIcon.Keyway,    // 键槽查询
+                    ToolIcon.Oring,     // O型密封圈查询
+                    ToolIcon.Bearing    // 轴承挡圈查询
+                };
+                return ToolIcons.CreateStripBmp(icons, 32, file);
+            }
+            catch { return ""; }
+        }
+    }
+}
diff --git a/README.md b/README.md
new file mode 100644
index 0000000..7e16c96
--- /dev/null
+++ b/README.md
@@ -0,0 +1,113 @@
+# Design Express Res — CAD 设计标注检查与设计数据查询工具
+
+基于 **Core + Link 架构**（类似 COMSOL LiveLink）：独立核心库与 CAD 完全解耦，Inventor / SolidWorks 各自通过 Link 适配层调用 Core 功能。
+
+## 架构
+
+```
+┌────────────────────────────────────────────┐
+│ DesignExpress.Core.dll (独立核心, 不依赖CAD) │
+│  - KB 知识库 (GB/T 275/1800/1801/894/1095)  │
+│  - CheckEngine 检查引擎 (P/A/D 三阶段)       │
+│  - DesignQuery 设计数据查询 (键槽/卡簧槽已实装)│
+│  - UI: MainForm/QueryForm/FitForm           │
+│  - Report 报告 (Excel/CSV)                  │
+│  - ICadHost 抽象接口 + DocSnapshot 快照      │
+│  - ToolIcons 共享图标(仓鼠品牌+功能符号)      │
+└────────────────────────────────────────────┘
+      ▲              ▲
+  InventorLink    SolidWorksLink
+  (已交付)        (已交付)
+```
+
+- **ICadHost 接口**：`GetActiveDocument / GetDocType / Capture / PickCylinderDiameterMM / SetStatusText`
+- **DocSnapshot 快照**：Link 层把 CAD 文档状态拍成纯数据，Core 只处理快照
+- 新增 CAD 支持 = 实现一个 ICadHost + 该 CAD 的选项卡壳
+
+## 功能
+
+| 系统 | 内容 |
+|------|------|
+| 设计检查 | 零件(标注/公差配合GB/T 275/形位/粗糙度/螺纹/物料接触GMP/表面处理/强度指引)、装配(GMP材料/密封/清洁/静态干涉/外购件/电气西门子/动力)、工程图(图框/视图/尺寸公差/22项spec关键词检查) |
+| 设计数据查询 | 键槽(GB/T 1095)、卡簧槽(GB/T 894.1)已实装; O型密封圈(GB/T 3452.1)、轴承挡圈规划中 |
+
+## 部署
+
+### Inventor
+1. 复制 `AddIn/deploy` 文件夹到目标机器
+2. 右键 `install.ps1` → **使用 PowerShell 运行**（无需管理员）
+3. 重启 Inventor，功能区出现 **[Design Express Res]** 选项卡
+
+### SolidWorks
+1. 复制 `AddIn/deploy` 文件夹
+2. 运行 `install_solidworks.ps1`（用户级注册）
+3. **首次需管理员执行两条 reg add**（脚本末尾有提示）：
+   - `HKLM\SOFTWARE\SolidWorks\AddIns\{4A7E023E-...}` 键（default=1, Title）
+4. 启动 SolidWorks → 工具→插件 勾选 Design Express Res
+5. 打开零件 → 出现选项卡 → **正常退出并重启一次**（持久化选项卡定义）
+
+## 文件清单
+
+| 路径 | 说明 |
+|------|------|
+| `AddIn/deploy/DesignExpress.Core.dll` | 独立核心（成品） |
+| `AddIn/deploy/DesignExpress.InventorLink.dll` | Inventor 适配层（成品） |
+| `AddIn/deploy/DesignExpress.SolidWorksLink.dll` | SolidWorks 适配层（成品） |
+| `AddIn/deploy/install.ps1` | Inventor 一键部署脚本 |
+| `AddIn/deploy/install_solidworks.ps1` | SolidWorks 部署脚本 |
+| `AddIn/src/Core/*.cs` | 核心源码（ICadHost/Snapshots/KB/CheckEngine/DesignQuery/UI/ToolIcons） |
+| `AddIn/src/InventorLink/*.cs` | Inventor 适配源码 |
+| `AddIn/src/SolidWorksLink/*.cs` | SolidWorks 适配源码 |
+
+## 关键技术点
+
+### Inventor
+- **按钮点击**：`ButtonDefinition.OnExecute` 事件（不依赖 ExecuteCommand 路由）
+- **加载规则**：`AddInLoadRules` 二进制文件控制加载，install.ps1 自动修复（DWORD=0 允许加载）
+
+### SolidWorks
+- **延迟创建**：命令组/选项卡在**文档激活事件**（`ActiveDocChangeNotify`）中创建——SW 启动早期命令系统未就绪，ConnectToSW 时创建会静默失败
+- **EnableMethod 回调**：命令必须提供启用方法（返回 1），否则 SW 禁用命令导致按钮不可见
+- **tab.Active = true**：选项卡可见性 + 激活必须直接设置，否则不显示在选项卡栏
+- **持久化**：SW 正常退出时把选项卡定义写入注册表，重启后读取显示
+- **GetDocType 注意**：不能 `dynamic.GetType()`（解析成 Object.GetType），必须编译时调用
+
+### 通用
+- **窗口**：1/4 屏幕面积，TableLayoutPanel 百分比布局，无固定尺寸不遮罩
+- **报告**：Excel COM 动态调用，未装 Excel 回退 CSV
+- **图标**：ToolIcons 共享生成（功能符号集中式），SolidWorks 用 9 格 BMP 图标条；Inventor 因 AddButtonDefinition 对 IPictureDisp 兼容性问题暂用文字按钮（可后续手动补图标）
+
+## 建议的 iProperties 自定义属性
+
+| 属性名 | 取值示例 | 用途 |
+|--------|----------|------|
+| 物料接触 | 直接接触 / 间接接触 / 非接触 | 触发 GMP 专项检查 |
+| 表面处理 | 镀镍+磨削 / 抛光 / 发黑 | 表面处理检查 |
+| 材料 | 316L / 304 / PTFE | GMP 材料判定 |
+
+## 编译
+
+```powershell
+# Core (无 CAD 依赖)
+csc /target:library /platform:x64 /codepage:65001 /out:DesignExpress.Core.dll ^
+  /r:System.Windows.Forms.dll /r:System.Drawing.dll /r:Microsoft.CSharp.dll /r:System.Core.dll ^
+  src\Core\*.cs
+
+# Inventor Link
+csc /target:library /platform:x64 /codepage:65001 /out:DesignExpress.InventorLink.dll ^
+  /r:DesignExpress.Core.dll /r:"<Inventor>\Bin\Public Assemblies\Autodesk.Inventor.Interop.dll" ^
+  /r:System.Windows.Forms.dll /r:System.Drawing.dll /r:Microsoft.CSharp.dll /r:System.Core.dll ^
+  src\InventorLink\*.cs
+
+# SolidWorks Link
+csc /target:library /platform:x64 /codepage:65001 /out:DesignExpress.SolidWorksLink.dll ^
+  /r:DesignExpress.Core.dll /r:"<SW>\SolidWorks.Interop.sldworks.dll" ^
+  /r:"<SW>\SolidWorks.Interop.swpublished.dll" /r:"<SW>\SolidWorks.Interop.swconst.dll" ^
+  /r:System.Windows.Forms.dll /r:System.Drawing.dll /r:Microsoft.CSharp.dll /r:System.Core.dll ^
+  src\SolidWorksLink\*.cs
+```
+
+## 版本历史
+
+- **1.3.0** (2026-08-21): SolidWorks Link 交付; 功能图标(集中式功能符号); 生产版代码清理
+- **1.3.1** (2026-08-22): 清理调试代码与临时文件; Inventor 图标方案(IPictureDisp)因 API 兼容性暂缓, 保留文字按钮